전원 관리 DC/DC 전력 모듈 벅 모듈(통합 인덕터)

LMZM33602

활성

컴팩트 7x9x4mm QFN 패키지의 4V~36V, 2A 스텝다운 DC/DC 전원 모듈

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TPSM63602 활성 4mm x 6mm x 1.8mm 패키지에 들어 있는 3V~36V 입력, 1V~16V 출력, 2A 스텝다운 모듈 Significantly smaller footprint, lower EMI, higher efficiency, and optional spread spectrum.
TPSM63603 활성 고밀도, 3V~36V 입력, 1V~16V 출력, 3A 전원 모듈 Smaller footprint, lower EMI, higher efficiency, and optional spread spectrum.

제품 상세 정보

Rating Catalog Operating temperature range (°C) -40 to 105 Topology Buck, Inverting Buck-Boost, Synchronous Buck Type Module Iout (max) (A) 2 Vin (min) (V) 4 Vin (max) (V) 36 Vout (min) (V) 1 Vout (max) (V) 18 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 1200 Features EMI Tested, Enable, Frequency synchronization, Power good Duty cycle (max) (%) 90
Rating Catalog Operating temperature range (°C) -40 to 105 Topology Buck, Inverting Buck-Boost, Synchronous Buck Type Module Iout (max) (A) 2 Vin (min) (V) 4 Vin (max) (V) 36 Vout (min) (V) 1 Vout (max) (V) 18 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 1200 Features EMI Tested, Enable, Frequency synchronization, Power good Duty cycle (max) (%) 90
B3QFN (RLR) 18 63 mm² 9 x 7
  • Complete integrated power solution
    • As few as four external components
    • Minimum solution size < 100 mm2
  • 9-mm × 7-mm × 4-mm QFN package
    • All pins accessible from package perimeter
    • Pin compatible with 3-A LMZM33603
  • Input voltage range: 4 V to 36 V
  • Output voltage range: 1 V to 18 V
  • Efficiencies up to 95%
  • Adjustable switching frequency (200 kHz to 1.2 MHz)
  • Allows synchronization to an external clock
  • Power-good output
  • Meets EN55011 class B radiated EMI standards
  • Operating IC junction range: –40°C to +125°C
  • Operating ambient range: –40°C to +105°C
  • Create a custom design using the LMZM33602 with the WEBENCH Power Designer
  • Complete integrated power solution
    • As few as four external components
    • Minimum solution size < 100 mm2
  • 9-mm × 7-mm × 4-mm QFN package
    • All pins accessible from package perimeter
    • Pin compatible with 3-A LMZM33603
  • Input voltage range: 4 V to 36 V
  • Output voltage range: 1 V to 18 V
  • Efficiencies up to 95%
  • Adjustable switching frequency (200 kHz to 1.2 MHz)
  • Allows synchronization to an external clock
  • Power-good output
  • Meets EN55011 class B radiated EMI standards
  • Operating IC junction range: –40°C to +125°C
  • Operating ambient range: –40°C to +105°C
  • Create a custom design using the LMZM33602 with the WEBENCH Power Designer

The LMZM33602 power module is an easy-to-use integrated power solution that combines a 2-A, step-down, DC/DC converter with power MOSFETs, a shielded inductor, and passives into a low-profile package. This power solution requires as few as four external components and eliminates the loop compensation and magnetics part selection from the design process.

The 9-mm × 7-mm × 4-mm, 18-pin QFN package is easy to solder onto a printed circuit board and allows a compact, low-profile, point-of-load design. The full feature set, including power good, programmable UVLO, prebias start-up, overcurrent and overtemperature protections, make the LMZM33602 an excellent device for powering a wide range of applications.

The LMZM33602 power module is an easy-to-use integrated power solution that combines a 2-A, step-down, DC/DC converter with power MOSFETs, a shielded inductor, and passives into a low-profile package. This power solution requires as few as four external components and eliminates the loop compensation and magnetics part selection from the design process.

The 9-mm × 7-mm × 4-mm, 18-pin QFN package is easy to solder onto a printed circuit board and allows a compact, low-profile, point-of-load design. The full feature set, including power good, programmable UVLO, prebias start-up, overcurrent and overtemperature protections, make the LMZM33602 an excellent device for powering a wide range of applications.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
10개 모두 보기
유형 직함 날짜
* Data sheet LMZM33602 4-V to 36-V Input, 2-A Power Module in QFN Package datasheet (Rev. D) PDF | HTML 2020/08/11
Application note Soldering Considerations for Power Modules (Rev. C) PDF | HTML 2024/03/14
Application note Step-Dwn (Buck) Convrtr Pwer Solutions for Programmable Logic Controller Systems (Rev. A) PDF | HTML 2021/07/26
Application note Practical Thermal Design With DC/DC Power Modules (Rev. A) 2019/11/20
Technical article Advantages of using nonisolated DC/DC power buck modules in DAQ applications PDF | HTML 2019/01/15
Technical article Enhancing DAQ performance for grid protection, control and monitoring equipment us PDF | HTML 2018/12/11
Application note Inverting Application for the LMZM33603 (Rev. B) 2018/10/19
White paper Power modules for lab instrumentation 2018/10/18
White paper Simplify low EMI design with power modules 2017/11/20
EVM User's guide Using the LMZM33603 and LMZM33602 EVM 2017/08/11

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

LMZM33602EVM — LMZM33602, 4V~36V 입력, 1V~18V 출력, 2.0A 전원 모듈 EVM

The LMZM33602 evaluation board is configured to evaluate the operation of the LMZM33602 power module for current up to 2.0 A. The input voltage range is 4V to 36V. The output voltage range is 1V to 18V. The evaluation board makes it easy to evaluate the LMZM33602 operation.
사용 설명서: PDF
TI.com에서 구매 불가
시뮬레이션 모델

LMZM33602 Non-inverting and Inverting PSpice Transient Model

SNVMBF7.ZIP (225 KB) - PSpice Model
시뮬레이션 모델

LMZM33602 Unencrypted Non-Inverting and Inverting PSpice Transient Model

SNVMBF8.ZIP (7 KB) - PSpice Model
레퍼런스 디자인

TIDA-010011 — 보호 릴레이 프로세서 모듈을 위한 고효율 전원 공급 장치 아키텍처 레퍼런스 설계

This reference design showcases various power architectures for generating multiple voltage rails for an application processor module, requiring >1A load current and high efficiency . The required power supply is generated using 5-, 12- or 24-V DC input from the backplane. Power supplies are (...)
Design guide: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
B3QFN (RLR) 18 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상