홈 전력 관리 AC/DC 및 DC/DC 컨버터(통합 FET)
홈
전력 관리
AC/DC 및 DC/DC 컨버터(통합 FET)

LM25576-Q1

활성

42V, 3A 스텝다운 스위칭 레귤레이터

지금 주문
데이터 시트

LM25576-Q1

활성
데이터 시트 지금 주문

제품 상세 정보

Rating Automotive Iout (max) (A) 3 Vin (max) (V) 42 Vin (min) (V) 6 Vout (max) (V) 40 Vout (min) (V) 1.23 Features Frequency synchronization, Over Current Protection, Soft Start Adjustable Control mode current mode Switching frequency (min) (kHz) 50 Switching frequency (max) (kHz) 1000 Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 1000 Duty cycle (max) (%) 95 Type Converter
Rating Automotive Iout (max) (A) 3 Vin (max) (V) 42 Vin (min) (V) 6 Vout (max) (V) 40 Vout (min) (V) 1.23 Features Frequency synchronization, Over Current Protection, Soft Start Adjustable Control mode current mode Switching frequency (min) (kHz) 50 Switching frequency (max) (kHz) 1000 Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 1000 Duty cycle (max) (%) 95 Type Converter
HTSSOP (PWP) 20 41.6 mm² 6.5 x 6.4
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature
  • Integrated 42V, 170mΩ N-channel MOSFET
  • Ultra-wide input voltage range from 6V to 42V
  • Adjustable output voltage as low as 1.225V
  • 1.5% feedback reference accuracy
  • Operating frequency adjustable between 50kHz and 1MHz with single resistor
  • Controller or peripheral frequency synchronization
  • Adjustable soft-start
  • Emulated current mode control architecture
  • Wide bandwidth error amplifier
  • Built-in protection
  • HTSSOP-20 EP (exposed pad)
  • Create a custom design using the LM25576-Q1 with the WEBENCH Power Designer
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature
  • Integrated 42V, 170mΩ N-channel MOSFET
  • Ultra-wide input voltage range from 6V to 42V
  • Adjustable output voltage as low as 1.225V
  • 1.5% feedback reference accuracy
  • Operating frequency adjustable between 50kHz and 1MHz with single resistor
  • Controller or peripheral frequency synchronization
  • Adjustable soft-start
  • Emulated current mode control architecture
  • Wide bandwidth error amplifier
  • Built-in protection
  • HTSSOP-20 EP (exposed pad)
  • Create a custom design using the LM25576-Q1 with the WEBENCH Power Designer

The LM25576-Q1 is an easy-to-use buck regulator which allows users to design and optimize a robust power supply using a minimum set of components. Operating with an input voltage range of 6V to 42V, the LM25576-Q1 delivers 3A of continuous output current with an integrated 170mΩ N-Channel MOSFET. The regulator uses an Emulated Current Mode architecture which provides inherent line regulation, tight load transient response, and ease of loop compensation without the usual limitation of low-duty cycles associated with current mode regulators. The operating frequency is adjustable from 50kHz to 1MHz to allow optimization of size and efficiency. To reduce EMI, a frequency synchronization pin allows multiple ICs from the LM(2)557x family to self-synchronize or to synchronize to an external clock. The LM25576-Q1 establishes robustness with a cycle-by-cycle current limit, short-circuit protection, thermal shut-down, and remote shut-down. The device is available in a power enhanced HTSSOP-20 package featuring an exposed die attach pad for thermal dissipation. The LM25576-Q1 is supported by the full suite of WEBENCH On-Line design tools.

