이 제품의 최신 버전이 있습니다
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TPS549B22
- Input voltage (PVIN): 1.5V to 18V
- Input bias voltage (VDD) range: 4.5V to 22V
- Output voltage range: 0.6V to 5.5V
- Integrated, 4.1mΩ and 1.9mΩ power MOSFETs with 25A continuous output current
- Voltage reference 0.6V to 1.2V in 50mV steps using VSEL pin
- ±0.5%, 0.9VREF tolerance range: –40°C to +125°C junction temperature
- True differential remote sense amplifier
- D-CAP3™ control mode
- Adaptive on-time control with 8 PMBus frequencies: 315kHz, 425kHz, 550kHz, 650kHz, 825kHz, 900kHz, 1.025MHz, 1.125MHz
- Temperature compensated and programmable current limit with RILIM and OC clamp
- Choice of hiccup or latch-off OVP or UVP
- VDD UVLO External Adjustment by Precision EN
- Prebias start-up support
- Eco-mode and FCCM selectable
- Full suite of fault protection and PGOOD
- Standard VOUT_COMMAND and VOUT_MARGIN (HIGH and LOW)
- Pin-strapping and on-the-fly programming
- Fault reporting and warning
- NVM backup for selected commands
- 1MHz PMBus with PEC and SMB_ALRT#
- Create a custom design using the TPS549B22 with the WEBENCH Power Designer
The TPS549B22 device is a compact single buck converter with adaptive on-time, D-CAP3 control mode. The device is designed for high accuracy, high efficiency, fast transient response, ease-of-use, low external component count and space-conscious power systems.
This device features full differential sense and TI integrated FETs with a high-side on-resistance of 4.1mΩ and a low-side on-resistance of 1.9mΩ. The device also features an accurate 0.5%, 0.9V reference with an ambient temperature range between –40°C and +125°C. Competitive features include: very low external component count, accurate load regulation and line regulation, auto-skip or FCCM mode operation, and internal soft-start control.
The TPS549B22 device is available in 7mm × 5mm, 40-pin, LQFN-CLIP (RVF) package (RoHs exempt).
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPS549B22 1.5V to 18V VIN , 4.5V to 22V VDD , 25A SWIFT Step-Down Converter With Full Differential Sense and PMBus® datasheet (Rev. A) | PDF | HTML | 2024/02/27 |
| Application note | Measuring the Bode Plot of D-CAP™, D-CAP2™, and D-CAP3™ DC/DC Converters (Rev. A) | PDF | HTML | 2023/04/21 | |
| Application note | DC/DC Converter Solutions for Hardware Accelerators in Data Center Applications (Rev. A) | PDF | HTML | 2021/05/04 | |
| Selection guide | Buck Converter Quick Reference Guide (Rev. B) | 2021/04/08 | ||
| Application note | Point-of-Load Solutions for Data Center App Implementing VR13.HC Vccin Spec (Rev. A) | PDF | HTML | 2020/01/08 | |
| Technical article | Powering FPGAs - What to consider with Xilinx UltraScale+ FPGAs | PDF | HTML | 2018/01/29 | |
| Application note | Calculating Output Capacitance to Meet Transient and Ripple Requirements | 2017/05/02 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS549B22EVM-847 — TPS549B22 DCAP3 고성능, 25A 단일 동기 스텝다운 컨버터 평가 모듈
TPS549B22EVM-847는 사용자가 TPS549B22 벅 컨버터의 작동과 기능을 쉽게 평가하고 테스트할 수 있도록 설계되었습니다. 이 EVM은 5mm x 7mm QFN 패키지로 1.5V~18V 입력 전압을 최대 25A를 제공하는 조정된 1.0V 출력 전압으로 변환합니다. 이 보드는 주요 파형을 손쉽게 측정할 수 있도록 테스트 포인트를 제공하며, PMBus 인터페이스 평가를 위해 Fusion Power Designer와 연동됩니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| LQFN-CLIP (RVF) | 40 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.