LP8754

활성

다중 위상 6 코어 스텝다운 컨버터

제품 상세 정보

Regulated outputs (#) 6 Configurability Factory programmable, Software configurable Vin (min) (V) 2.5 Vin (max) (V) 5 Vout (min) (V) 0.6 Vout (max) (V) 1.67 Iout (max) (A) 10 Features Adjustable current limit, Dynamic voltage scaling, I2C, Light-load efficiency, Multiple outputs, Phase interleaving, Power good, Remote sense, Synchronous rectification Step-up DC/DC converter 0 Step-down DC/DC converter 6 Step-down DC/DC controller 0 Step-up DC/DC controller 0 LDO 0 Iq (typ) (mA) 0.08 Rating Catalog Switching frequency (max) (kHz) 4000 Operating temperature range (°C) -40 to 85 Shutdown current (ISD) (typ) (µA) 0.1 Switching frequency (typ) (kHz) 3000
Regulated outputs (#) 6 Configurability Factory programmable, Software configurable Vin (min) (V) 2.5 Vin (max) (V) 5 Vout (min) (V) 0.6 Vout (max) (V) 1.67 Iout (max) (A) 10 Features Adjustable current limit, Dynamic voltage scaling, I2C, Light-load efficiency, Multiple outputs, Phase interleaving, Power good, Remote sense, Synchronous rectification Step-up DC/DC converter 0 Step-down DC/DC converter 6 Step-down DC/DC controller 0 Step-up DC/DC controller 0 LDO 0 Iq (typ) (mA) 0.08 Rating Catalog Switching frequency (max) (kHz) 4000 Operating temperature range (°C) -40 to 85 Shutdown current (ISD) (typ) (µA) 0.1 Switching frequency (typ) (kHz) 3000
DSBGA (YFQ) 49 9 mm² 3 x 3
  • Six High-Efficiency Step-Down DC/DC Converter Cores:
    • Max Output Current 10 A
    • Cores Bundled to a 6-Phase Converter
    • Load Current Reporting
    • Programmable Overcurrent Protection (OCP)
    • Auto PWM/PFM and Forced-PWM Operations and
      Automatic Low Power-Mode Setting
    • Automatic Phase Adding/Shedding
    • Remote Differential Feedback Voltage Sensing
    • Output Voltage Ramp Control
    • VOUT Range = 0.6 V to 1.67 V
  • I2C-Compatible Interface which Supports
    Standard (100 kHz), Fast (400 kHz), and High-Speed
    (3.4 MHz) Modes
  • Four Selectable I2C Addresses
  • Interrupt Function with Programmable Masking
  • Output Short-Circuit and Input Overvoltage
    Protection (OVP)
  • Spread Spectrum and Phase Control for EMI
    Reduction
  • Overtemperature Protection (OTP)
  • Undervoltage Lock-out (UVLO)
  • Six High-Efficiency Step-Down DC/DC Converter Cores:
    • Max Output Current 10 A
    • Cores Bundled to a 6-Phase Converter
    • Load Current Reporting
    • Programmable Overcurrent Protection (OCP)
    • Auto PWM/PFM and Forced-PWM Operations and
      Automatic Low Power-Mode Setting
    • Automatic Phase Adding/Shedding
    • Remote Differential Feedback Voltage Sensing
    • Output Voltage Ramp Control
    • VOUT Range = 0.6 V to 1.67 V
  • I2C-Compatible Interface which Supports
    Standard (100 kHz), Fast (400 kHz), and High-Speed
    (3.4 MHz) Modes
  • Four Selectable I2C Addresses
  • Interrupt Function with Programmable Masking
  • Output Short-Circuit and Input Overvoltage
    Protection (OVP)
  • Spread Spectrum and Phase Control for EMI
    Reduction
  • Overtemperature Protection (OTP)
  • Undervoltage Lock-out (UVLO)

The LP8754 is designed to meet the power management requirements of the latest applications processors in mobile phones and similar portable applications. The device contains six step-down DC/DC converter cores, which are bundled together in a 6-phase buck converter. The device is fully controlled by a Dynamic Voltage Scaling (DVS) interface or an I2C-compatible serial interface.

The automatic PWM/PFM operation together with the automatic phase adding/shedding maximizes efficiency over a wide output current range. The LP8754 supports remote differential voltage sensing to compensate IR drop between the regulator output and the point-of-load thus improving the accuracy of the output voltage.

The protection features include short-circuit protection, current limits, input OVP, UVLO, temperature warning, and shutdown functions. Several error flags are provided for status information of the IC. In addition, I2C read-back includes total load current and load current for each buck core: The LP8754 has the ability to sense current being delivered to the load without the addition of current sense resistors. During start-up, the device controls the output voltage slew rate to minimize overshoot and the inrush current.

For all available packages, see the orderable addendum at the end of the datasheet.

The LP8754 is designed to meet the power management requirements of the latest applications processors in mobile phones and similar portable applications. The device contains six step-down DC/DC converter cores, which are bundled together in a 6-phase buck converter. The device is fully controlled by a Dynamic Voltage Scaling (DVS) interface or an I2C-compatible serial interface.

The automatic PWM/PFM operation together with the automatic phase adding/shedding maximizes efficiency over a wide output current range. The LP8754 supports remote differential voltage sensing to compensate IR drop between the regulator output and the point-of-load thus improving the accuracy of the output voltage.

The protection features include short-circuit protection, current limits, input OVP, UVLO, temperature warning, and shutdown functions. Several error flags are provided for status information of the IC. In addition, I2C read-back includes total load current and load current for each buck core: The LP8754 has the ability to sense current being delivered to the load without the addition of current sense resistors. During start-up, the device controls the output voltage slew rate to minimize overshoot and the inrush current.

For all available packages, see the orderable addendum at the end of the datasheet.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
4개 모두 보기
유형 직함 날짜
* Data sheet LP8754 Multi-Phase Six-Core Step-Down Converter datasheet (Rev. A) PDF | HTML 2014/08/19
Technical article Thinking beyond the buck controller for high-output power supplies PDF | HTML 2016/05/27
Technical article Multiphase DC/DC converters provide low ripple, integrated solution for FPGA power PDF | HTML 2015/07/09
EVM User's guide LP8754EVM User's Guide (6-Phase) 2014/08/19

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 모듈(EVM)용 GUI

SNVC158 LP8754 Evaluation Software

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
멀티 채널 IC(PMIC)
LP8754 다중 위상 6 코어 스텝다운 컨버터
패키지 CAD 기호, 풋프린트 및 3D 모델
DSBGA (YFQ) 49 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상