SGLS307P July   2006  – February 2018 TLK2711-SP

PRODUCTION DATA.  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
    1.     External Component Interconnection
  4. 4 Revision History
  5. 5 Description (continued)
  6. 6 Pin Configuration and Functions
    1.     Pin Functions
  7. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 TTL Input Electrical Characteristics
    6. 7.6 Transmitter/Receiver Electrical Characteristics
    7. 7.7 Reference Clock (TXCLK) Timing Requirements
    8. 7.8 TTL Output Switching Characteristics
    9. 7.9 Typical Characteristics
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1  Transmit Interface
      2. 8.3.2  Transmit Data Bus
      3. 8.3.3  Data Transmission Latency
      4. 8.3.4  8-Bit/10-Bit Encoder
      5. 8.3.5  Pseudo-Random Bit Stream (PRBS) Generator
      6. 8.3.6  Parallel to Serial
      7. 8.3.7  High-Speed Data Output
      8. 8.3.8  Receive Interface
      9. 8.3.9  Receive Data Bus
      10. 8.3.10 Data Reception Latency
      11. 8.3.11 Serial to Parallel
      12. 8.3.12 Comma Detect and 8-Bit/10-Bit Decoding
      13. 8.3.13 LOS Detection
      14. 8.3.14 PRBS Verification
      15. 8.3.15 Reference Clock Input
      16. 8.3.16 Operating Frequency Range
      17. 8.3.17 Testability
      18. 8.3.18 Loopback Testing
      19. 8.3.19 BIST
      20. 8.3.20 Power-On Reset
    4. 8.4 Device Functional Modes
      1. 8.4.1 Power-Down Mode
      2. 8.4.2 High-Speed I/O Directly-Coupled Mode
      3. 8.4.3 High-Speed I/O AC-Coupled Mode
  9. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
      3. 9.2.3 Application Curves
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12Device and Documentation Support
    1. 12.1 Receiving Notification of Documentation Updates
    2. 12.2 Community Resources
    3. 12.3 Trademarks
    4. 12.4 Electrostatic Discharge Caution
    5. 12.5 Glossary
  13. 13Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

8.3.10 Data Reception Latency

The serial-to-parallel data receive latency is the time from when the first bit arrives at the receiver until it is output in the aligned parallel word. The receive latency is fixed after the link is established. However, due to silicon process variations and implementation variables such as supply voltage and temperature, the exact delay varies slightly. The minimum receive latency td(Rx latency) is 76-bit times; the maximum is 107-bit times. Figure 11 shows the timing relationship between the serial receive pins, the recovered word clock (RXCLK), and the receive data bus.

TLK2711-SP rec_latena_gls307_.gifFigure 11. Receiver Latency