The LM25576-Q1 is an easy-to-use buck regulator which allows users to design and optimize a robust power supply using a minimum set of components. Operating with an input voltage range of 6V to 42V, the LM25576-Q1 delivers 3A of continuous output current with an integrated 170mΩ N-Channel MOSFET. The regulator uses an Emulated Current Mode architecture which provides inherent line regulation, tight load transient response, and ease of loop compensation without the usual limitation of low-duty cycles associated with current mode regulators. The operating frequency is adjustable from 50kHz to 1MHz to allow optimization of size and efficiency. To reduce EMI, a frequency synchronization pin allows multiple ICs from the LM(2)557x family to self-synchronize or to synchronize to an external clock. The LM25576-Q1 establishes robustness with a cycle-by-cycle current limit, short-circuit protection, thermal shut-down, and remote shut-down. The device is available in a power enhanced HTSSOP-20 package featuring an exposed die attach pad for thermal dissipation. The LM25576-Q1 is supported by the full suite of WEBENCH On-Line design tools.
filter 기타 AC/DC 및 DC/DC 컨버터(통합 FET) 찾기
다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
LMR33630-Q1 활성 3.8V~36V, 3A 동기 스텝다운 전압 컨버터 Next-generation 3.8-V to 36-V, 3-A synchronous buck converter with ultra-low EMI.

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
21개 모두 보기
유형 직함 날짜
* Data sheet LM25576-Q1 42V, 3A Step-Down Switching Regulator datasheet (Rev. A) PDF | HTML 2025/12/09
Application note Semiconductor and IC Package Thermal Metrics (Rev. D) PDF | HTML 2024/03/25
White paper Overcoming Challenges in Designing Step-Dwn Reg Apps w/40V Input Voltage (Rev. A) 2018/07/03
Application note Low EMI Layout Made SIMPLE With LM43600/1/2/3 and LM46000/1/2 (Rev. A) 2014/09/12
Application note AN-1997 Error Amplifier Limitations in High-Performance Regulator Applications (Rev. A) 2013/05/06
Application note AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C) 2013/04/24
Application note AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C) 2013/04/23
Application note AN-1197 Selecting Inductors for Buck Converters (Rev. B) 2013/04/23
Application note AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C) 2013/04/23
Application note AN-1246 Stresses in Wide Input DC-DC Converters (Rev. C) 2013/04/23
Application note AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B) 2013/04/23
Application note AN-1566 Techniques for Thermal Analysis of Switching Power Supply Designs (Rev. A) 2013/04/23
Application note AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A) 2013/04/23
Application note AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A) 2013/04/23
Application note Quick Start Guide for a 3 Amp Buck Regulator Using the LM5576 and LM25576 (Rev. B) 2013/04/23
User guide LM25576 Reference Design 6-42V input, 5V 3A output User Guide 2012/01/27
More literature LM25576 Reference Design 6-42V input, 5V 3A output Files 2012/01/25
Application note Understanding and Applying Current-Mode Control Theory 2007/08/19
Application note Input and Output Capacitor Selection 2005/09/19
More literature SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations 2005/07/12
Application note AN-643 EMI/RFI Board Design (Rev. B) 2004/05/03

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

시뮬레이션 모델

LM25576 Non-Inverting and Inverting PSpice Transient Model (Rev. A)

SNVM306A.ZIP (123 KB) - PSpice Model
다운로드
시뮬레이션 모델

LM25576 Non-Inverting and Inverting Unencrypted PSpice Transient Model (Rev. A)

SNVM872A.ZIP (4 KB) - PSpice Model
다운로드
시뮬레이션 모델

LM25576 PSpice Average Model

SNVM305.ZIP (57 KB) - PSpice Model
다운로드
시뮬레이션 모델

LM25576 Unencrypted PSpice Average Model

SNVM871.ZIP (2 KB) - PSpice Model
다운로드
CAD/CAE 기호

LM25576 Reference Design 6-42V input, 5V 3A output CAD File

SNVC006.ZIP (647 KB)
다운로드
계산 툴

LM2557X-557XQUICK-CALC — LM(2)557x 빠른 시작 SIMPLE SWITCHER 구성 요소 계산기

다운로드
계산 툴

SIMPLESWITCHER-COMPONENT-CALC — 다운로드 가능한 LM(2)557x 빠른 시작 SIMPLE SWITCHER 구성 요소 계산기

다운로드
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
HTSSOP (PWP) 20 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상