SLVSDF3F MARCH 2017 – JANUARY 2019 TPSM846C23
These bits are over current retry time delay retting. The default for this bit is 111b.
|000||A zero value for the retry time delay setting means that the unit does not attempt to delay a restart. This is only supported when Restart is disabled by RS[2:0] = 000. The output remains disabled until the fault is cleared (Refer to section 10.7 of the PMBus specification)|
|111||A one value for the retry time delay setting means that the unit waits 7 TON_RISE times before it goes through a normal startup (Soft start). This is only supported when Restart is enabled by RS[2:0] = 111.|
These bits are direct reflections of the RS (bit 5) value in this register.