홈 전력 관리 DC/DC switching regulators DC/DC controllers
홈
전력 관리
DC/DC switching regulators
DC/DC controllers

LM25141

활성

저 Iq, 넓은 입력 범위의 동기 벅 컨트롤러

지금 주문
데이터 시트

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
LM25149 활성 초저 IQ 및 통합된 활성 EMI 필터가 있는 42V 동기식 벅 DC/DC 컨트롤러 Active EMI filtering and DRSS reduces EMI by an average of 25 dBµV.

LM25141

활성
데이터 시트 지금 주문

제품 상세 정보

Rating Catalog Topology Buck Controller Iout (max) (A) 30 Vin (max) (V) 42 Vin (min) (V) 3.8 Vout (max) (V) 15 Vout (min) (V) 1.5 Control mode current mode Features Adjustable current limit, Enable, Frequency synchronization, Light Load Efficiency, Power good, Pre-Bias Start-Up, Spread Spectrum, Synchronous Rectification, UVLO Fixed EMI features Spread Spectrum Duty cycle (max) (%) 96 Iq (typ) (A) 0.000035 Number of phases 1 Operating temperature range (°C) -40 to 125
Rating Catalog Topology Buck Controller Iout (max) (A) 30 Vin (max) (V) 42 Vin (min) (V) 3.8 Vout (max) (V) 15 Vout (min) (V) 1.5 Control mode current mode Features Adjustable current limit, Enable, Frequency synchronization, Light Load Efficiency, Power good, Pre-Bias Start-Up, Spread Spectrum, Synchronous Rectification, UVLO Fixed EMI features Spread Spectrum Duty cycle (max) (%) 96 Iq (typ) (A) 0.000035 Number of phases 1 Operating temperature range (°C) -40 to 125
VQFN (RGE) 24 16 mm² 4 x 4
  • –40°C to +125°C Ambient Operating Temperature Range
  • An AEC-Q100 Qualified Device is Available
  • VIN 3.8 V to 45 V (47 V Absolute Maximum)
  • Output: Fixed 3.3 V, 5 V, or Adjustable From
    1.5 V - 15 V with ±0.8% Accuracy
  • Fixed 2.2 MHz or 440 kHz Switching Frequency with ±5% Accuracy
  • High-Side and Low-Side Gate Drive With Slew Rate Control
  • Optional Frequency Shift by Varying an Analog Voltage or RT Resistor
  • Optional Synchronization to an External Clock
  • Optional Spread Spectrum
  • Shutdown Mode IQ: 10 µA Typical
  • Low Standby Mode IQ: 35 µA Typical
  • 75 mV Current Limit Threshold with ±0.9% Accuracy
  • External Resistor or DCR Current Sensing
  • Output Enable Logic Input
  • Hiccup Mode for Sustained Overload
  • Power Good Indication Output
  • Selectable Diode Emulation or Forced Pulse Width Modulation
  • QFN-24 Package with Wettable Flanks
  • Create a Custom Design Using the LM25141 With the WEBENCH® Power Designer
  • –40°C to +125°C Ambient Operating Temperature Range
  • An AEC-Q100 Qualified Device is Available
  • VIN 3.8 V to 45 V (47 V Absolute Maximum)
  • Output: Fixed 3.3 V, 5 V, or Adjustable From
    1.5 V - 15 V with ±0.8% Accuracy
  • Fixed 2.2 MHz or 440 kHz Switching Frequency with ±5% Accuracy
  • High-Side and Low-Side Gate Drive With Slew Rate Control
  • Optional Frequency Shift by Varying an Analog Voltage or RT Resistor
  • Optional Synchronization to an External Clock
  • Optional Spread Spectrum
  • Shutdown Mode IQ: 10 µA Typical
  • Low Standby Mode IQ: 35 µA Typical
  • 75 mV Current Limit Threshold with ±0.9% Accuracy
  • External Resistor or DCR Current Sensing
  • Output Enable Logic Input
  • Hiccup Mode for Sustained Overload
  • Power Good Indication Output
  • Selectable Diode Emulation or Forced Pulse Width Modulation
  • QFN-24 Package with Wettable Flanks
  • Create a Custom Design Using the LM25141 With the WEBENCH® Power Designer

The LM25141 is a synchronous buck controller, intended for high voltage wide VIN step-down converter applications. The control method is peak current mode control. Current mode control provides inherent line feed-forward, cycle-by-cycle current limiting, and ease of loop compensation. The LM25141 features slew rate control to simplify the compliance with EMI requirements.

