TMS320F28376S

ACTIVE

C2000™ 32-bit MCU with 400 MIPS, 1xCPU, 1xCLA, FPU, TMU, 512 KB Flash, EMIF, 16b ADC

Top
C2000™ 32-bit MCU with 400 MIPS, 1xCPU, 1xCLA, FPU, TMU, 512 KB Flash, EMIF, 16b ADC

TMS320F28376S

ACTIVE

Product details

Parameters

Features External Memory Interface, FPU32 Total processing (MIPS) 400 Frequency (MHz) 200 Flash memory (KB) 512 ADC resolution 16-bit /12-bit RAM (KB) 132 Sigma-delta filter 8 PWM (Ch) 24 High-resolution PWM (ch) 16 UART (SCI) 4 I2C 2 SPI 3 CAN (#) 2 Direct memory access (Ch) 6 QEP 3, 2 USB 1 Operating temperature range (C) -40 to 125, -40 to 105 Rating Catalog TI functional safety category Functional Safety-Compliant open-in-new Find other C2000 real-time control MCUs

Package | Pins | Size

HLQFP (PTP) 176 676 mm² 26 x 26 HTQFP (PZP) 100 256 mm² 16 x 16 NFBGA (ZWT) 337 256 mm² 16 x 16 open-in-new Find other C2000 real-time control MCUs

Features

  • TMS320C28x 32-bit CPU
    • 200 MHz
    • IEEE 754 single-precision Floating-Point Unit (FPU)
    • Trigonometric Math Unit (TMU)
    • Viterbi/Complex Math Unit (VCU-II)
  • Programmable Control Law Accelerator (CLA)
    • 200 MHz
    • IEEE 754 single-precision floating-point instructions
    • Executes code independently of main CPU
  • On-chip memory
    • 512KB (256KW) or 1MB (512KW) of flash (ECC-protected)
    • 132KB (66KW) or 164KB (82KW) of RAM
      (ECC-protected or parity-protected)
    • Dual-zone security supporting third-party development
    • Unique identification number
  • Clock and system control
    • Two internal zero-pin 10-MHz oscillators
    • On-chip crystal oscillator
    • Windowed watchdog timer module
    • Missing clock detection circuitry
  • 1.2-V core, 3.3-V I/O design
  • System peripherals
    • Two External Memory Interfaces (EMIFs) with ASRAM and SDRAM support
    • 6-channel Direct Memory Access (DMA) controller
    • Up to 169 individually programmable, multiplexed General-Purpose Input/Output (GPIO) pins with input filtering
    • Expanded Peripheral Interrupt controller (ePIE)
    • Multiple Low-Power Mode (LPM) support with external wakeup
  • Communications peripherals
    • USB 2.0 (MAC + PHY)
    • Support for 12-pin 3.3 V-compatible Universal Parallel Port (uPP) interface
    • Two Controller Area Network (CAN) modules (pin-bootable)
    • Three high-speed (up to 50-MHz) SPI ports (pin-bootable)
    • Two Multichannel Buffered Serial Ports (McBSPs)
    • Four Serial Communications Interfaces (SCI/UART) (pin-bootable)
    • Two I2C interfaces (pin-bootable)
  • Analog subsystem
    • Up to four Analog-to-Digital Converters (ADCs)
      • 16-bit mode
        • 1.1 MSPS each (up to 4.4-MSPS system throughput)
        • Differential inputs
        • Up to 12 external channels
      • 12-bit mode
        • 3.5 MSPS each (up to 14-MSPS system throughput)
        • Single-ended inputs
        • Up to 24 external channels
      • Single Sample-and-Hold (S/H) on each ADC
      • Hardware-integrated post-processing of ADC conversions
        • Saturating offset calibration
        • Error from setpoint calculation
        • High, low, and zero-crossing compare, with interrupt capability
        • Trigger-to-sample delay capture
    • Eight windowed comparators with 12-bit Digital-to-Analog Converter (DAC) references
    • Three 12-bit buffered DAC outputs
  • Enhanced control peripherals
    • 24 PWM channels with enhanced features
    • 16 High-Resolution Pulse Width Modulator (HRPWM) channels
      • High resolution on both A and B channels of 8 PWM modules
      • Dead-band support (on both standard and high resolution)
    • Six Enhanced Capture (eCAP) modules
    • Three Enhanced Quadrature Encoder Pulse (eQEP) modules
    • Eight Sigma-Delta Filter Module (SDFM) input channels, 2 parallel filters per channel
      • Standard SDFM data filtering
      • Comparator filter for fast action for out of range
  • Configurable Logic Block (CLB)
    • Augments existing peripheral capability
    • Supports position manager solutions
  • Functional Safety-Compliant
    • Developed for functional safety applications
    • Documentation available to aid ISO 26262 system design up to ASIL D; IEC 61508 up to SIL 3; IEC 60730 up to Class C; and UL 1998 up to Class 2
    • Hardware integrity up to ASIL B, SIL 2
  • Safety-related certification
  • Package options:
    • Lead-free, green packaging
    • 337-ball New Fine Pitch Ball Grid Array (nFBGA) [ZWT suffix]
    • 176-pin PowerPAD™ Thermally Enhanced Low-Profile Quad Flatpack (HLQFP)
      [PTP suffix]
    • 100-pin PowerPAD Thermally Enhanced Thin Quad Flatpack (HTQFP) [PZP suffix]
  • Temperature options:
    • T: –40ºC to 105ºC junction
    • S: –40ºC to 125ºC junction
    • Q: –40ºC to 125ºC free-air
      (AEC Q100 qualification for automotive applications)

