Top
Dual Buffer/Driver With 3-State Outputs

SN74LVC2G241

ACTIVE

Product details

Parameters

Technology Family LVC VCC (Min) (V) 1.65 VCC (Max) (V) 5.5 Channels (#) 2 IOL (Max) (mA) 32 ICC (Max) (uA) 10 IOH (Max) (mA) -32 Input type Standard CMOS Output type 3-State Features Balanced outputs, Very high speed (tpd 5-10ns), Partial power down (Ioff), Over-voltage tolerant inputs Data rate (Mbps) 300 Rating Catalog open-in-new Find other Non-Inverting buffer/driver

Package | Pins | Size

DSBGA (YZP) 8 SSOP (DCT) 8 8 mm² 2.95 x 2.80 VSSOP (DCU) 8 6 mm² 2 x 3.1 open-in-new Find other Non-Inverting buffer/driver

Features

  • Available in the Texas Instruments
    NanoFree™ Package
  • Supports 5-V VCC Operation
  • Inputs Accept Voltages to 5.5 V
  • Max tpd of 4.1 ns at 3.3 V
  • Low Power Consumption, 10-µA Maximum ICC
  • ±24-mA Output Drive at 3.3 V
  • Typical VOLP (Output Ground Bounce)
    <0.8 V at VCC = 3.3 V, TA = 25°C
  • Typical VOHV (Output VOH Undershoot)
    >2 V at VCC = 3.3 V, TA = 25°C
  • Ioff Supports Live Insertion, Partial-Power-Down Mode, and Back-Drive Protection
  • Can Be Used as a Down Translator to Translate Inputs From a Max of 5.5 V Down
    to the VCC Level
  • Latch-Up Performance Exceeds 100 mA Per
    JESD 78, Class II
  • ESD Protection Exceeds JESD 22
    • 2000-V Human-Body Model (A114-A)
    • 200-V Machine Model (A115-A)
    • 1000-V Charged-Device Model (C101)

All trademarks are the property of their respective owners.

open-in-new Find other Non-Inverting buffer/driver

Description

This dual buffer and line driver is designed for 1.65-V to 5.5-V VCC operation.

The SN74LVC2G241 device is designed specifically to improve both the performance and density of 3-state memory-address drivers, clock drivers, and bus-oriented receivers and transmitters.

NanoFree package technology is a major breakthrough in IC packaging concepts, using the die as the package.

The SN74LVC2G241 device is organized as two 1-bit line drivers with separate output-enable (1OE, 2OE) inputs. When 1OE is low and 2OE is high, the device passes data from the A inputs to the Y outputs. When 1OE is high and 2OE is low, the outputs are in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor, and OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sinking or the current-sourcing capability of the driver.

This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

open-in-new Find other Non-Inverting buffer/driver
Download

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 29
Type Title Date
* Datasheet SN74LVC2G241 Dual Buffer and Driver With 3-State Outputs datasheet (Rev. P) Dec. 03, 2018
Selection guides Little Logic Guide 2018 (Rev. G) Jul. 06, 2018
Selection guides Logic Guide (Rev. AB) Jun. 12, 2017
Application notes How to Select Little Logic (Rev. A) Jul. 26, 2016
Application notes Implications of Slow or Floating CMOS Inputs (Rev. D) Jun. 23, 2016
Application notes Understanding and Interpreting Standard-Logic Data Sheets (Rev. C) Dec. 02, 2015
User guides LOGIC Pocket Data Book (Rev. B) Jan. 16, 2007
More literature Design Summary for WCSP Little Logic (Rev. B) Nov. 04, 2004
Application notes Semiconductor Packing Material Electrostatic Discharge (ESD) Protection Jul. 08, 2004
Application notes Selecting the Right Level Translation Solution (Rev. A) Jun. 22, 2004
User guides Signal Switch Data Book (Rev. A) Nov. 14, 2003
Application notes Use of the CMOS Unbuffered Inverter in Oscillator Circuits Nov. 06, 2003
More literature Logic Cross-Reference (Rev. A) Oct. 07, 2003
User guides LVC and LV Low-Voltage CMOS Logic Data Book (Rev. B) Dec. 18, 2002
Application notes Texas Instruments Little Logic Application Report Nov. 01, 2002
Application notes TI IBIS File Creation, Validation, and Distribution Processes Aug. 29, 2002
More literature Standard Linear & Logic for PCs, Servers & Motherboards Jun. 13, 2002
Application notes 16-Bit Widebus Logic Families in 56-Ball, 0.65-mm Pitch Very Thin Fine-Pitch BGA (Rev. B) May 22, 2002
Application notes Power-Up 3-State (PU3S) Circuits in TI Standard Logic Devices May 10, 2002
More literature STANDARD LINEAR AND LOGIC FOR DVD/VCD PLAYERS Mar. 27, 2002
More literature Military Low Voltage Solutions Apr. 04, 2001
Application notes Migration From 3.3-V To 2.5-V Power Supplies For Logic Devices Dec. 01, 1997
Application notes Bus-Interface Devices With Output-Damping Resistors Or Reduced-Drive Outputs (Rev. A) Aug. 01, 1997
Application notes CMOS Power Consumption and CPD Calculation (Rev. B) Jun. 01, 1997
Application notes LVC Characterization Information Dec. 01, 1996
Application notes Input and Output Characteristics of Digital Integrated Circuits Oct. 01, 1996
Application notes Live Insertion Oct. 01, 1996
User guides Low-Voltage Logic (LVC) Designer's Guide Sep. 01, 1996
Application notes Understanding Advanced Bus-Interface Products Design Guide May 01, 1996

