CSD18563Q5A
- Ultra-Low Qg and Qgd
- Soft Body Diode for Reduced Ringing
- Low Thermal Resistance
- Avalanche Rated
- Logic Level
- Pb-Free Terminal Plating
- RoHS Compliant
- Halogen Free
- SON 5 mm × 6 mm Plastic Package
This 5.7 mΩ, 60 V SON 5 mm × 6 mm NexFET power MOSFET was designed to pair with the CSD18537NQ5A control FET and act as the sync FET for a complete industrial buck converter chipset solution.
관심 가지실만한 유사 제품
비교 대상 장치와 유사한 기능.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS40170EVM-597 — NexFET™를 지원하는 TPS40170 동기식 PWM 벅 컨트롤러 평가 모듈
The TPS40170EVM-597 is a fully assembled and tested circuit for evaluating the TPS40170 synchronous step-down controller with two NexFET devices CSD18537NQ5A and CSD18563Q5A. The TPS40170EVM-597 operates from a 10V to 36V input (24V nominal) and provides a 5V output up to 10A.
LOAD-SWITCH-FET-LOSS-CALC — Power Loss Calculation Tool for Load Switch
NONSYNC-BOOST-FET-LOSS-CALC — NONSYNC BOOST FET LOSS Calculator
FET-SOA-CALC-SELECT — MOSFET SOA calculation and selection tool
MOTOR-DRIVE-FET-LOSS-CALC — Power Loss Calculation Tool for BLDC Motor Drive
SLPR053 — Power Loss Calculation Tool for Synchronous Inverting Buck Boost Converter
SYNC-BOOST-FET-LOSS-CALC — Power Loss Calculation Tool for Synchronous Boost Converter
MOSFET power loss calculator for synchronous boost converter applications.
SYNC-BUCK-FET-LOSS-CALC — Power Loss Calculation Tool for Synchronous Buck Converter
PMP10081 — 20W SEPIC 저비용 납산 배터리 충전기 레퍼런스 디자인
The PMP10081 reference design shows a simple and low-cost solution of a lead acid battery charger. The input voltage range is from 9V to 36V and the maximum output voltage is 13.8V, which is sufficient for a six-cell lead acid battery with a charge current up to 1.5A.
PMP10324 — 38V@2A 동기식 부스트 레퍼런스 디자인
The PMP10324 sync-boost reference design provides 38V @ 2A over a wide input range covering the 24V rail. It uses dual external FETs to achieve a full load efficiency of 97% at 24Vin. This design uses minimal footprint parts with all ceramic capacitors.
PMP10852 — 12V@15A 출력에 고전력 소형 폼 팩터 동기 벅 레퍼런스 디자인
The PMP10852 reference design uses the LM5117, CSD18563 for the high side MOSFET and CSD18532 (x2) for the low side MOSFETs. PMP10852 takes input voltages between 27V to 41V and outputs 180W(12V @15A). The size is very small, total area is 1,200mm2 (30mm x 40mm) solution size. The (...)
PMP10852B — 12V@15A 출력에 고전력 소형 폼 팩터 동기 벅 레퍼런스 디자인
The PMP10852B reference design uses the LM5117, CSD18563 for the high side MOSFET and CSD18532 (x2) for the low side MOSFETs. PMP10852B takes input voltages between 27V to 41V and outputs 180W(12V @15A). The size is very small, total area is 1,200mm2 (30mm x 40mm) solution size. The (...)
TIDA-00675 — 동적 스위칭을 사용한 절전 레퍼런스 디자인
The TIDA-00675 shows the power reduction benefits of dynamically switching a load on/off using a load switch. The design guide shows how frequency of switching, duty cycle, and the use of a discharge resistor can have an impact on power consumption.
TIDA-01095 — 자연광 하베스팅 및 무선 연결을 지원하는 100W 조광 가능 DC-DC LED 드라이버 레퍼런스 디자인
TIDA-01179 — 콜드 크랭크 작동 및 과도 보호를 지원하는 오토모티브 넓은 Vin 프론트 엔드 전원 레퍼런스 디자인
TIDA-01179 레퍼런스 설계는 12V 자동차 배터리에 최대 30W의 출력을 공급할 수 있는 차량용 프론트 엔드 전원 공급 장치입니다. 첫 번째 단계는 ISO 7637-2 및 ISO 16750-2 표준에 지정된 12V 배터리 조건의 전체 DC 범위에서 안정적인 15V 출력 전압을 유지하는 벅-부스트 DC/DC 컨버터입니다 두 번째 단계는 최대 20W 출력을 지원하는 소형 벅 컨버터입니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VSONP (DQJ) | 8 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.