SN65HVD72
- Small-size VSSOP Packages Save Board Space, or SOIC for Drop-in Compatibility
- Bus I/O Protection
- >±15 kV HBM Protection
- >±12 kV IEC 61000-4-2 Contact Discharge
- >±4 kV IEC 61000-4-4 Fast Transient Burst
- Extended Industrial Temperature Range
–40°C to 125°C - Large Receiver Hysteresis (80 mV) for Noise Rejection
- Low Unit-Loading Allows Over 200 Connected Nodes
- Low Power Consumption
- Low Standby Supply Current: < 2 µA
- ICC < 1 mA Quiescent During Operation
- 5-V Tolerant Logic Inputs Compatible With
3.3-V or 5-V Controllers - Signaling Rate Options Optimized for:
250 kbps, 20 Mbps, 50 Mbps - Glitch Free Power-Up and Power-Down Bus Inputs and Outputs
These devices have robust 3.3-V drivers and receivers in a small package for demanding industrial applications. The bus pins are robust to ESD events with high levels of protection to Human-Body Model and IEC Contact Discharge specifications.
Each of these devices combines a differential driver and a differential receiver which operate from a single 3.3-V power supply. The driver differential outputs and the receiver differential inputs are connected internally to form a bus port suitable for half-duplex (two-wire bus) communication. These devices feature a wide common-mode voltage range making the devices suitable for multi-point applications over long cable runs. These devices are characterized from –40°C to 125°C.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | SN65HVD7x 3.3-V Supply RS-485 With IEC ESD protection datasheet (Rev. H) | PDF | HTML | 2019. 3. 11 | |
| 기술 문서 | Get Connected: How to operate your RS-485 links without termination | PDF | HTML | 2016. 5. 19 | ||
| 기술 문서 | RS-485 basics: the RS-485 receiver | PDF | HTML | 2016. 2. 9 | ||
| 기술 문서 | RS-485 basics: The RS-485 Driver | PDF | HTML | 2015. 6. 16 | ||
| 아날로그 디자인 학술지 | 2Q 2013 Issue Analog Applications Journal | 2013. 4. 16 | |||
| 아날로그 디자인 학술지 | RS-485 failsafe biasing: Old versus new transceivers | 2013. 4. 16 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
RS485-FL-DPLX-EVM — RS-485 풀 듀플렉스 평가 모듈
The RS-485 full-duplex evaluation module (EVM) helps designers evaluate device performance, supporting fast development and analysis of data transmission systems using any of the SN65HVD147x, SN65HVD179x, SN65HVD3x, SN65HVD5x and SN65HVD7x full-duplex transceivers in a 14-pin D package. The (...)
RS485-HF-DPLX-EVM — RS-485 하프 듀플렉스 평가 모듈
SN65HVD72EVM — SN65HVD72EVM 평가 모듈
The SN65HVD72EVM evaluation module (EVM) helps you evaluate device performance, supporting fast development and analysis of data transmission systems using the SN65HVD72, SN65HVD75 and SN65HVD78 transceivers. The EVM board comes with the SN65HVD75 (20 Mbps) device soldered to the board. (...)
TIDA-00202 — HIPERFACE 위치 인코더 인터페이스 레퍼런스 디자인
TIDA-00202 레퍼런스 설계는 HIPERFACE 위치 인코더에 대한 EMC 규격 준수 산업용 하이브리드 아날로그 및 디지털 인터페이스입니다. IEC-ESD 및 IEC-EFT 보호를 지원하는 3.3V 전원 RS485 트랜시버는 양방향 매개 변수 채널에 사용됩니다. 아날로그 sin/cos 신호 채널의 경우 두 가지 옵션이 제공되므로 두 가지 옵션을 동시에 사용하여 임베디드 ADC 또는 이중화 유무에 관계없이 프로세서에 자유롭게 연결할 수 있습니다. 첫 번째 옵션은 SPI 출력을 지원하는 완전 차동 이중 12비트 ADC가 (...)
TIDA-00203 — 32비트 ARM Cortex-M4F MCU를 사용하는 초소형 CAN-이더넷 컨버터 레퍼런스 디자인
This reference design demonstrates a small form-factor Controller Access Network (CAN)-to-Ethernet converter using the TM4C129XNCZAD 32-bit ARM® Cortex™-M4F MCU. Supporting 10/100 Base-T compliant with IEEE 802.3 standard, this reference design is useful for industrial drives (...)
TIDA-00485 — 24VAC 전원을 지원하는 비절연 RS-485-와이파이 브리지 레퍼런스 디자인
TIDA-00485 uses our SimpleLink Wi-Fi CC3200 Internet-on-a-chip wireless MCU module to create a data bridge between an RS-485 network and a Wi-Fi® network. The SN65HVD72 transceiver provides the RS-485 interface with 12 kV of ESD protection and additional protection is provided on board. (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VSON (DRB) | 8 | Ultra Librarian |
| SOIC (D) | 8 | Ultra Librarian |
| VSSOP (DGK) | 8 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.