LM27761
- Inverts and Regulates the Input Supply Voltage
- Low Output Ripple
- Shutdown Lowers Quiescent Current to 7 µA (Typical)
- Up to 250-mA Output Current
- 2.5-Ω Inverter Output Impedance, VIN = 5 V
- ±4% Regulation at Peak Load
- 370-µA Quiescent Current
- 2-MHz (Typical) Low-Noise Fixed-Frequency Operation
- 35-dB (Typical) LDO PSRR at 2 MHz
With 80-mA Load Current - 30-mV LDO Dropout Voltage at 100 mA,
VOUT = –5 V - Current Limit and Thermal Protection
- Create a Custom Design Using the LM27761 With the WEBENCH® Power Designer
The LM27761 low-noise regulated switched-capacitor voltage inverter delivers a very low-noise adjustable output for an input voltage in the range of 2.7 V to 5.5 V. Four low-cost capacitors are used in the application solution to provide up to 250 mA of output current. The regulated output for the device is adjustable between −1.5 V and −5 V. The LM27761 operates at 2-MHz (typical) switching frequency to reduce output resistance and voltage ripple. With an operating current of only 370 µA (charge-pump power efficiency greater than 80% with most loads) and 7-µA typical shutdown current, the LM27761 provides ideal performance when driving power amplifiers, DAC bias rails, and other high-current, low-noise voltage applications.
기술 문서
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | LM27761 Low-Noise, Regulated, Switched-Capacitor Voltage Inverter datasheet (Rev. C) | PDF | HTML | 2017/01/25 |
Application note | Quick Reference Guide To TI Buck Switching DC/DC Application Notes (Rev. B) | PDF | HTML | 2022/05/23 | |
Technical article | Low-noise charge pumps make it easy to create negative voltages | PDF | HTML | 2017/08/30 | |
Technical article | The top three ways to split a voltage rail to a bipolar supply | PDF | HTML | 2016/12/27 | |
Technical article | Pump it up quietly | PDF | HTML | 2016/02/19 | |
EVM User's guide | Using the LM27761EVM Evaluation Module | 2015/12/04 | ||
White paper | The Forgotten Converter | 2015/06/15 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DAC38RF80EVM — DAC38RF80 듀얼 채널, 14비트, 9GSPS, 6x-24x 보간, 6 & 9GHz PLL DAC 평가 모듈
The DAC38RF80EVM is the circuit board for evaluating DAC38RF80/84/90 digital-to-analog converters (DACs). The EVM can be used to evaluate the performance of the DAC up to 9-GSPS sampling rate. It is designed to work with the FPGA-based pattern generator card TSW14J56EVM (Rev B and up). The (...)
DAC38RF82EVM — DAC38RF82 듀얼 채널, 14비트, 9GSPS, 1x-24x 보간, 6 & 9GHz PLL DAC 평가 모듈
DAC38RF89EVM — DAC38RF89 듀얼 채널, 14비트, 8.4GSPS, 1x-24x 보간, 5 & 7.5GHz PLL DAC 평가 모듈
The DAC38RF89 evaluation module (EVM) is the circuit board for evaluating DAC38RF89 digital-to-analog converters (DACs). The DAC38RFEVM can be used to evaluate the performance of the DAC up to 9-GSPS sampling rate and is designed to work with the TSW14J56EVM (Rev B and up). The available FMC (...)
LM27761EVM — LM27761 레귤레이션된 충전 펌프 인버터 평가 모듈
The LM27761EVM aids in evaluation of the LM27761 Regulated Charge Pump Inverter. The 2MHz switched capacitor boost provides up to 250 mA of output current utilizing few external components. With a low current PFM or ECO mode, the LM27761 draws a minimal load from the power supply when (...)
LM27761 Unencrypted PSpice Transient Model Package (Rev. A)
TIDA-01215 — RF 샘플링 DAC에서 스퍼 및 위상 잡음 최적화를 위한 전원 공급 장치 레퍼런스 디자인
TIDA-01240 — RF 샘플링 S 대역 레이더 트랜스미터 레퍼런스 디자인
TIDA-01435 — 마이크로파 백홀을 위한 광대역 제로 IF 레퍼런스 디자인
TIDA-01084 — 연속 파형 위상 정렬 다중 톤 생성기: DC-6GHz RF 샘플링 DAC 레퍼런스 디자인
This (...)
패키지 | 핀 | 다운로드 |
---|---|---|
WSON (DSG) | 8 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치