All trademarks are the property of their respective owners.

open-in-new Find other C2000 real-time control MCUs

Description

C2000™ 32-bit microcontrollers are optimized for processing, sensing, and actuation to improve closed-loop performance in real-time control applications such as industrial motor drives; solar inverters and digital power; electrical vehicles and transportation; motor control; and sensing and signal processing. The C2000 line includes the Premium performance MCUs and the Entry performance MCUs.

The TMS320F2837xS is a powerful 32-bit floating-point microcontroller unit (MCU) designed for advanced closed-loop control applications such as industrial motor drives; solar inverters and digital power; electrical vehicles and transportation; and sensing and signal processing. To accelerate application development, the DigitalPower software development kit (SDK) for C2000 MCUs and the MotorControl software development kit (SDK) for C2000™ MCUs are available.

The real-time control subsystem is based on TI’s 32-bit C28x floating-point CPU, which provides 200 MHz of signal processing performance. The C28x CPU is further boosted by the new TMU accelerator, which enables fast execution of algorithms with trigonometric operations common in transforms and torque loop calculations; and the VCU accelerator, which reduces the time for complex math operations common in encoded applications.

The F2837xS microcontroller family features a CLA real-time control coprocessor. The CLA is an independent 32-bit floating-point processor that runs at the same speed as the main CPU. The CLA responds to peripheral triggers and executes code concurrently with the main C28x CPU. This parallel processing capability can effectively double the computational performance of a real-time control system. By using the CLA to service time-critical functions, the main C28x CPU is free to perform other tasks, such as communications and diagnostics.

The TMS320F2837xS supports up to 1MB (512KW) of onboard flash memory with error correction code (ECC) and up to 164KB (82KW) of SRAM. Two 128-bit secure zones are also available on the CPU for code protection.

Performance analog and control peripherals are also integrated on the F2837xS MCU to further enable system consolidation. Four independent 16-bit ADCs provide precise and efficient management of multiple analog signals, which ultimately boosts system throughput. The new sigma-delta filter module (SDFM) works in conjunction with the sigma-delta modulator to enable isolated current shunt measurements. The Comparator Subsystem (CMPSS) with windowed comparators allows for protection of power stages when current limit conditions are exceeded or not met. Other analog and control peripherals include DACs, PWMs, eCAPs, eQEPs, and other peripherals.

Peripherals such as EMIFs, CAN modules (ISO 11898-1/CAN 2.0B-compliant), and a new uPP interface extend the connectivity of the F2837xS. The uPP interface is a new feature of the C2000™ MCUs and supports high-speed parallel connection to FPGAs or other processors with similar uPP interfaces. Lastly, a USB 2.0 port with MAC and PHY lets users easily add universal serial bus (USB) connectivity to their application.

To learn more about the C2000 MCUs, visit the C2000 Overview at www.ti.com/c2000.

