TXE8116
- Operating supply voltage range of 1.65V to 5.5V
- Low standby current consumption of 2.3µA typical
- SPI SCLK Frequency
- 10MHz from 3.3V to 5.5V
- 5MHz from 1.65V to 5.5V
- Active-low reset input (RESET)
- 5V tolerant input and output ports
- Buit-in fail-safe I/O feature
- Open-drain active-low interrupt output (INT)
- Individual I/O control and the glitch filter supported on all inputs of the GPIOs
- SPI daisy-chain supported
- I/O reading burst mode supported
- I/O polarity inversion supported
- Bus-hold feature to maintain the last I/O state
- Latched outputs with high-current drive capability for directly driving LEDs
- Latch-up performance exceeds 100mA per JESD 78, class II
- ESD protection exceeds JESD 22
- 2000V Human-body model (A114-A)
- 1000V Charged-device model (C101)
The TXE81XX devices provide general purpose parallel input/output (I/O) expansion for the four wire Serial Peripheral Interface (SPI) protocol and is designed for 1.65V to 5.5V VCC operation.
The device supports 10MHz from 3.3V to 5.5V and 5MHz from 1.65V to 5.5V. I/O expanders, such as the TXE81XX, provide a simple solution when additional I/Os are needed for switches, sensors, push-buttons, LEDs, and fans.
The TXE81XX devices have I/O ports, which include additional features designed to enhance the I/O performance in terms of speed, power consumption, and flexibility. The additional features are: enable/disable pull-up and pull-down resistors, latchable inputs, maskable interrupt, interrupt status register, programmable open-drain or push-pull outputs, and a fail-safe register mode which is enabled by the FAIL-SAFE pin.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TXE81XX 16-Bit and 24-Bit SPI Bus I/O Expander with Interrupt Output, Reset Input, and I/O Configuration Registers datasheet (Rev. A) | PDF | HTML | 2025/10/22 |
| Application brief | Understanding the SPI Bus | PDF | HTML | 2025/08/22 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
IO-EXP-ADAPTER-EVM — IO 확장기 어댑터 평가 모듈
TXE81XXEVM — TXE81XX 평가 모듈
TXE81XXEVM을 사용하면 SPI I/O 확장기 TXE81XX 제품군을 평가할 수 있습니다. 이 EVM은 리드 패키지 유형 DGS(24 및 32) 및 DGG(56)에서 TXE8116, TXE8124 및 TXE8148(각각 16비트, 24비트 및 48비트)을 지원합니다. 이 EVM은 각 확장기에서 제공하는 많은 I/O를 함께 사용할 수 있는 여러 테스트 포인트 및 헤더에 대한 액세스를 제공합니다. 션트 연결을 쉽게 할 수 있는 수 헤더와 암 헤더 유형이 혼합되어 있습니다.
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VSSOP (DGS) | 24 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.