전력 관리 DC/DC 스위칭 레귤레이터 DC/DC 컨버터

LM2675

활성

SIMPLE SWITCHER® 6.5V~40V, 1A 적은 부품 수의 스텝다운 레귤레이터

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
LMR43610 활성 3V-36V, 1A 저 EMI, 저 IQ를 지원하는 동기식 벅 레귤레이터 New converter with low IQ and smaller size
TLVM13620 활성 4mm x 6mm x 1.8mm 패키지에 들어 있는 3.6V~36V 입력, 1V~6V 출력, 2A 스텝다운 모듈 Save board space, simplify design and speed time to market with an integrated-inductor power module.
LMR54410 활성 4V~36V, 1A, 80µA IQ 동기 SIMPLE SWITCHER® 전력 컨버터 Newer converter with better feature set
LMZM23601 활성 36V, 1A 스텝다운 DC-DC 전원 모듈(3.8mm × 3mm 패키지) Small solution size module
TPSM33615 활성 3V~36V 입력, 1V~15V 출력, 1.5A 동기식 벅 전원 모듈 Smaller design with an integrated-inductor power module.

제품 상세 정보

Rating Catalog Topology Buck Iout (max) (A) 1 Vin (max) (V) 40 Vin (min) (V) 6.5 Vout (max) (V) 37 Vout (min) (V) 1.23 Features Enable, Overcurrent protection Control mode Voltage mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.0025 Duty cycle (max) (%) 95
Rating Catalog Topology Buck Iout (max) (A) 1 Vin (max) (V) 40 Vin (min) (V) 6.5 Vout (max) (V) 37 Vout (min) (V) 1.23 Features Enable, Overcurrent protection Control mode Voltage mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.0025 Duty cycle (max) (%) 95
PDIP (P) 8 92.5083 mm² (9.81 mm × 9.43 mm) WSON (NHN) 16 25 mm² (5 mm × 5 mm) SOIC (D) 8 29.4 mm² (4.9 mm × 6 mm)
  • Efficiency up to 96%
  • Available in 8-pin SOIC, PDIP, and 16-pin WSON package
  • Requires only 5 external components
  • 3.3V, 5V, 12V, and adjustable output versions
  • 1.21V to 37V adjustable version output voltage range
  • ±1.5% maximum output voltage tolerance over line and load conditions
  • Specified 1A output load current
  • 8V to 40V wide input voltage range
  • 260kHz fixed frequency internal oscillator
  • TTL shutdown capability, low-power standby mode
  • Thermal shutdown and current limit protection
  • Create a custom design using the LM2675 with the WEBENCH® Power Designer
  • Efficiency up to 96%
  • Available in 8-pin SOIC, PDIP, and 16-pin WSON package
  • Requires only 5 external components
  • 3.3V, 5V, 12V, and adjustable output versions
  • 1.21V to 37V adjustable version output voltage range
  • ±1.5% maximum output voltage tolerance over line and load conditions
  • Specified 1A output load current
  • 8V to 40V wide input voltage range
  • 260kHz fixed frequency internal oscillator
  • TTL shutdown capability, low-power standby mode
  • Thermal shutdown and current limit protection
  • Create a custom design using the LM2675 with the WEBENCH® Power Designer

The LM2675 series of regulators are monolithic integrated DC-DC converter circuits built with a LMDMOS process. These regulators provide all the active functions for a step-down (buck) switching regulator, capable of driving a 1A load current with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5V, 12V, and an adjustable output version.

Requiring a minimum number of external components, these regulators are simple to use and include patented internal frequency compensation and a fixed frequency oscillator.

The LM2675 series operates at a switching frequency of 260kHz, thus allowing smaller-sized filter components than what is needed with lower frequency switching regulators. Because of the very high efficiency (> 90%), the copper traces on the printed-circuit board are the only heat sinking needed.

A family of standard inductors for use with the LM2675 are available from several different manufacturers. This feature greatly simplifies the design of switch-mode power supplies using these advanced ICs. Also included in the data sheet are selector guides for diodes and capacitors designed to work in switch-mode power supplies.

Other features include ±1.5%-tolerance on output voltage within specified input voltages and output load conditions, and ±10% on the oscillator frequency. External shutdown is included, featuring typically 50µA stand-by current. The output switch includes current limiting, as well as thermal shutdown for full protection under fault conditions.

The LM2675 series of regulators are monolithic integrated DC-DC converter circuits built with a LMDMOS process. These regulators provide all the active functions for a step-down (buck) switching regulator, capable of driving a 1A load current with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5V, 12V, and an adjustable output version.

Requiring a minimum number of external components, these regulators are simple to use and include patented internal frequency compensation and a fixed frequency oscillator.