 

open-in-new Find other C2000 real-time control MCUs
Download

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 91
Type Title Date
* Datasheet TMS320F2837xS Microcontrollers datasheet (Rev. I) Jun. 25, 2020
* Errata TMS320F2837xS MCUs Silicon Errata (Rev. I) Jun. 25, 2020
* User guides TMS320F2837xS Microcontrollers Technical Reference Manual (Rev. G) Sep. 10, 2019
Application notes How to Migrate Custom Logic From an FPGA/CPLD to C2000 Microcontrollers (Rev. A) Jun. 15, 2020
White papers Streamlining Functional Safety Certification in Automotive and Industrial Jun. 09, 2020
User guides Getting Started With C2000 Software User's Guide Jun. 05, 2020
User guides SYS/BIOS (TI-RTOS Kernel) User's Guide (Rev. V) Jun. 01, 2020
User guides C2000 Real-Time Control Peripheral Reference Guide (Rev. N) May 19, 2020
Application notes Software Examples to Showcase Unique Capabilities of TI’s C2000™ CLA Apr. 17, 2020
More literature C2000™ SafeTI™ Enablers (Rev. B) Apr. 15, 2020
Application notes Enhancing the Computational Performance of the C2000™ Microcontroller Famil (Rev. B) Mar. 31, 2020
User guides C2000Ware DigitalPower SDK Getting Started Guide (Rev. B) Mar. 20, 2020
Application notes C2000 Key Technology Guide (Rev. A) Mar. 10, 2020
Application notes CRC Engines in C2000 Devices Jan. 31, 2020
User guides TMS320C28x Extended Instruction Sets Technical Reference Manual (Rev. C) Oct. 29, 2019
Application notes C2000 Security Tool Oct. 17, 2019
Application notes Quick Response Control of PMSM Using Fast Current Loop (Rev. A) Oct. 11, 2019
Application notes Dual-Axis Motor Control Using FCL and SFRA On a Single C2000™ MCU Aug. 07, 2019
Application notes Development Tool Versions for C2000 Support Jul. 19, 2019
User guides C2000™ Software Frequency Response Analyzer (SFRA) Library User’s Guide (Rev. A) Jun. 26, 2019
Application notes C2000™ Unique Device Number (Rev. A) Jun. 11, 2019
More literature Certification for SafeTI Functional Safety Hardware Process (Rev. A) Jun. 07, 2019
User guides Fast Current Loop Driverlib Library User’s Guide May 30, 2019
Application notes Programming Examples for the DCAN Module May 17, 2019
More literature Report on certificate of the Safety MCU by TUV SUD May 07, 2019
More literature TUV SUD product service certificate 1 C2000 May 07, 2019
Technical articles Motor control software development kit jump-starts new designs Apr. 17, 2019
White papers C2000™ MCU SafeTI™ control solutions: An introduction to ASIL decomposition Apr. 10, 2019
User guides DesignDRIVE IDDK Hardware Reference Guide Apr. 10, 2019
User guides DesignDRIVE IDDK User Guide Apr. 10, 2019
Application notes Serial Flash Programming of C2000 Microcontrollers (Rev. C) Mar. 29, 2019
User guides TMS320F2837xD, TMS320F2837xS, and TMS320F2807xsafety manual user's guide (Rev. C) Mar. 27, 2019
User guides C2000Ware motor control SDK getting started guide Mar. 20, 2019
User guides LAUNCHXL-F28377S overview (Rev. D) Mar. 20, 2019
White papers Addressing Systematic and Random hardware faults using C2000 SafeTI Products (Rev. A) Jan. 31, 2019
User guides TMS320F2837xS Delfino Microcontrollers Technical Reference Manual (Rev. F) Jan. 15, 2019
Application notes Updating Firmware on Security Enabled TMS320F2837xx or TMS320F2807x Devices Dec. 04, 2018
User guides C2000 Package for Automotive and Industrial MCUs (Rev. B) Nov. 28, 2018
Application notes CW/CCW Support on the C2000 eQEP Module (Rev. A) Oct. 24, 2018
Application notes Interfacing the C2000 with an AFE03x: B-FSK Example (Rev. C) Sep. 24, 2018
White papers Breakthrough technologies lead the solar power industry into the future Jul. 27, 2018
White papers Exploring the evolution and optimization of wireless power transfer Jul. 27, 2018
White papers Functional Safety: A tunable FMEDA for C2000™ MCUs Jul. 27, 2018
More literature C2000™ Safety Mechanisms Jul. 17, 2018
Application notes PowerPAD™ Thermally Enhanced Package (Rev. H) Jul. 06, 2018