The LM25141 has two selectable switching frequencies: 2.2 MHz and 440 kHz. Gate Drivers with slew rate control that can be adjusted to reduce EMI.

In light or no-load conditions, the LM25141 operates in skip cycle mode for improved low power efficiency. The LM25141 has a high voltage bias regulator with automatic switch-over to an external bias to reduce the IQ current from VIN. Additional features include frequency synchronization, cycle-by-cycle current limit, hiccup mode fault protection for sustained overload, and power good output.

The LM25141 is a synchronous buck controller, intended for high voltage wide VIN step-down converter applications. The control method is peak current mode control. Current mode control provides inherent line feed-forward, cycle-by-cycle current limiting, and ease of loop compensation. The LM25141 features slew rate control to simplify the compliance with EMI requirements.

The LM25141 has two selectable switching frequencies: 2.2 MHz and 440 kHz. Gate Drivers with slew rate control that can be adjusted to reduce EMI.

In light or no-load conditions, the LM25141 operates in skip cycle mode for improved low power efficiency. The LM25141 has a high voltage bias regulator with automatic switch-over to an external bias to reduce the IQ current from VIN. Additional features include frequency synchronization, cycle-by-cycle current limit, hiccup mode fault protection for sustained overload, and power good output.

filter 기타 DC/DC controllers 찾기
다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
9개 모두 보기
유형 직함 날짜
* Data sheet LM25141 Wide Input Range Synchronous Buck Controller datasheet PDF | HTML 2017/02/02
Functional safety information LM25141 Functional Safety FIT Rate, Failure Mode Distribution, and Pin FMA PDF | HTML 2022/04/05
E-book An Engineer’s Guide to Low EMI in DC/DC Regulators 2021/04/21
White paper Valuing wide VIN, low EMI synchronous buck circuits for cost-driven, demanding a (Rev. A) 2019/04/10
White paper An overview of radiated EMI specifications for power supplies 2018/06/05
White paper An overview of conducted EMI specifications for power supplies 2018/02/01
Application brief Improve DC/DC Regulator EMI for Free with Optimized Power Stage Layout 2017/11/13
Analog Design Journal Designing the front-end DC/DC conversion stage to withstand automotive transient 2017/01/18
Analog Design Journal Reduce buck-converter EMI and voltage stress by minimizing inductive parasitics 2016/07/21

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

LM5141QRGEVM — LM5141QRG 동기 벅 컨버터 평가 모듈

LM5141QRGEVM 평가 보드는 피크 전류 모드 제어를 사용하는 완전한 기능의 벅 전원 공급 장치를 제공합니다. 이 평가 보드는 5.0V @5A를 제공합니다. 공칭 입력 전압 범위는 8V~18V입니다.
사용 설명서: PDF
TI.com에서 구매 불가
시뮬레이션 모델

LM5141-Q1 and LM25141-Q1 PSpice Transient Model (Rev. A)

SNVMAU4A.ZIP (123 KB) - PSpice Model
다운로드
계산 툴

LM25141DESIGN-CALC — LM25141-Q1 controller quickstart design tool

Welcome to the LM25141-Q1 quickstart calculator design tool. This standalone tool facilitates and assists the power supply engineer with design of a DC/DC buck regulator based on the LM25141-Q1 42-V synchronous buck DC/DC controller with low IQ. As such, the user can expeditiously arrive at an (...)
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
DC/DC controllers
  • LM25141 — 저 Iq, 넓은 입력 범위의 동기 벅 컨트롤러
  • LM25141-Q1 — 주파수 확산 스펙트럼을 지원하는 차량용 2.2MHz, 저 IQ 동기 벅 컨트롤러
하드웨어 개발
평가 보드
  • LM5141QRGEVM — LM5141QRG 동기 벅 컨버터 평가 모듈
다운로드
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
VQFN (RGE) 24 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상