AMC23C11
- Wide high-side supply range: 3V to 27V
- Low-side supply range: 2.7V to 5.5V
- Adjustable threshold: 20mV to 2.7V
- Reference current for threshold adjustment:
- 100µA, ±1%
- Trip threshold error: ±1% (max) at 250mV
- Open-drain output with optional latch mode
- Propagation delay: 240ns (typ)
- High CMTI: 75V/ns (min)
- Safety-related certifications:
- 7000VPK reinforced isolation per DIN EN IEC 60747-17 (VDE 0884-17)
- 5000VRMS isolation for 1 minute per UL1577
- Fully specified over the extended industrial temperature range: –40°C to +125°C
The AMC23C11 is an isolated comparator with a short response time. The open-drain output is separated from the input circuitry by an isolation barrier that is highly resistant to magnetic interference. This barrier is certified to provide reinforced galvanic isolation of up to 5kVRMS according to VDE 0884-17 and UL1577, and supports a working voltage of up to 1kVRMS.
The trip threshold is adjustable from 20mV to 450mV in low-hysteresis mode and from 600mV to 2.7V in high-hysteresis mode through a single external resistor.
The open-drain output on the device supports transparent mode (LATCH input tied to GND2) where the output follows the input state, or latch mode, where the output is cleared on the falling edge of the latch input signal.
The AMC23C11 is available in an 8-pin, wide-body SOIC package and is specified over the extended industrial temperature range of –40°C to +125°C.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | AMC23C11 Fast Response, Reinforced Isolated Comparator With Adjustable Threshold and Latch Function datasheet (Rev. B) | PDF | HTML | 2024年 12月 12日 |
| Application brief | Utilizing AMC3311 to Power AMC23C11 for Isolated Sensing and Fault Detection | PDF | HTML | 2023年 11月 9日 | |
| Application note | Discrete DESAT for Opto-Compatible Isolated Gate Driver UCC23513 in Motor Drives | PDF | HTML | 2023年 10月 24日 | |
| Certificate | UL Certificate of Compliance Vol4 Sec5 E181974 (Rev. A) | 2023年 1月 23日 | ||
| Application note | Design Considerations for Current Sensing in DC EV Charging Applications | PDF | HTML | 2022年 12月 13日 | |
| Application note | DC+ Bus Power-Supply Solution Using Bootstrap Charge Pump Technique | PDF | HTML | 2022年 4月 6日 | |
| Technical article | Addressing the growing needs of fault detection in high-power systems | PDF | HTML | 2022年 4月 1日 | |
| Analog Design Journal | Using isolated comparators for fault detection in electric motor drives | PDF | HTML | 2022年 3月 14日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
TIEVM-ARC-AFE — 太陽能應用中適用於 C2000™ MCU 架構機器學習電弧偵測的類比前端
TIEVM-ARC-AFE 是 TIDA-010955 參考設計的可訂購版本。此參考設計具備類比前端，可在以人工智慧 (AI) 為基礎的太陽能應用中進行 DC 電弧偵測。DC 電弧會對 DC 串列電流造成高頻雜訊。為了偵測電弧頻率，會擷取資料並將資料饋入嵌入式 AI 模型，而該模型會接受識別電弧的訓練。相較於傳統的電弧偵測方法，如此可實現更高的準確度，同時也能減少運算工作量。除了電弧偵測的訊號鏈外，此設計亦提供收集與標示電弧資料的功能，以用於進行嵌入式 AI 模型訓練。此硬體可搭配 TMDSCNCD28P55X (C2000™ F28P55x 裝置的 controlCARD) 運作，亦可搭配 (...)
TIDA-010955 — 太陽能應用中適用於機器學習電弧偵測的類比前端參考設計
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOIC (DWV) | 8 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。