LM137JAN-SP
- Output Voltage Adjustable from −37V to −1.2V
- 1.5A Output Current Specified, −55°C to +150°C
- Line Regulation Typically 0.01%/V
- Load Regulation Typically 0.3%
- Excellent Thermal Regulation, 0.002%/W
- 77 dB Ripple Rejection
- Excellent Rejection of Thermal Transients
- 50 ppm/°C Temperature Coefficient
- Temperature-independent Current Limit
- Internal Thermal Overload Protection
- Standard 3-lead Transistor Package
- Output is Short Circuit Protected
All trademarks are the property of their respective owners.
The LM137 are adjustable 3-terminal negative voltage regulators capable of supplying in excess of −1.5A over an output voltage range of −37V to −1.2V. These regulators are exceptionally easy to apply, requiring only 2 external resistors to set the output voltage and 1 output capacitor for frequency compensation. The circuit design has been optimized for excellent regulation and low thermal transients. Further, the LM137 series features internal current limiting, thermal shutdown and safe-area compensation, making them virtually blowout-proof against overloads.
The LM137 serves a wide variety of applications including local on-card regulation, programmable-output voltage regulation or precision current regulation. The LM137 are ideal complements to the LM117 adjustable positive regulators.
Limited design support from TI available
Existing projects using this product have limited design support from TI. If available, you will find relevant collateral, tools and software on this page. Existing designs using this product have limited design support from TI. Request limited design support in the TI E2E™ support forums.
관심 가지실만한 유사 제품
비교 대상 장치와 유사한 기능
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 날짜 |
|---|---|---|---|---|
| * | Data sheet | LM137JAN 3-Terminal Adjustable Negative Regulators datasheet (Rev. B) | 2013/03/20 | |
| * | SMD | LM137JAN-SP SMD M38510-118B | 2020/08/10 | |
| Selection guide | TI Space Products (Rev. L) | 2026/03/27 | ||
| Application note | Hermetic Package Reflow Profiles, Termination Finishes, and Lead Trim and Form (Rev. A) | PDF | HTML | 2025/11/05 | |
| Application brief | DLA Approved Optimizations for QML Products (Rev. C) | PDF | HTML | 2025/06/17 | |
| Application note | Heavy Ion Orbital Environment Single-Event Effects Estimations (Rev. B) | PDF | HTML | 2025/06/10 | |
| More literature | TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing (Rev. B) | 2025/02/20 | ||
| Application note | Single-Event Effects Confidence Interval Calculations (Rev. A) | PDF | HTML | 2022/10/19 | |
| Application note | DLA Standard Microcircuit Drawings (SMD) and JAN Part Numbers Primer | 2020/08/21 | ||
| E-book | Radiation Handbook for Electronics (Rev. A) | 2019/05/21 | ||
| Application note | Use of an LDO as a Load Switch for Space Applications | 2018/08/01 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| TO-CAN (K) | 2 | Ultra Librarian |
| TO-CAN (NDT) | 3 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.