White papers Maximizing power for Level 3 EV charging stations Jun. 12, 2018
White papers Achieving Coexistence of Safety Functions for EV/HEV Using C2000 MCUs May 21, 2018
Application notes C2000 MCU JTAG Connectivity Debug May 11, 2018
Application notes Design and Usage Guidelines for the C2000 External Memory Interface (EMIF) (Rev. A) Mar. 23, 2018
Application notes Dual Motor Ctl Using FCL and Perf Analysis Using SFRA on TMS320F28379D LaunchPad (Rev. A) Mar. 20, 2018
User guides Fast Current Loop (C28x) Library Mar. 06, 2018
Application notes Performance Analysis of Fast Current Loop (FCL) in Servo Mar. 06, 2018
User guides SYS/BIOS (TI-RTOS Kernel) User's Guide (Rev. U) Feb. 07, 2018
Application notes Programming TMS320x28xx and 28xxx Peripherals in C/C++ (Rev. E) Dec. 19, 2017
Application notes C2000 CPU Memory Built-In Self-Test Nov. 27, 2017
Application notes Error Detection in SRAM Nov. 01, 2017
Application notes C2000™ Hardware Built-In Self-Test Oct. 26, 2017
Application notes Flexible PWMs Enable Multi-Axis Drives, Multi-Level Inverters (Rev. A) Oct. 20, 2017
User guides TMS320F2837xS Flash API Reference Guide (Rev. A) Aug. 18, 2017
User guides TMS320F2837xS Delfino Microcontrollers Technical Reference Manual (Rev. E) Aug. 15, 2017
User guides TMS320F2837xS Flash API Reference Guide May 18, 2017
Application notes Fast Current Loop Library May 08, 2017
Application notes High Bandwidth Current Control of 3-Phase PMSM Using F2837x FCL Library May 08, 2017
White papers Designing the Next Generation of Industrial Drive and Control Systems (Rev. A) Sep. 12, 2016
Application notes Built-In System Protection for Industrial Drives May 11, 2016
Application notes High-Performance, High-Precision, Smart Sensing for Industrial Drives May 11, 2016
Application notes Semiconductor and IC Package Thermal Metrics (Rev. C) Apr. 19, 2016
Application notes Calculator for CAN Bit Timing Parameters Mar. 22, 2016
Application notes Sensored Field Oriented Control of 3-Phase Perm Magnet Sync Motors Using F2837x Feb. 12, 2016
Application notes The TMS320F2837xD Architecture: Achieving a New Level of High Performance Feb. 11, 2016
User guides Using Position Manager SinCos Library on IDDK User's Guide Jan. 19, 2016
User guides C2000 Position Manager SinCos Library User's Guide Jan. 07, 2016
User guides TMS320F2837xS Delfino Microcontrollers Technical Reference Manual (Rev. C) Sep. 25, 2015
Technical articles How fast is your 32-bit MCU? Jul. 15, 2015
Technical articles Easily increase functionality in motor drive applications May 19, 2015
Technical articles Really smart cities in real time Apr. 25, 2015
User guides TMS320C28x DSP CPU and Instruction Set (Rev. F) Apr. 10, 2015
Application notes Accessing External SDRAM on the TMS320F2837x/2807x Microcontrollers Using C/C++ Mar. 30, 2015
More literature controlSUITE Getting Started Guide (Rev. C) Feb. 09, 2015
White papers Resolver-to-digital conversion implementation (Rev. A) Mar. 26, 2014
Application notes Running an Application from Internal Flash Memory on the TMS320F28xxx DSP (Rev. L) Feb. 28, 2013
Application notes Programming External Nonvolatile Memory Using SDFlash for TMS320C28x Devices Nov. 16, 2009
Application notes EEPROM Emulation With the TMS320F28xxx DSCs Sep. 21, 2009
Application notes TMS320C28x FPU Primer (Rev. A) Jul. 20, 2009
Application notes Common Object File Format (COFF) Apr. 15, 2009
Application notes Using PWM Output as a Digital-to-Analog Converter on a TMS320F280x (Rev. A) Sep. 09, 2008
Application notes Flash Programming Solutions for the TMS320F28xxx DSCs Aug. 19, 2008
Application notes Custom Bootloader Options via One-Time Programmable (OTP) Memory Sep. 18, 2007
Application notes Using Enhanced Pulse Width Modulator (ePWM) Module for 0-100% Duty Cycle Control Dec. 20, 2006
Application notes Using the eQEP Module in TMS320x280x as a Dedicated Capture Nov. 30, 2006
Application notes Online Stack Overflow Detection on the TMS320C28x DSP May 02, 2003

