홈 전원 관리 AC/DC & DC/DC converters (integrated FET)
홈
전원 관리
AC/DC & DC/DC converters (integrated FET)

LM46000

활성

3.5~60V, 500mA 동기 스텝다운 전압 컨버터

지금 주문
데이터시트

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
LMR36506 활성 4μA IQ의 3V~65V, 0.6A 초소형 동기 벅 컨버터 Smaller footprint, lower IQ and lower EMI.
TPSM365R6 활성 3V~65V 입력, 1V~13V 출력, 0.6A 동기식 벅 컨버터 전원 모듈 Smaller design with an integrated-inductor power module.

LM46000

활성
데이터시트 지금 주문

제품 상세 정보

Iout (max) (A) 0.5 Vin (min) (V) 3.5 Vin (max) (V) 60 Topology Buck Type Converter Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200 Features Enable, Frequency synchronization, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up, Synchronous Rectification, Tracking Control mode current mode Vout (min) (V) 1 Vout (max) (V) 28 Rating Catalog Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000024
Iout (max) (A) 0.5 Vin (min) (V) 3.5 Vin (max) (V) 60 Topology Buck Type Converter Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200 Features Enable, Frequency synchronization, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up, Synchronous Rectification, Tracking Control mode current mode Vout (min) (V) 1 Vout (max) (V) 28 Rating Catalog Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000024
HTSSOP (PWP) 16 32 mm² 5 x 6.4
  • 24-µA Quiescent Current in Regulation
  • High Efficiency at Light Load (DCM and PFM)
  • Meets EN55022/CISPR 22 EMI standards
  • Integrated Synchronous Rectification
  • Adjustable Frequency Range: 200 kHz to 2.2 MHz (500 kHz default)
  • Frequency Synchronization to External Clock
  • Internal Compensation
  • Stable With Almost Any Combination of Ceramic, Polymer, Tantalum, and Aluminum Capacitors
  • Power-Good Flag
  • Soft-Start into Prebiased Load
  • Internal Soft Start: 4.1 ms
  • Extendable Soft-Start Time by External Capacitor
  • Output Voltage Tracking Capability
  • Precision Enable to Program System UVLO
  • Output Short-Circuit Protection With Hiccup Mode
  • Overtemperature Thermal Shutdown Protection
  • Create a Custom Design Using the LM46000 With the WEBENCH® Power Designer
  • 24-µA Quiescent Current in Regulation
  • High Efficiency at Light Load (DCM and PFM)
  • Meets EN55022/CISPR 22 EMI standards
  • Integrated Synchronous Rectification
  • Adjustable Frequency Range: 200 kHz to 2.2 MHz (500 kHz default)
  • Frequency Synchronization to External Clock
  • Internal Compensation
  • Stable With Almost Any Combination of Ceramic, Polymer, Tantalum, and Aluminum Capacitors
  • Power-Good Flag
  • Soft-Start into Prebiased Load
  • Internal Soft Start: 4.1 ms
  • Extendable Soft-Start Time by External Capacitor
  • Output Voltage Tracking Capability
  • Precision Enable to Program System UVLO
  • Output Short-Circuit Protection With Hiccup Mode
  • Overtemperature Thermal Shutdown Protection
  • Create a Custom Design Using the LM46000 With the WEBENCH® Power Designer

The LM46000 regulator is an easy-to-use synchronous step-down DC-DC converter capable of driving up to 500 mA of load current from an input voltage range of 3.5 V to 60 V. The LM46000 provides exceptional efficiency, output accuracy and dropout voltage in a very small solution size. An extended family is available in 1 A and 2 A load current options in pin-to-pin compatible packages. Peak current mode control is employed to achieve simple control loop compensation and cycle-by-cycle current limiting. Optional features such as programmable switching frequency, synchronization, power-good flag, precision enable, internal soft start, extendable soft start, and tracking provide a flexible and easy-to-use platform for a wide range of applications. Discontinuous conduction and automatic frequency modulation at light loads improve light load efficiency. The family requires few external components and pin arrangement allows simple, optimum PCB layout. Protection features include thermal shutdown, VCC undervoltage lockout, cycle-by-cycle current limit, and output short-circuit protection. The LM46000 device is available in the 16-pin leaded HTSSOP (PWP) package (6.6 mm × 5.1 mm × 1.2 mm) with 0.65-mm lead pitch. Pin-to-pin compatible with LM46001, LM46002, LM43603, LM43602, LM43601, and LM43600.

