TPS563207
- 3-A converter with integrated 95-mΩ and 57-mΩ FETs
- D-CAP2™ mode control with fast transient response
- Input voltage range: 4.3 V to 17 V
- Output voltage range: 0.806 V to 7 V
- Continuous current mode (FCCM mode)
- Typical 580-kHz switching frequency
- Low shutdown current of less than 3 µA
- 2% feedback voltage accuracy (25°C)
- Provide pre-bias function
- Cycle-by-cycle overcurrent limit
- Hiccup-mode overcurrent protection
- Non-latch UVP and TSD protections
- Fixed soft start: 1.2 ms
The TPS563207 is a simple, easy-to-use, 3-A synchronous buck converter in a SOT563 package.
The device is optimized to operate with minimum external components.
This switch mode power supply (SMPS) device employs D-CAP2™ mode control, providing a fast transient response and supporting both low-equivalent series resistance (ESR) output capacitors such as specialty polymer and ultra-low ESR ceramic capacitors with no external compensation components.
The TPS563207 operates in FCCM mode, which maintains small ripple even at light loads. The TPS563207 is available in a 6-pin 1.6-mm × 1.6-mm SOT563 (DRL) package, and specified from a –40°C to 125°C junction temperature.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPS563207 4.3-V to 17-V Input, 3-A Synchronous Buck Converter in SOT563 datasheet | PDF | HTML | 2020/09/09 |
| Application note | How to Co-Layout Three Common SOT-563 Package Pinouts (Rev. B) | PDF | HTML | 2024/08/27 | |
| Application brief | How to do Co-Layout Between Two Types of SOT563 Packages | PDF | HTML | 2022/10/27 | |
| Application note | How to Understand LC Table and Select LC About TPS563202 | PDF | HTML | 2021/05/17 | |
| Certificate | TPS563207EVM EU Declaration of Conformity (DoC) | 2020/05/14 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS563207EVM — 4.3V~17V 입력, 2A 동기 스텝다운 컨버터 평가 모듈
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-5X3 (DRL) | 6 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.