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

DAUGHTER CARDS Download
document-generic User guide
69
Description

TMDSHSECDOCK is a baseboard that provides header pin access to key signals on compatible HSEC180-based controlCARDs.  A breadboard area is available for rapid prototyping.  Board power can be provided by the provided USB cable or a 5V barrel supply.

Features
  • Bread-board like baseboard with HSEC180 controlCARD female connector
    • Header pin access to key MCU signals
    • Breadboard area for customizable routing and prototyping
    • Board power can be provided by the provided USB cable or a 5V barrel supply
DEVELOPMENT KITS Download
document-generic User guide
Description

To get started developing:
Step 1: Buy the C2000 MCU F28379D LaunchPad
Step 2: Read the quick start guide

LAUNCHXL-F28379D is a low cost evaluation and development tool for the F2837xD,  F2837xS, and F2807x series in the TI MCU LaunchPad ecosystem which is compatible with various plug-on BoosterPacks (...)

Features

Hardware features

  • USB connected isolated XDS100v2 JTAG debug probe for real-time debug and flash programming
  • 4x 20-pin headers/connectors
  • Programmable buttons and LEDs
  • TMS320F28379D: 200 MHz dual C28xCPUs and dual CLAs, 1 MB Flash, 16-bit/12-bit ADCs, comparators, 12-bit DACs, delta-sigma sinc filters (...)
DEVELOPMENT KITS Download
document-generic User guide
219
Description

TMDSDOCK28379D is a HSEC180 controlCARD based evaluation and development tool for the C2000™ Delfino™ F2837x and Piccolo F2807x series of microcontroller products. The Docking Station provides power to the controlCARD and has a bread-board area for prototyping. Access to the key device (...)

Features

Hardware Features

  • TMDSCNCD28379D: TMS320F28379D HSEC180 based controlCARD
    • Isolated XDS100v2 USB-to-JTAG Debug Probe enables real-time in-system programming and debugging
  • Bread-board like baseboard with HSEC180 controlCARD female connector
    • Header pin access to key MCU signals
    • Breadboard area for (...)

Software development

SOFTWARE DEVELOPMENT KITS (SDK) Download
DigitalPower software development kit (SDK) for C2000™ MCUs
C2000WARE-DIGITALPOWER-SDK
    • DigitalPower SDK for C2000™ microcontrollers (MCU) is a cohesive set of software infrastructure, tools, and documentation designed to minimize C2000 MCU based digital power system development time targeted for various AC-DC, DC-DC and DC-AC power supply applications. The software includes (...)
Features
      • Complete software repository for C2000 MCU Digital Power Applications: solar, telecom, server, electric vehicle chargers and industrial power delivery
      • powerSUITE: digital power supply software design tools
        • Solution Adapter: Customize code examples to run on example or custom hardware
        • Compensation (...)
SOFTWARE DEVELOPMENT KITS (SDK) Download
MotorControl software development kit (SDK) for C2000™ MCUs
C2000WARE-MOTORCONTROL-SDK
  • MotorControl SDK for C2000™ microcontrollers (MCU) is a cohesive set of software infrastructure, tools, and documentation designed to minimize C2000 MCU based motor control system development time targeted for various three-phase motor control applications. The software includes firmware that (...)
Features
  • Complete software repository for C2000 MCU Motor Control Applications
  • InstaSPIN-FOC: Sensorless FOC solutions
    • Sensorless Torque or Velocity Field Oriented Control
    • FAST™ software observer for premium rotor Flux, Angle, Speed, and Torque estimations
    • Motor Parameter Identification
    • Observer and torque (...)
APPLICATION SOFTWARE & FRAMEWORKS Download
C2000 DesignDRIVE Software for Industrial Drives and Motor Control
DESIGNDRIVE Download DesignDRIVE

View the full DesignDRIVE Story

DesignDRIVE software solutions are part of a platform that is combined with DesignDRIVE Development Kits to make it easy to develop and evaluate solutions for many industrial drive and servo topologies. DesignDRIVE solutions offer support for a wide (...)