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARDS Download
document-generic User guide
10
Description
Flexible EVM designed to support any device that has a DCK, DCT, DCU, DRL, or DBV package in a 5 to 8 pin count.
Features
  • Board design allows for versatility in evaluation
  • Supports a wide-range of logic devices
EVALUATION BOARDS Download
document-generic User guide
Description
What is BeagleBone® AI?

Built on the proven BeagleBoard.org® open source Linux approach, BeagleBone® AI fills the gap between small SBCs and more powerful industrial computers. Based on the Texas Instruments, Sitara™ AM5729 processor, developers have access to a highly integrated and (...)

Design tools & simulation

SIMULATION MODELS Download
SCEM291A.ZIP (52 KB) - IBIS Model
SIMULATION MODELS Download
SCEM614.ZIP (7 KB) - PSpice Model

Reference designs

REFERENCE DESIGNS Download
EtherCAT Slave and Multi-Protocol Industrial Ethernet Reference Design
TIDA-00299 This reference design implements a cost-optimized high EMC immunity EtherCAT slave (dual ports) with SPI-interface to the application processor. The hardware design is capable of supporting multi-protocol industrial ethernet and field-busses using the AMIC110 industrial communications processor. The (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Universal data concentrator reference design supporting Ethernet, 6LoWPAN RF mesh and more
TIDA-010032 — IPv6-based grid communications are becoming the standard choice in industrial markets and applications like smart meters and grid automation. The universal data concentrator design provides a complete IPv6-based network solution integrated with Ethernet backbone communication, 6LoWPAN RF mesh (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
12mm x 12mm, 5-Rail Power Sequencing for Application Processors Reference Design
TIDA-01568 — This reference design demonstrates a validated and cost competitive power sequencing solution for an application processor or a high performance control platform. This design supports 5 different voltage rails, optimized with layout space of 12 mm × 12 mm. The design is also capable of (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
3D Machine Vision Reference Design Based on AM572x Processor with DLP® Structured Light
TIDEP0076 — The TIDEP0076 3D machine vision design describes an embedded 3D scanner based on the structured light principle. A digital camera along with a Sitara™ AM57xx processor System on Chip (SoC)  is used to capture reflected light patterns from a DLP4500-based projector. Subsquent processing of (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Monte-Carlo Simulation on AM57x Using OpenCL for DSP Acceleration Reference Design
TIDEP0046 TI’s high performance ARM® Cortex®-A15 based AM57x processors also integrate C66x DSPs. These DSPs were designed to handle high signal and data processing tasks that are often required by industrial, automotive and financial applications. The AM57x OpenCL implementation makes it easy (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Power and Thermal Design Considerations Using TI's AM57x Processor Reference Design
TIDEP0047 This TI Design (TIDEP0047) is a reference platform based on the AM57x processor and companion TPS659037 power management integrated circuit (PMIC).  This TI Design specifically highlights important power and thermal design considerations and techniques for systems designed with AM57x and (...)
document-generic Schematic document-generic User guide

CAD/CAE symbols

Package Pins Download
DSBGA (YZP) 8 View options
SM8 (DCT) 8 View options
VSSOP (DCU) 8 View options

Ordering & quality

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos