DS22EV5110
리타이머 및 출력 디엠퍼시스 기능을 지원하는 DVI, HDMI 확장 리치 이퀄라이저
DS22EV5110
- Optimized for HDMI/DVI Source and Repeater Applications
- TMDS Compatible Inputs with Configurable Receive Equalization Supporting Data Rates up to 2.25 Gbps
- TMDS Compatible Outputs with Configurable Transmit De-Emphasis
- Dedicated CDR on Each Data Channel Reduces Jitter Transfer
- Resistor Adjustable Differential Output Voltage for AC Coupled Cat5e and Cat6 Extension Applications
- 2 Equalizer Settings for a Wide Range of Cable Reaches up to 2.25 Gbps
- Total Output Jitter of 0.09 UI at 2.25 Gbps
- DVI 1.0 and HDMI v1.3a Compatible TMDS Source and Sink Interface
- 7 mm x 7 mm 48 Pin WQFN Package
- >8 kV HBM ESD Protection
- 0 °C to +70 °C Operating Temperature
The DS22EV5110 is a 6.75 Gbps (3 x 2.25 Gbps) extended reach equalizer optimized for DVI™ and HDMI™ cable extension applications with a high performance re-clocking feature. It supports 3 Transition Minimized Differential Signaling (TMDS) data channels and a single clock channel over DVI™ v1.0, and HDMI™ v1.3a data rates up to 2.25 Gbps for each data channel. The device incorporates a configurable receive equalizer, a clock and data recovery (CDR) circuit and a de-emphasis driver on each data channel over DVI v1.0, and HDMI v1.3a data rates up to 2.25 Gbps for each data channel. The device incorporates a configurable receive equalizer with a clock and data recovery (CDR) circuit on each data channel. The clock channel feeds a high-performance phase locked loop (PLL) that regenerates a low jitter output clock for data recovery, enabling the extended reach of driving capability feature for repeater application.
The DS22EV5110 equalizes greater than 25 meters 28 AWG of HDMI cable, enabling 1080p resolution with 12 bit deep color depth (2.25 Gbps), to a low jitter version of the clock and data signal outputs, reducing both deterministic and random jitter. Obtaining total jitter is 0.09 UI or less over the supported data rates. This extremely low level of output jitter provides system designers with extra margin and flexibility when working with stringent timing budgets. It is ideal for the DVI and HDMI source and repeater applications.
The transmitter supports configurable transmit de-emphasis so the output can be optimized for driving additional lengths of cables or FR4 traces.
기술 문서
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | DVI, HDMI Extended Reach Equalizer with Retimer and Output De-Emphasis datasheet (Rev. E) | 2013/04/15 | |
Application note | Using DS34RT5110 HDMI Cable Equalizer for 4K Resolution | 2015/01/14 | ||
User guide | DS22EV5110-EVKC: CAT5 Extender Demo Kit for HDMI Cables (Rev. A) | 2013/10/31 | ||
Application note | Extend HDMI Cable Reach Using DS16EV5110A, DS22EV5110, & DS34RT5110 Equalizers (Rev. B) | 2013/04/26 | ||
User guide | DS22EV5110-EVKH: HDMI Extender Demo Kit for HDMI Cables | 2012/01/25 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
패키지 | 핀 | 다운로드 |
---|---|---|
WQFN (RHS) | 48 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치