Features
  • Fast Current Loop – sub-1 microsecond sensored-FOC (field oriented control) motor control for permanent magnet and AC induction motors
  • Position Manager Solutions on-chip support a variety of position sensors
  • Software drivers for simultaneous current feedback from delta-sigma modulators, fluxgate/Hall (...)
DEBUG PROBES Download
C2000 Gang Programmer
C2000-GANG From Elprotronics, Inc. - The C2000 Gang Programmer is a C2000 device programmer that can program up to eight identical C2000 devices at the same time. The C2000 Gang Programmer connects to a host PC using a standard RS-232 or USB connection and provides flexible programming options that allow the (...)
Features
    • Quickly and reliably program C2000 devices via an RS-232 or USB interface
    • Several programming modes:
- Interactive Mode: Programming while connected to PC using the C2000 GANG Programmer GUI.
- Program from Image: An image can be stored, which contains configuration options and code files. This allows (...)
DEBUG PROBES Download
XDS100v2 JTAG Debug Probe (14-pin TI version)
TMDSEMU100V2U-14T — The Spectrum Digital XDS100v2 is the second generation of the XDS100 family of debug probes (emulators) for TI processors. The XDS100 family features the lowest cost of all the XDS family of debug probes while supporting the traditional JTAG standard (IEEE1149.1). Also, all XDS debug probes support (...)
Features

The XDS100v2 is the second generation of the XDS100 family of low cost JTAG debug probes (emulators) for TI processors. Designed to deliver full featured JTAG connectivity at a low cost, the XDS100 is the family of choice for entry-level debugging of TI microcontrollers, processors and wireless (...)

DEBUG PROBES Download
XDS200 USB Debug Probe
TMDSEMU200-U The Spectrum Digital XDS200 is the first model of the XDS200 family of debug probes (emulators) for TI processors. The XDS200 family features a balance of low cost with good performance between the super low cost XDS110 and the high performance XDS560v2, while supporting a wide variety of standards (...)
295
Features

The XDS200 is the mid-range family of JTAG debug probes (emulators) for TI processors. Designed to deliver good performance and the most common features that place it between the low cost XDS110 and the high performance XDS560v2, the XDS200 is the balanced solution to debug TI microcontrollers (...)

DEBUG PROBES Download
XDS560v2 System Trace USB Debug Probe
TMDSEMU560V2STM-U The XDS560v2 System Trace is the first model of the XDS560v2 family of high-performance debug probes (emulators) for TI processors. The XDS560v2 is the highest performance of the XDS family of debug probes and supports both the traditional JTAG standard (IEEE1149.1) and cJTAG (IEEE1149.7).

The (...)

995
Features

XDS560v2 is the latest variant of the XDS560 family of high-performance debug probes (emulators) for TI processors. With the fastest speeds and most features of the entire XDS family, XDS560v2 is the most comprehensive solution to debug TI microcontrollers, processors and wireless connectivity (...)

DEBUG PROBES Download
XDS560v2 System Trace USB & Ethernet Debug Probe
TMDSEMU560V2STM-UE The XDS560v2 System Trace is the first model of the XDS560v2 family of high-performance debug probes (emulators) for TI processors. The XDS560v2 is the highest performance of the XDS family of debug probes and supports both the traditional JTAG standard (IEEE1149.1) and cJTAG (IEEE1149.7).

The (...)

1495
Features
  • XDS560v2 is the latest variant of the XDS560 family of high-performance debug probes (emulators) for TI processors. With the fastest speeds and most features of the entire XDS family, XDS560v2 is the most comprehensive solution to debug TI microcontrollers, processors and wireless connectivity (...)