The LM2675 series operates at a switching frequency of 260kHz, thus allowing smaller-sized filter components than what is needed with lower frequency switching regulators. Because of the very high efficiency (> 90%), the copper traces on the printed-circuit board are the only heat sinking needed.

A family of standard inductors for use with the LM2675 are available from several different manufacturers. This feature greatly simplifies the design of switch-mode power supplies using these advanced ICs. Also included in the data sheet are selector guides for diodes and capacitors designed to work in switch-mode power supplies.

Other features include ±1.5%-tolerance on output voltage within specified input voltages and output load conditions, and ±10% on the oscillator frequency. External shutdown is included, featuring typically 50µA stand-by current. The output switch includes current limiting, as well as thermal shutdown for full protection under fault conditions.

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
22개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 LM2675 SIMPLE SWITCHER® Power Converter, High-Efficiency, 1A, Step-Down Voltage Regulator datasheet (Rev. G) PDF | HTML 2025. 6. 25
애플리케이션 노트 Semiconductor and IC Package Thermal Metrics (Rev. D) PDF | HTML 2024. 3. 25
기술 문서 How to increase system reliability and simplify design using DC/DC converters PDF | HTML 2016. 6. 13
기술 문서 The importance of accurate switching frequency and current limit when selecting bu PDF | HTML 2016. 4. 19
기술 문서 Advantages of leaded packages in robust industrial designs PDF | HTML 2016. 3. 8
애플리케이션 노트 Low EMI Layout Made SIMPLE With LM43600/1/2/3 and LM46000/1/2 (Rev. A) 2014. 9. 12
애플리케이션 노트 AN-1187 Leadless Leadframe Package (LLP) (Rev. R) 2013. 5. 7
EVM User's guide LM2675 5.0EVAL 1A Step-Down High-Efficiency SIMPLE SWITCHER Eval Brd (Rev. C) 2013. 4. 24
애플리케이션 노트 AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C) 2013. 4. 24
애플리케이션 노트 AN-1566 Techniques for Thermal Analysis of Switching Power Supply Designs (Rev. A) 2013. 4. 23
애플리케이션 노트 AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A) 2013. 4. 23
애플리케이션 노트 AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C) 2013. 4. 23
애플리케이션 노트 AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C) 2013. 4. 23
애플리케이션 노트 AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A) 2013. 4. 23
애플리케이션 노트 AN-1Positive-to-Negative Buck-Boost Converter Using LM267x SIMPLE SWITCHER (Rev. E) 2013. 4. 23
애플리케이션 노트 AN-1197 Selecting Inductors for Buck Converters (Rev. B) 2013. 4. 23
애플리케이션 노트 AN-1246 Stresses in Wide Input DC-DC Converters (Rev. C) 2013. 4. 23
애플리케이션 노트 AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B) 2013. 4. 23
애플리케이션 노트 Simple Techniques Minimize Cross-Coupling in Distributed Power Systems 2007. 3. 21
애플리케이션 노트 Input and Output Capacitor Selection 2005. 9. 19
추가 자료 SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations 2005. 7. 12
애플리케이션 노트 AN-643 EMI/RFI Board Design (Rev. B) 2004. 5. 3

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

LM2675-5.0EVAL — SIMPLE SWITCHER 전원 컨버터 고효율 1A 스텝다운 레귤레이터 평가 모듈

Amp Step-Down High-Efficency SIMPLE SWITCHER Evaluation Board.

The LM2675 SIMPLE SWITCHER step-down regulator provides all the active functions for a step-down regulator capable of driving a 1A load. Switching frequency is internally set to 260 kHz, allowing smaller-sized filter components than (...)

사용 설명서: PDF
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
시뮬레이션 모델

LM2675-ADJ PSpice Transient Model

SNVM533.ZIP (226 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

LM2675-ADJ TINA-TI Load Transient Reference Design

SNVMAT3.TSC (776 KB) - TINA-TI 레퍼런스 설계
지원되는 제품 및 하드웨어
시뮬레이션 모델

LM2675-ADJ TINA-TI Startup Reference Design

SNVMAT4.TSC (782 KB) - TINA-TI 레퍼런스 설계
지원되는 제품 및 하드웨어
시뮬레이션 모델

LM2675-ADJ TINA-TI Transient Spice Model

SNVMAT5.ZIP (57 KB) - Tina-TI Spice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

LM2675-ADJ Unencrypted PSpice Transient Model

SNVM876.ZIP (2 KB) - PSpice 모델
지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
PDIP (P) 8 Ultra Librarian
WSON (NHN) 16 Ultra Librarian
SOIC (D) 8 Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상