The LM46000 regulator is an easy-to-use synchronous step-down DC-DC converter capable of driving up to 500 mA of load current from an input voltage range of 3.5 V to 60 V. The LM46000 provides exceptional efficiency, output accuracy and dropout voltage in a very small solution size. An extended family is available in 1 A and 2 A load current options in pin-to-pin compatible packages. Peak current mode control is employed to achieve simple control loop compensation and cycle-by-cycle current limiting. Optional features such as programmable switching frequency, synchronization, power-good flag, precision enable, internal soft start, extendable soft start, and tracking provide a flexible and easy-to-use platform for a wide range of applications. Discontinuous conduction and automatic frequency modulation at light loads improve light load efficiency. The family requires few external components and pin arrangement allows simple, optimum PCB layout. Protection features include thermal shutdown, VCC undervoltage lockout, cycle-by-cycle current limit, and output short-circuit protection. The LM46000 device is available in the 16-pin leaded HTSSOP (PWP) package (6.6 mm × 5.1 mm × 1.2 mm) with 0.65-mm lead pitch. Pin-to-pin compatible with LM46001, LM46002, LM43603, LM43602, LM43601, and LM43600.
open-in-new 기타 AC/DC & DC/DC converters (integrated FET) 찾기
다운로드 스크립트와 함께 비디오 보기 동영상

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기29
유형 직함 날짜
* Data sheet LM46000 3.5-V to 60-V, 0.5-A Synchronous Step-Down Voltage Converter datasheet (Rev. B) PDF | HTML 2018/03/22
Application note Semiconductor and IC Package Thermal Metrics (Rev. D) PDF | HTML 2024/03/25
Application note Understanding Inverting Buck-Boost Power Stages in Switch Mode Power Supplies (Rev. B) 2019/03/12
Application note Differences Between LM4600x/LM4360x A and Non-A OPNs 2018/03/27
White paper Synchronous Rectification in High-Performance Power Converter Design (Rev. A) 2016/09/15
More literature SIMPLE SWITCHER Synchronous Regulator Series (Rev. B) 2016/02/08
Application note Cap Drop Offline Supply for E-Meters 2015/06/16
Application note Cost-Effective Transformerless Offline Supply for Light Load Applications (Rev. A) 2015/06/16
Technical article Inverting made simple by unleashing the buck PDF | HTML 2015/05/19
Application note Inverting Applications Made SIMPLE With LM4600x and LM4360x (Rev. B) 2015/02/20
Application note Thermal Design Made Simple With LM43603 and LM46002 2014/09/15
Application note Low EMI Layout Made SIMPLE With LM43600/1/2/3 and LM46000/1/2 (Rev. A) 2014/09/12
Application note Compensation Made SIMPLE With LM4360x, LM4600x 2014/07/29
EVM User's guide LM46000EVM User Guide 2014/04/16
Application note AN-1533 Overvoltage Protection Circuit for Automotive Load Dump (Rev. B) 2013/05/06
Application note AN-1997 Error Amplifier Limitations in High-Performance Regulator Applications (Rev. A) 2013/05/06
Application note AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C) 2013/04/24
Application note AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C) 2013/04/23
Application note AN-1197 Selecting Inductors for Buck Converters (Rev. B) 2013/04/23
Application note AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C) 2013/04/23
Application note AN-1246 Stresses in Wide Input DC-DC Converters (Rev. C) 2013/04/23
Application note AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B) 2013/04/23
Application note AN-1566 Techniques for Thermal Analysis of Switching Power Supply Designs (Rev. A) 2013/04/23
Application note AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A) 2013/04/23
Application note AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A) 2013/04/23
Application note Understanding and Applying Current-Mode Control Theory 2007/08/19
Application note Input and Output Capacitor Selection 2005/09/19
More literature SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations 2005/07/12
Application note AN-643 EMI/RFI Board Design (Rev. B) 2004/05/03

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

LM46000PWPEVM — LM46000PWP 동기 스텝다운 컨버터 평가 모듈

The LM46000PWPEVM evaluation module (EVM) is a fully assembled and tested circuit for evaluating the LM46000PWP synchronous step-down converter. The EVM operates from a 3.5V to 60V input and provides a 3.3V output at 0.5A.

사용 설명서: PDF
TI.com에서 구매할 수 없습니다
시뮬레이션 모델

LM46000 Non-Inverting and Inverting PSpice Transient Model (Rev. A)

SLIM317A.ZIP (154 KB) - PSpice Model
다운로드
시뮬레이션 모델

LM46000 PSpice Average Model

SLIM318.ZIP (76 KB) - PSpice Model
다운로드
시뮬레이션 모델

LM46000 Unencrypted Non-Inverting and Inverting PSpice Transient Model (Rev. A)

SNVM728A.ZIP (8 KB) - PSpice Model
다운로드
시뮬레이션 모델

LM46000 Unencrypted PSpice Average Model

SNVM727.ZIP (1 KB) - PSpice Model
다운로드
패키지 핀 다운로드
HTSSOP (PWP) 16 옵션 보기
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상