DRIVERS & LIBRARIES Download
C2000 Digital Control Library
C2000-DIGITAL-CONTROL-LIBRARY — The C2000 Digital Control Library (DCL) provides a suite of robust software functions for developers of digital control applications using the Texas Instruments C2000 MCU platform. All the functions in the library are supplied in the form of C or assembly source code. Version 3.0 of the DCL contains (...)
Features
  • Supports all C28x CPUs
    • C28x fixed-point
    • C28x floating-point
    • CLA
  • 'OneMCU' compliant
  • Supports COFF & EABI compilers
  • Rigorously tested
  • Deployed in C2000Ware
DRIVERS & LIBRARIES Download
C2000 SafeTI™ Diagnostic Software Library
C2000-SAFETI-DIAGNOSTICS-LIB C2000 SafeTI diagnostic library advantage

The C2000 MCU Diagnostic Software package includes SafeTI™ software that helps make designing for functional safety applications with TI C2000™ real-time control microcontrollers (MCUs) easier and faster. The safety mechanisms employed are (...)

Features
  • Support for the following C2000 series
    • Delfino F2837xD
    • Delfino F2837xS
    • Piccolo F2807x
    • C28x CPU and Control Law Accelerator
  • Functional Safety Manual
  • Diagnostic Software or Self-Test Libraries
    • Source Code
    • User Guides
    • Code Examples Software
  • Documentation:
    • Design Documents and Unit Test Plans
    • Dynamic Analysis (...)
DRIVERS & LIBRARIES Download
controlSUITE™ Software Suite: Software and Development Tools for C2000™ Microcontrollers
CONTROLSUITE controlSUITE™ for C2000™ microcontrollers is a cohesive set of software infrastructure, tools, and documentation designed to minimize system development time. From device-specific drivers and support software to complete examples in sophisticated system applications, controlSUITE&trade (...)
Features
  • Centralized, interactive, software repository for C2000 real-time controllers
  • Graphical User Interface (GUI) for intuitive navigation of software, development kits, libraries, user guides, application notes, and more.
    • Auto-loading of Code Composer Studio example projects
  • Device software and support
    • (...)
DRIVERS & LIBRARIES Download
powerSUITE Digital Power Supply Software Frequency Response Analyzer Tool for C2000™ MCUs
SFRA The Software Frequency Response Analyzer (SFRA) is one of several tools included in the powerSUITE Digital Power Supply Design Software Tools for C2000™ Microcontrollers.  The SFRA includes a software library that enables developers to quickly measure the frequency response of their digital power (...)
Features
  • Easy-to-use software library functions for measuring system frequency response
  • PC-based GUI for viewing Bode plots of power supply control loops

 

 

 

IDES, CONFIGURATION, COMPILERS & DEBUGGERS Download
C2000 code generation tools - compiler
C2000-CGT — The TI C2000 C/C++ Compiler and Assembly Language Tools support development of applications for TI C2000 Microcontroller platforms, including the Concerto (F28M3xx), Piccolo (280xx), Delfino Floating-Point (283xx), and C2000 Fixed-Point (2823x/280x/281x) Microcontroller devices.
Features
  • Available in release 20.2.0.LTS:
    • Hex utility tool new option --cmac (cipher-based message authentication protocol) will apply cmac algorithm to user defined regions and generate cmac tags for secure boot support.
    • The Integer Division Unit (--idiv_support=idiv0) has performance, diagnostic, and build (...)
IDES, CONFIGURATION, COMPILERS & DEBUGGERS Download
Code Composer Studio (CCS) Integrated Development Environment (IDE)
CCSTUDIO

Code Composer Studio is an integrated development environment (IDE) that supports TI's Microcontroller and Embedded Processors portfolio. Code Composer Studio comprises a suite of tools used to develop and debug embedded applications. It includes an optimizing C/C++ compiler, source code editor (...)

IDES, CONFIGURATION, COMPILERS & DEBUGGERS Download
Code Composer Studio (CCS) Integrated Development Environment (IDE) for C2000 Microcontrollers
CCSTUDIO-C2000

Code Composer Studio is an integrated development environment (IDE) that supports TI's Microcontroller and Embedded Processors portfolio. Code Composer Studio comprises a suite of tools used to develop and debug embedded applications. It includes an optimizing C/C++ compiler, source code editor (...)

IDES, CONFIGURATION, COMPILERS & DEBUGGERS Download
Safety Compiler Qualification Kit
SAFETI_CQKIT The Safety Compiler Qualification Kit was developed to assist customers in qualifying their use of the TI ARM, C6000, C7000 or C2000/CLA C/C++ Compiler to functional safety standards such as IEC 61508 and ISO 26262.

