홈 전력 관리 AC/DC 및 DC/DC 컨버터(통합 FET)
홈
전력 관리
AC/DC 및 DC/DC 컨버터(통합 FET)

LM2674

활성

SIMPLE SWITCHER® 40V, 500mA 적은 부품 수의 스텝 다운 레귤레이터

지금 주문
데이터 시트

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
LMR54406 활성 4V~36V, 0.6A, 80µA IQ 동기 벅 SIMPLE SWITCHER® 전력 컨버터 Next-generation converter with lower IQ and improved feature set.
LMZM23600 활성 3.8mm × 3mm 패키지의 36V, 0.5A 스텝다운 DC/DC 전원 모듈 Small solution size module

LM2674

활성
데이터 시트 지금 주문

제품 상세 정보

Rating Catalog Topology Buck Iout (max) (A) 0.5 Vin (max) (V) 40 Vin (min) (V) 6.5 Vout (max) (V) 37 Vout (min) (V) 1.23 Features Enable, Overcurrent protection Control mode Voltage mode Switching frequency (min) (kHz) 260 Switching frequency (max) (kHz) 260 Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 2500 Duty cycle (max) (%) 95 Type Converter
Rating Catalog Topology Buck Iout (max) (A) 0.5 Vin (max) (V) 40 Vin (min) (V) 6.5 Vout (max) (V) 37 Vout (min) (V) 1.23 Features Enable, Overcurrent protection Control mode Voltage mode Switching frequency (min) (kHz) 260 Switching frequency (max) (kHz) 260 Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 2500 Duty cycle (max) (%) 95 Type Converter
PDIP (P) 8 92.5083 mm² 9.81 x 9.43 SOIC (D) 8 29.4 mm² 4.9 x 6 WSON (NHN) 16 25 mm² 5 x 5
  • New product available:
  • For faster time to market:
  • Efficiency up to 96%
  • Available in 8-pin SOIC, PDIP, and 16-pin WSON packages
  • Simple and easy to design with
  • Requires only five external components
  • Uses readily available standard inductors
  • 3V, 5V, 12V, and adjustable output versions
  • 1.21V to 37V adjustable version output voltage range
  • ±1.5% maximum output voltage tolerance over line and load conditions
  • Specified 500mA output load current
  • 0.25Ω DMOS output switch
  • 8V to 40V wide input voltage range
  • 260kHz fixed frequency internal oscillator
  • TTL shutdown capability, low power standby mode
  • Thermal shutdown and current limit protection
  • Create a custom design using the LM2674 with the WEBENCH® Power Designer
  • New product available:
  • For faster time to market:
  • Efficiency up to 96%
  • Available in 8-pin SOIC, PDIP, and 16-pin WSON packages
  • Simple and easy to design with
  • Requires only five external components
  • Uses readily available standard inductors
  • 3V, 5V, 12V, and adjustable output versions
  • 1.21V to 37V adjustable version output voltage range
  • ±1.5% maximum output voltage tolerance over line and load conditions
  • Specified 500mA output load current
  • 0.25Ω DMOS output switch
  • 8V to 40V wide input voltage range
  • 260kHz fixed frequency internal oscillator
  • TTL shutdown capability, low power standby mode
  • Thermal shutdown and current limit protection
  • Create a custom design using the LM2674 with the WEBENCH® Power Designer

The LM2674 series of regulators are monolithic integrated circuits built with a LMDMOS process. These regulators provide all the active functions for a step-down (buck) switching regulator, capable of driving a 500mA load current with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5V, 12V, and an adjustable output version.

Requiring a minimum number of external components, these regulators are simple to use and include patented internal frequency compensation and a fixed frequency oscillator.

The LM2674 series operates at a switching frequency of 260kHz, thus allowing smaller sized filter components than what is required with lower frequency switching regulators. Because of very high efficiency (> 90%), the copper traces on the printed-circuit board are the only heat sinking required.

A family of standard inductors for use with the LM2674 are available from several different manufacturers. This feature greatly simplifies the design of switch-mode power supplies using these advanced ICs. Also included in the data sheet are selector guides for diodes and capacitors designed to work in switch-mode power supplies.

Other features include a specified ±1.5% tolerance on output voltage within specified input voltages and output load conditions, and ±10% on the oscillator frequency. External shutdown is included, featuring typically 50µA standby current. The output switch includes current limiting, as well as thermal shutdown for full protection under fault conditions.

The LM2674 series of regulators are monolithic integrated circuits built with a LMDMOS process. These regulators provide all the active functions for a step-down (buck) switching regulator, capable of driving a 500mA load current with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5V, 12V, and an adjustable output version.

Requiring a minimum number of external components, these regulators are simple to use and include patented internal frequency compensation and a fixed frequency oscillator.

The LM2674 series operates at a switching frequency of 260kHz, thus allowing smaller sized filter components than what is required with lower frequency switching regulators. Because of very high efficiency (> 90%), the copper traces on the printed-circuit board are the only heat sinking required.

A family of standard inductors for use with the LM2674 are available from several different manufacturers. This feature greatly simplifies the design of switch-mode power supplies using these advanced ICs. Also included in the data sheet are selector guides for diodes and capacitors designed to work in switch-mode power supplies.

Other features include a specified ±1.5% tolerance on output voltage within specified input voltages and output load conditions, and ±10% on the oscillator frequency. External shutdown is included, featuring typically 50µA standby current. The output switch includes current limiting, as well as thermal shutdown for full protection under fault conditions.
filter 기타 AC/DC 및 DC/DC 컨버터(통합 FET) 찾기
다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
21개 모두 보기
유형 직함 날짜
* Data sheet LM2674 SIMPLE SWITCHER® Power Converter, High-Efficiency, 500mA, Step-Down Voltage Regulator datasheet (Rev. I) PDF | HTML 2025/06/25
Application note Semiconductor and IC Package Thermal Metrics (Rev. D) PDF | HTML 2024/03/25
Technical article How to increase system reliability and simplify design using DC/DC converters PDF | HTML 2016/06/13
Technical article The importance of accurate switching frequency and current limit when selecting bu PDF | HTML 2016/04/19
Technical article Advantages of leaded packages in robust industrial designs PDF | HTML 2016/03/08
Application note Low EMI Layout Made SIMPLE With LM43600/1/2/3 and LM46000/1/2 (Rev. A) 2014/09/12
Application note AN-1187 Leadless Leadframe Package (LLP) (Rev. R) 2013/05/07
Application note AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C) 2013/04/24
Application note AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C) 2013/04/23
Application note AN-1197 Selecting Inductors for Buck Converters (Rev. B) 2013/04/23
Application note AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C) 2013/04/23
Application note AN-1246 Stresses in Wide Input DC-DC Converters (Rev. C) 2013/04/23
Application note AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B) 2013/04/23
Application note AN-1566 Techniques for Thermal Analysis of Switching Power Supply Designs (Rev. A) 2013/04/23
Application note AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A) 2013/04/23
Application note AN-1Positive-to-Negative Buck-Boost Converter Using LM267x SIMPLE SWITCHER (Rev. E) 2013/04/23
Application note AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A) 2013/04/23
Application note Simple Techniques Minimize Cross-Coupling in Distributed Power Systems 2007/03/21
Application note Input and Output Capacitor Selection 2005/09/19
More literature SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations 2005/07/12
Application note AN-643 EMI/RFI Board Design (Rev. B) 2004/05/03

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

패키지 핀 CAD 기호, 풋프린트 및 3D 모델
PDIP (P) 8 Ultra Librarian
SOIC (D) 8 Ultra Librarian
WSON (NHN) 16 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상