이 제품의 최신 버전이 있습니다
LM5007
- Versatile Synchronous Buck DC/DC
Converter
- Operating Input Voltage Range of 9 V to 75 V
- Integrated 80-V, 0.7-A N-Channel Buck Switch
- Internal High-Voltage VCC Regulator
- Adjustable Output Voltage
- High Efficiency Operation
- Adaptive Constant On-Time Control
Architecture
- Ultra-Fast Transient Response
- No Control Loop Compensation Required
- Nearly Constant Switching Frequency
- PWM On-Time Varies Inversely with Input Voltage
- Precision 2.5-V Reference
- Low Input Quiescent Current
- Inherent Protection
Features for Robust Design
- Intelligent Current Limit Protection
- VCC and Gate Drive UVLO Protection
- Thermal Shutdown Protection With Hysteresis
- External Shutdown Control
- 8-Pin VSSOP and WSON Packages
- Create a Custom Regulator Design Using WEBENCH® Power Designer
The LM5007 0.5-A step-down switching converter features all of the functions needed to implement a low-cost and efficient buck regulator. This high-voltage converter has an integrated 80-V, 0.7-A N-channel buck switch and operates over an input voltage range of 9 V to 75 V. The device is easy to implement and is provided in 8-pin VSSOP and thermally enhanced 8-pin WSON packages.
The converter uses a hysteretic control scheme with a PWM on-time inversely proportional to VIN. This feature allows the operating frequency to remain relatively constant with load and input voltage variations. The hysteretic control requires no loop compensation and provides fast transient response. An intelligent current limit is implemented with forced off-time that is inversely proportional to VOUT. This current limiting scheme ensures short-circuit protection while providing reduced load current foldback. Other protection features include thermal shutdown with automatic recovery, VCC and gate drive undervoltage lockout, and maximum duty cycle limiter.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | LM5007 75-V, 0.5-A DC/DC Buck Converter With 80-V Integrated Power MOSFET datasheet (Rev. H) | PDF | HTML | 2018. 11. 6 | |
| 애플리케이션 노트 | Stability Analysis and Design of COT Type-3 Ripple Circuit | 2019. 3. 20 | |||
| 기술 문서 | Simplifying 100V wide VIN power conversion | PDF | HTML | 2016. 11. 11 | ||
| 백서 | Wide VIN power management ICs simplify white paper (Rev. A) | 2013. 9. 19 | |||
| 애플리케이션 노트 | Analysis & Design of Hysteretic Constant Freq Buck Regr Using the LM5007 (Rev. B) | 2013. 4. 30 | |||
| 애플리케이션 노트 | Controlling Output Ripple & Achiev ESR Indep Constant On-Time Reg Designs (Rev. A) | 2013. 4. 23 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LM5007EVAL — 80V 넓은 Vin 스텝다운 스위칭 레귤레이터 평가 보드
LM5007 High Voltage (80 V) Step Down Switching Regulator
PMP23320 — 500W 인터리브 SEPIC 레퍼런스 설계
이 500W 인터리브 SEPIC 컨버터 레퍼런스 설계는 최대 출력 전류가 5A인 비절연 조정 가능한 5V~110V 출력 전압을 공급합니다. 주 전력계는 LM5122 컨트롤러 2개를 사용하여 SEPIC의 1차 및 2차 위상에 전원을 공급합니다. LM5007 벅 컨버터는 로컬 10V 바이어스를 생성하는 데 사용됩니다.
TIDA-00290 — PoE PSE 타입 2(30W) IEEE 802.3at 완전 자동 쿼드 포트 솔루션.
This reference design is fully autonomous IEEE802.3at, Type-2 (30 W) Power-over-Ethernet (PoE) 4-port power sourcing equipment (PSE). An additional configuration of two non-standard, high-power ports (<60 W) is provided. Both configurations support gigabit Ethernet data pass through in (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VSSOP (DGK) | 8 | Ultra Librarian |
| WSON (NGT) | 8 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.