The TLV755P is an ultra-small, low quiescent current, low-dropout regulator (LDO) that sources 500mA with good line and load transient performance. The TLV755P is optimized for a wide variety of applications by supporting an input voltage range from 1.45V to 5.5V. To minimize cost and solution size, the device is offered in fixed output voltages ranging from 0.6V to 5V to support the lower core voltages of modern microcontrollers (MCUs). Additionally, the TLV755P has a low IQ with enable functionality to minimize standby power. This device features an internal soft-start to lower inrush current, thus providing a controlled voltage to the load and minimizing the input voltage drop during start up. When shutdown, the device actively pulls down the output to quickly discharge the outputs and provide a known start-up state.
The TLV755P is stable with small ceramic output capacitors allowing for a small overall solution size. A precision band-gap and error amplifier provides a typical accuracy of 1%. All device versions have integrated thermal shutdown, current limit, and undervoltage lockout (UVLO). The TLV755P has an internal foldback current limit that helps reduce the thermal dissipation during short-circuit events.
The TLV755 is available in the popular WSON, X2SON, and SOT23-5 (DRV, DQN, and DBV) packages. This device is also available in a thermally enhanced SOT23-5 (DYD) package with a thermal pad that provides significantly reduced thermal resistance compared to a standard SOT23-5 package.
| Tipo | Título | Fecha | ||
|---|---|---|---|---|
| * | Data sheet | TLV755P 500mA, Low-IQ , Small-Size, Low-Dropout Regulator datasheet (Rev. C) | PDF | HTML | 13 mar 2024 |
| Application note | An empirical analysis of the impact of board layout on LDO thermal performance | 22 feb 2019 |
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
The MULTIPKGLDOEVM-823 evaluation module (EVM) helps you evaluate the operation and performance of several common packages of linear regulators for possible use in circuit applications. This particular EVM configuration has a DRB, DRV, DQN and DBV footprint for you to solder and (...)
El módulo de evaluación (EVM) USB-PD-CHG-EVM-01 se utiliza para evaluar conjuntamente el dispositivo BQ25798 y el TPS25750. El BQ25798 es un dispositivo integrado de gestión de carga de baterías reductoras-impulsoras conmutado en un encapsulado HOTROD (QFN), diseñado para entre 1 y 4 baterías de (...)
The hardware design consists of DDR3L SDRAM (2x512MB), 64MB Serial NOR Flash, 8GB eMMC 5.0 iNAND, SD Card interface v3.0, 50 pin LCD Connector for external TFT display (...)
| Paquete | Pasadores | Descargar |
|---|---|---|
| SOT-23 (DBV) | 5 | Ver opciones |
| SOT-23 (DYD) | 5 | Ver opciones |
| WSON (DRV) | 6 | Ver opciones |
| X2SON (DQN) | 4 | Ver opciones |
Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.