The Safety Compiler Qualification Kit:

  • does not require the user to run qualification (...)
Features

The Safety Compiler Qualification Kit has been assessed by TÜV Nord to comply with both IEC 61508 and ISO 26262 and was developed in collaboration with by Validas, a consulting company that specializes in software tool qualification.

What's Included

Safety Compiler Qualification Kit includes: 

  • Safety (...)
IDES, CONFIGURATION, COMPILERS & DEBUGGERS Download
powerSUITE Digital Power Supply Solution Adapter Tool for C2000™ MCUs
SOLUTION_ADAPTER The Solution Adapter is one of several tools included in the powerSUITE Digital Power Supply Design Software Tools for C2000™ Microcontrollers.  The Solution Adapter allows you to modify existing code examples from TI digital power kits and configure them to run on a custom digital power (...)
Features
  • Graphical tool for creating digital control loop source code

Design tools & simulation

SIMULATION MODELS Download
SPRM639A.ZIP (441 KB) - IBIS Model
SIMULATION MODELS Download
SPRM640A.ZIP (438 KB) - IBIS Model
SIMULATION MODELS Download
SPRM641A.ZIP (260 KB) - IBIS Model
SIMULATION MODELS Download
SPRM646A.ZIP (5 KB) - BSDL Model
SIMULATION MODELS Download
SPRM647A.ZIP (4 KB) - BSDL Model
SIMULATION MODELS Download
SPRM678A.ZIP (3 KB) - BSDL Model
CALCULATION TOOLS Download
Pin mux tool
PINMUXTOOL The PinMux Utility is a software tool which provides a Graphical User Interface for configuring pin multiplexing settings, resolving conflicts and specifying I/O cell characteristics for TI MPUs. Results are output as C header/code files that can be imported into software development kits (SDKs) or (...)

Reference designs

REFERENCE DESIGNS Download
Isolated Current Shunt and Voltage Measurement Reference Design for Motor Drives
TIDA-00171 This evaluation kit and reference design implements the AMC130x reinforced isolated delta-sigma modulators along with integrated Sinc filters in the C2000™ TMS320F28377D Delfino™ microcontroller. The design provides an ability to evaluate the  performance of these measurements: three motor (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Differential Signal Conditioning Circuit for Current and Voltage Measurement Using Fluxgate Sensors
TIDA-00201 This design provides a 4-channel signal conditioning solution for differential ADCs integrated into a microcontroller measuring motor current using fluxgate sensors. Also provided is an alternative measurement circuit with external differential SAR ADCs as well as circuits for high-speed overcurrent (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Industrial Servo Drive and AC Inverter Drive Reference Design
TIDM-SERVODRIVE The DesignDRIVE Development Kit is a reference design for a complete industrial drive directly connecting to a three phase ACI or PMSM motor. Many drive topologies can be created from the combined control, power and communications technologies included on this single platform.  Includes (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Isolated, Shunt-Based Current Sensing Reference Design
TIPD165 This Verified TI Design implements an isolated current sensing data acqusition solution based on the AMC1304M25 isolated delta-sigma (ΔΣ) modulator and a TMS320F28377D microcontroller.  This circuit was designed for shunt-based current measurement applications which require excellent galvanic (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Isolated delta-sigma modulator based AC/DC voltage and current measurement module reference design
TIDA-00080 This isolated shunt based current measurement unit enables high accuracy current measurement without the use of Current Transformers (CT). The isolation is achieved through the use of AMC1304 that incorporates both high voltage isolation as well as the Delta-Sigma Modulator. This solution eliminates (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Monitoring Voltage Rails on Delfino with TPS3702 Reference Design
TIDA-00392 The C2000 Delfino microcontrollers' demand for a tight tolerance on both of its supply rails; this supervisory topology is designed to monitor the two voltage rails and assert a reset when either rail is not within its threshold. The two supervisors will monitor for both undervoltage and overvoltage (...)
document-generic Schematic document-generic User guide

CAD/CAE symbols

Package Pins Download
HLQFP (PTP) 176 View options
HTQFP (PZP) 100 View options
NFBGA (ZWT) 337 View options

Ordering & quality

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos