TPS5450
- Wide input voltage range: 5.5 V to 36 V
- Up to 5-A continuous (6-A peak) output current
- High efficiency greater than 90% enabled by 110-mΩ integrated MOSFET switch
- Wide output voltage range: adjustable down to 1.22 V with 1.5% initial accuracy
- Internal compensation minimizes external part count
- Fixed 500-kHz switching frequency for small filter size
- 18-µA shutdown supply current
- Improved line regulation and transient response by input voltage feedforward
- System protected by overcurrent limiting, overvoltage protection, and thermal shutdown
- –40°C to 125°C operating junction temperature range
- Available in small thermally enhanced 8-pin SOIC PowerPAD™ package
The TPS5450 is a high-output-current PWM converter that integrates a low-resistance, high-side N-channel MOSFET. Included on the substrate with the listed features are a high-performance voltage error amplifier that provides tight voltage regulation accuracy under transient conditions; an undervoltage-lockout circuit to prevent start-up until the input voltage reaches 5.5 V; an internally set slow-start circuit to limit inrush currents; and a voltage feed-forward circuit to improve the transient response. Using the ENA pin, shutdown supply current is reduced to 18 µA typically. Other features include an active-high enable, overcurrent limiting, overvoltage protection and thermal shutdown. To reduce design complexity and external component count, the TPS5450 feedback loop is internally compensated.
The TPS5450 device is available in a thermally-enhanced, 8-pin SOIC PowerPAD package. TI provides evaluation modules and software tool to aid in achieving high-performance power supply designs to meet aggressive equipment development cycles.
기술 문서
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPS5450 5-A, Wide Input Range, Step-Down Converter datasheet (Rev. E) | PDF | HTML | 2022/07/15 |
| Circuit design | Power-supply margining circuit for SMPS using a precision DAC (Rev. A) | 2019/09/03 | ||
| Selection guide | Power Management Guide 2018 (Rev. R) | 2018/06/25 | ||
| EVM User's guide | TPS5450EVM-254 5-A, Swift Regulator Evaluation Module | 2007/04/26 | ||
| Application note | Using TPS5410/20/30/31/50 w/Aluminum/Ceramic Output Capacitors (Rev. C) | 2007/03/21 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS5450EVM-254 — 5A 평가 모듈
This evaluation module is designed to demonstrate a typical printed-circuit-board application using the TPS5450 regulator (Vin 10 V - 31 V, up to 5 A). This does not reflect the full range of possible input and output voltages that may be used when designing with this part.
The switching frequency (...)
TUSB319EVM — USB Type-C DFP 포트 컨트롤러 평가 모듈
TUSB319EVM은 Type-C USB 충전기에 이상적인 DFP 컨트롤러인 완전한 레퍼런스 설계를 제공하며 최대 3A@5V VBUS 전원 신호 및 VBUS 감지를 지원합니다.
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| HSOIC (DDA) | 8 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치