홈 배터리 관리 IC 배터리 충전기 IC
홈
배터리 관리 IC
배터리 충전기 IC
신규

BQ25692-Q1

미리 보기

차량용 독립 실행형 또는 I2C 제어형 양방향 iFET 벅-부스트 배터리 충전기

지금 주문하기
데이터 시트

BQ25692-Q1

미리 보기
데이터 시트 지금 주문하기

제품 상세 정보

Rating Automotive Number of series cells 1, 2, 3, 4, 5, 6, 7 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4, SuperCap Charge current (max) (A) 3 Features AEC-Q100 Automotive Qual, BAT temp thermistor monitoring (JEITA profile), BAT temp thermistor monitoring (hot/cold profile), IC thermal regulation, IINDPM (Input current limit), Input OVP, USB C/PD compatible, USB OTG integrated, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 2.9 Vin (max) (V) 45 Absolute max Vin (max) (V) 45 Control topology Switch-Mode Buck-boost Battery charge voltage (min) (V) 0 Battery charge voltage (max) (V) 33 Control interface I2C, Standalone (RC-Settable) Operating temperature range (°C) -40 to 125
Rating Automotive Number of series cells 1, 2, 3, 4, 5, 6, 7 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4, SuperCap Charge current (max) (A) 3 Features AEC-Q100 Automotive Qual, BAT temp thermistor monitoring (JEITA profile), BAT temp thermistor monitoring (hot/cold profile), IC thermal regulation, IINDPM (Input current limit), Input OVP, USB C/PD compatible, USB OTG integrated, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 2.9 Vin (max) (V) 45 Absolute max Vin (max) (V) 45 Control topology Switch-Mode Buck-boost Battery charge voltage (min) (V) 0 Battery charge voltage (max) (V) 33 Control interface I2C, Standalone (RC-Settable) Operating temperature range (°C) -40 to 125
WQFN-HR (RBA) 26 14 mm² (3.5 mm × 4 mm)
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C ≤ TA ≤ 125°C
  • High integration buck-boost forward (sink) mode charger for 1- to 7cell Li-Ion batteries supporting USB PD profile with integrated switching MOSFETs and loop compensation
  • Highly efficient
    • Programmable switching frequency from 450kHz to 2.2MHz
    • Bypass mode for >98.0% efficiency USB-PD PPS direct battery charging at 20V, 3A
    • 96.0% efficient: 19V battery at 3A from 20V
    • 95.2% converter efficiency charging 15.2V battery at 3A from 20V
    • Selectable PFM with out-of-audio (OOA) operation for light load efficiency improvement
  • Supports a wide range of input sources with 2.5V to 34V operating range and 45V absolute maximum rating
    • Support VIN down to 2.5V with SRN > 3.2V
    • USB-PD input
    • Input voltage dynamic power management (VINDPM) up to 34V to avoid input crashing
    • Optional input current dynamic power management (IINDPM) up-to 3.3A for maximum power limit
  • I2C controlled for excellent system performance with resistor-programmable option
    • Hardware selectable default cell count, charge voltage, input and charge current limits
    • 3.3A charging current with 20mA resolution
  • Reverse/OTG (source) mode powers input port from battery
    • 3.5V to 34V reverse output voltage with 20mV resolution to support USB-PD PPS
    • Up to 3.3A reverse output current regulation with 20mA resolution to support USB-PD PPS
  • Low quiescent current
    • 6.5µA for battery only operation
    • 700µA for converter switching operation
  • High accuracy
    • ±0.5% charge voltage regulation
    • ±5% input and output current regulation
  • Safety
    • Input and battery OVP
    • Thermal regulation and thermal shutdown
    • Converter MOSFETs OCP
    • Charging safety timer
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C ≤ TA ≤ 125°C
  • High integration buck-boost forward (sink) mode charger for 1- to 7cell Li-Ion batteries supporting USB PD profile with integrated switching MOSFETs and loop compensation
  • Highly efficient
    • Programmable switching frequency from 450kHz to 2.2MHz
    • Bypass mode for >98.0% efficiency USB-PD PPS direct battery charging at 20V, 3A
    • 96.0% efficient: 19V battery at 3A from 20V
    • 95.2% converter efficiency charging 15.2V battery at 3A from 20V
    • Selectable PFM with out-of-audio (OOA) operation for light load efficiency improvement
  • Supports a wide range of input sources with 2.5V to 34V operating range and 45V absolute maximum rating
    • Support VIN down to 2.5V with SRN > 3.2V
    • USB-PD input
    • Input voltage dynamic power management (VINDPM) up to 34V to avoid input crashing
    • Optional input current dynamic power management (IINDPM) up-to 3.3A for maximum power limit
  • I2C controlled for excellent system performance with resistor-programmable option
    • Hardware selectable default cell count, charge voltage, input and charge current limits
    • 3.3A charging current with 20mA resolution
  • Reverse/OTG (source) mode powers input port from battery
    • 3.5V to 34V reverse output voltage with 20mV resolution to support USB-PD PPS
    • Up to 3.3A reverse output current regulation with 20mA resolution to support USB-PD PPS
  • Low quiescent current
    • 6.5µA for battery only operation
    • 700µA for converter switching operation
  • High accuracy
    • ±0.5% charge voltage regulation
    • ±5% input and output current regulation
  • Safety
    • Input and battery OVP
    • Thermal regulation and thermal shutdown
    • Converter MOSFETs OCP
    • Charging safety timer

The BQ25692-Q1 is a fully-integrated, switch-mode buck-boost charger for 1 cell to 7 cell Li-ion or Li-polymer batteries. The wide input voltage range from 2.5V to 34V supports applications powered from batteries, standard USB-PD adapters, and high voltage dedicated DC adapters. The device integrates four switching MOSFETs (Q1, Q2, Q3, Q4) and all the loop compensation of the buck-boost converter for small design size with simple design. The device also supports the full input (sink) and output (reverse or source mode) voltage ranges for USB Type-C and USB power delivery (USB-PD) applications.

The BQ25692-Q1 is a fully-integrated, switch-mode buck-boost charger for 1 cell to 7 cell Li-ion or Li-polymer batteries. The wide input voltage range from 2.5V to 34V supports applications powered from batteries, standard USB-PD adapters, and high voltage dedicated DC adapters. The device integrates four switching MOSFETs (Q1, Q2, Q3, Q4) and all the loop compensation of the buck-boost converter for small design size with simple design. The device also supports the full input (sink) and output (reverse or source mode) voltage ranges for USB Type-C and USB power delivery (USB-PD) applications.
filter 기타 배터리 충전기 IC 찾기
다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
2개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 BQ25692-Q1: Automotive, Standalone/I2 C Controlled, 34V, 1-7 Cell Li-Ion, 3.3A Buck-Boost Bidirectional Battery Charger With USB-PD 3.0 OTG Output datasheet (Rev. A) PDF | HTML 2026. 8. 26
인증서 BQ25692-Q1EVM EU Declaration of Conformity (DoC) 2025. 10. 9

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

계산 툴

BQ2569X-DESIGN-CALC — BQ2569X design spreadsheet

Excel spreadsheet to help with BQ2569X battery charger designs
지원되는 제품 및 하드웨어
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
WQFN-HR (RBA) 26 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상