CDCE813-Q1

활성

2.5V 및 3.3V 출력을 지원하는 프로그래머블 1-PLL 클록 신시사이저 및 지터 클리너

지금 주문하기

데이터 시트

document-pdfAcrobat CDCE813-Q1 Programmable 1-PLL Clock Synthesizer and Jitter Cleaner With 2.5V and 3.3V Outputs datasheet (Rev. D) (영어) PDF | HTML

CDCE813-Q1

활성

데이터 시트

지금 주문하기

제품 상세 정보

Number of input channels

1

Number of outputs

3

RMS jitter (fs)

50000

Features

Integrated EEPROM

Output frequency (min) (MHz)

0.07

Output frequency (max) (MHz)

230

Output type

LVCMOS

Input type

LVCMOS (REF_CLK)

Operating temperature range (°C)

-40 to 105

Number of input channels

1

Number of outputs

3

RMS jitter (fs)

50000

Features

Integrated EEPROM

Output frequency (min) (MHz)

0.07

Output frequency (max) (MHz)

230

Output type

LVCMOS

Input type

LVCMOS (REF_CLK)

Operating temperature range (°C)

-40 to 105

TSSOP (PW)

14

32 mm² (5 mm × 6.4 mm)

Qualified for automotive applications
AEC-Q100 qualified with the following results:
- Device temperature grade 2: –40°C to 105°C ambient operating temperature range
- Device HBM ESD classification level H2
- Device CDM ESD classification level C6
In-system programmability and EEPROM
- Serial programmable volatile register
- Nonvolatile EEPROM to store customer settings
Flexible input clocking concept
- External crystal: 8MHz to 32MHz
- Single-ended LVCMOS up to 160MHz
Free selectable output frequency up to 230 MHz
Low-noise PLL core
- PLL loop filter components integrated
- Low period jitter (typical 50ps)
1.8V device power supply (core voltage)
Separate output supply pins: 3.3V and 2.5V
Flexible clock driver
- Three user-definable control inputs [S0, S1, S2], for example, SSC selection, frequency switching, output enable, or power down
- Generates highly accurate clocks for video, audio, USB, IEEE1394, RFID, Bluetooth, WLAN, Ethernet, and GPS
- Generates common clock frequencies used with TI- DaVinci™, OMAP™, DSPs
- Programmable SSC modulation
- Enables 0PPM clock generation
Packaged in TSSOP
Development and programming kit for easy PLL design and programming (TI ClockPro™ programming software)

Qualified for automotive applications
AEC-Q100 qualified with the following results:
- Device temperature grade 2: –40°C to 105°C ambient operating temperature range
- Device HBM ESD classification level H2
- Device CDM ESD classification level C6
In-system programmability and EEPROM
- Serial programmable volatile register
- Nonvolatile EEPROM to store customer settings
Flexible input clocking concept
- External crystal: 8MHz to 32MHz
- Single-ended LVCMOS up to 160MHz
Free selectable output frequency up to 230 MHz
Low-noise PLL core
- PLL loop filter components integrated
- Low period jitter (typical 50ps)
1.8V device power supply (core voltage)
Separate output supply pins: 3.3V and 2.5V
Flexible clock driver
- Three user-definable control inputs [S0, S1, S2], for example, SSC selection, frequency switching, output enable, or power down
- Generates highly accurate clocks for video, audio, USB, IEEE1394, RFID, Bluetooth, WLAN, Ethernet, and GPS
- Generates common clock frequencies used with TI- DaVinci™, OMAP™, DSPs
- Programmable SSC modulation
- Enables 0PPM clock generation
Packaged in TSSOP
Development and programming kit for easy PLL design and programming (TI ClockPro™ programming software)

The CDCE813-Q1 device is a modular Phase-locked-loop-based (PLL), low-cost, high-performance, programmable clock synthesizers. They generate up to three output clocks from a single input frequency. Each output can be programmed in-system for any clock frequency up to 230MHz, using the integrated configurable PLL.

The CDCE813-Q1 has separate output supply pins, VDDOUT, providing 2.5V to 3.3V.

The input accepts an external crystal or LVCMOS clock signal. A selectable on-chip VCXO allows synchronization of the output frequency to an external control signal.

The PLL supports SSC (spread-spectrum clocking) for better electromagnetic interference (EMI) performance.

The device supports nonvolatile EEPROM programming for easy customization of the device to the application. All device settings are programmable through the I2C bus, a 2-wire serial interface.

The CDCE813-Q1 operates in a 1.8V core environment as well as eliminating the need for additional, independent XTAL oscillators which reduces component count and board size. The device operates in a temperature range of –40°C to 105°C.

The CDCE813-Q1 device is a modular Phase-locked-loop-based (PLL), low-cost, high-performance, programmable clock synthesizers. They generate up to three output clocks from a single input frequency. Each output can be programmed in-system for any clock frequency up to 230MHz, using the integrated configurable PLL.

The CDCE813-Q1 has separate output supply pins, VDDOUT, providing 2.5V to 3.3V.

The input accepts an external crystal or LVCMOS clock signal. A selectable on-chip VCXO allows synchronization of the output frequency to an external control signal.

The PLL supports SSC (spread-spectrum clocking) for better electromagnetic interference (EMI) performance.

The device supports nonvolatile EEPROM programming for easy customization of the device to the application. All device settings are programmable through the I2C bus, a 2-wire serial interface.

The CDCE813-Q1 operates in a 1.8V core environment as well as eliminating the need for additional, independent XTAL oscillators which reduces component count and board size. The device operates in a temperature range of –40°C to 105°C.

filter

기타 클록 지터 클리너 찾기

다운로드 스크립트와 함께 비디오 보기 비디오