SWRS201C January   2017  – March 2025 CC2640R2F-Q1

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Functional Block Diagram
  6. 5 Device Comparison
    1. 5.1 Related Products
  7. 6 Pin Configuration and Functions
    1. 6.1 Pin Diagram—RGZ Package
    2. 6.2 Signal Descriptions—RGZ Package
    3. 6.3 Wettable Flanks
  8. 7 Specifications
    1. 7.1  Absolute Maximum Ratings
    2. 7.2  ESD Ratings
    3. 7.3  Recommended Operating Conditions
    4. 7.4  Power Consumption Summary
    5. 7.5  General Characteristics
    6. 7.6  1Mbps GFSK (Bluetooth Low Energy Technology)—RX
    7. 7.7  1Mbps GFSK (Bluetooth Low Energy Technology)—TX
    8. 7.8  24MHz Crystal Oscillator (XOSC_HF)
    9. 7.9  32.768kHz Crystal Oscillator (XOSC_LF)
    10. 7.10 48MHz RC Oscillator (RCOSC_HF)
    11. 7.11 32kHz RC Oscillator (RCOSC_LF)
    12. 7.12 ADC Characteristics
    13. 7.13 Temperature Sensor
    14. 7.14 Battery Monitor
    15. 7.15 Continuous Time Comparator
    16. 7.16 Low-Power Clocked Comparator
    17. 7.17 Programmable Current Source
    18. 7.18 Synchronous Serial Interface (SSI)
    19. 7.19 DC Characteristics
    20. 7.20 Thermal Resistance Characteristics for RGZ Package
    21. 7.21 Timing Requirements
    22. 7.22 Switching Characteristics
    23. 7.23 Typical Characteristics
  9. 8 Detailed Description
    1. 8.1  Overview
    2. 8.2  Main CPU
    3. 8.3  RF Core
    4. 8.4  Sensor Controller
    5. 8.5  Memory
    6. 8.6  Debug
    7. 8.7  Power Management
    8. 8.8  Clock Systems
    9. 8.9  General Peripherals and Modules
    10. 8.10 System Architecture
  10. 9 Application, Implementation, and Layout
    1. 9.1 Application Information
    2. 9.2 7 × 7 Internal Differential (7ID) Application Circuit
      1. 9.2.1 Layout
  11. 10Device and Documentation Support
    1. 10.1 Device Nomenclature
    2. 10.2 Tools and Software
    3. 10.3 Documentation Support
    4. 10.4 Texas Instruments Low-Power RF Website
    5. 10.5 Support Resources
    6. 10.6 Trademarks
    7. 10.7 Electrostatic Discharge Caution
    8. 10.8 Export Control Notice
    9. 10.9 Glossary
  12. 11Revision History
  13. 12Mechanical, Packaging, and Orderable Information
    1. 12.1 Packaging Information

Package Options

Refer to the PDF data sheet for device specific package drawings

Mechanical Data (Package|Pins)
  • RGZ|48
Thermal pad, mechanical data (Package|Pins)
Orderable Information

7.6 1Mbps GFSK (Bluetooth Low Energy Technology)—RX

Measured on the TI CC2640Q1EM-7ID reference design with Tc = 25°C, VDDS = 3.0V, fRF = 2440MHz, unless otherwise noted.
PARAMETERTEST CONDITIONSMINTYPMAXUNIT
Receiver sensitivityDifferential mode. Measured at the CC2640Q1EM-7ID SMA connector, BER = 10–3–97dBm
Receiver saturationDifferential mode. Measured at the CC2640Q1EM-7ID SMA connector, BER = 10–34dBm
Frequency error toleranceDifference between the incoming carrier frequency and the internally generated carrier frequency–350350kHz
Data rate error toleranceDifference between incoming data rate and the internally generated data rate–750750ppm
Co-channel rejection(3)Wanted signal at –67dBm, modulated interferer in channel, BER = 10–3–6dB
Selectivity, ±1MHz(3)Wanted signal at –67dBm, modulated interferer at ±1MHz, BER = 10–37 / 2(1)dB
Selectivity, ±2MHz(3)Wanted signal at –67dBm, modulated interferer at ±2MHz, Image frequency is at –2MHz, BER = 10–339 / 17(2)(1)dB
Selectivity, ±3MHz(3)Wanted signal at –67dBm, modulated interferer at ±3MHz, BER = 10–338 / 30(1)dB
Selectivity, ±4MHz(3)Wanted signal at –67dBm, modulated interferer at ±4MHz, BER = 10–342 / 36(1)dB
Selectivity, ±5MHz or more(3)Wanted signal at –67dBm, modulated interferer at ≥ ±5MHz, BER = 10–332dB
Selectivity, Image frequency(3)Wanted signal at –67dBm, modulated interferer at image frequency, BER = 10–317dB
Selectivity, Image frequency
±1MHz(3)		Wanted signal at –67dBm, modulated interferer at ±1MHz from image frequency, BER = 10–32 / 30(1)dB
Out-of-band blocking (4)30MHz to 2000MHz–20dBm
Out-of-band blocking2003MHz to 2399MHz–5dBm
Out-of-band blocking2484MHz to 2997MHz–8dBm
Out-of-band blocking3000MHz to 12.75GHz–8dBm
IntermodulationWanted signal at 2402MHz, –64dBm. Two interferers at 2405 and 2408MHz respectively, at the given power level–34dBm
Spurious emissions,
30MHz to 1000MHz		Conducted measurement in a 50Ω single-ended load. Suitable for systems targeting compliance with EN 300 328, EN 300 440, FCC CFR47, Part 15 and ARIB STD-T-66–65dBm
Spurious emissions,
1GHz to 12.75 GHz		Conducted measurement in a 50Ω single-ended load. Suitable for systems targeting compliance with EN 300 328, EN 300 440, FCC CFR47, Part 15 and ARIB STD-T-66–52dBm
RSSI dynamic range70dB
RSSI accuracy±4dB
(1) X / Y, where X is +N MHz and Y is –N MHz.
(2) +2MHz selectivity is reduced to 33dB when using radio FW supporting 2Mbps and Coded PHYs
(3) Numbers given as I/C dB.
(4) Excluding one exception at Fwanted / 2, per Bluetooth Specification.