전력 관리 DC/DC 전력 모듈 벅 모듈(통합 인덕터)

LMZM33606

활성

3.5V~36V 입력, 1V~20V 출력, 6A 전원 모듈

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
TLVM13660 활성 5mm x 5.5mm 향상된 HotRod™ QFN의 고밀도 36V 입력, 1V~6V 출력, 6A 전원 모듈 Basic feature set
TPSM63606 활성 5mm x 5.5mm 향상된 HotRod™ QFN의 고밀도 36V 입력, 1V~16V 출력, 6A 전원 모듈 Significantly smaller footprint, lower EMI, higher efficiency, and optional spread spectrum.

제품 상세 정보

Rating Catalog Topology Buck, Inverting Buck-Boost, Synchronous Buck Iout (max) (A) 6 Vin (max) (V) 36 Vin (min) (V) 3.5 Vout (max) (V) 20 Vout (min) (V) 1 Features EMI Tested, Enable, Frequency synchronization, Light Load Efficiency, Power good, Tracking Operating temperature range (°C) -40 to 105 Type Module Duty cycle (max) (%) 90 Control mode current mode Switching frequency (min) (kHz) 350 Switching frequency (max) (kHz) 2200
Rating Catalog Topology Buck, Inverting Buck-Boost, Synchronous Buck Iout (max) (A) 6 Vin (max) (V) 36 Vin (min) (V) 3.5 Vout (max) (V) 20 Vout (min) (V) 1 Features EMI Tested, Enable, Frequency synchronization, Light Load Efficiency, Power good, Tracking Operating temperature range (°C) -40 to 105 Type Module Duty cycle (max) (%) 90 Control mode current mode Switching frequency (min) (kHz) 350 Switching frequency (max) (kHz) 2200
B3QFN (RLX) 41 160 mm² (16 mm × 10 mm)
  • Small Complete Solution Size: < 250 mm2
    • Requires as few as 4 External Components
    • 16 mm × 10 mm × 4 mm QFN Package
  • Supports 5-V, 12-V, 24-V, 28-V Input Rails
    • 1-V to 20-V Output Voltage Range
    • Pin Compatible with 4-A LMZM33604
  • Meets EN55011 Radiated Emissions
  • Configurable as Negative Output Voltage
  • Adjustable Features for Design Flexibility
    • Switching Frequency (350 kHz to 2.2 MHz)
    • Synchronization to an External Clock
    • Selectable Auto Mode or FPWM Mode
      • Auto: Boost Efficiency at Light Loads
      • FPWM: Fixed Frequency Over Entire Load
    • Adjustable Soft Start and Tracking Input
    • Precision Enable to Program System UVLO
  • Protection Features
    • Hiccup Mode Current Limit
    • Overtemperature Protection
    • Power-Good Output
  • Operate in Rugged Environments
    • Up to 50-W Output Power at 85°C, No Airflow
    • Operating Junction Range: –40°C to +125°C
    • Operating Ambient Range: –40°C to +105°C
    • Shock and Vibration Tested to Mil-STD-883D
  • Small Complete Solution Size: < 250 mm2
    • Requires as few as 4 External Components
    • 16 mm × 10 mm × 4 mm QFN Package
  • Supports 5-V, 12-V, 24-V, 28-V Input Rails
    • 1-V to 20-V Output Voltage Range
    • Pin Compatible with 4-A LMZM33604
  • Meets EN55011 Radiated Emissions
  • Configurable as Negative Output Voltage
  • Adjustable Features for Design Flexibility
    • Switching Frequency (350 kHz to 2.2 MHz)
    • Synchronization to an External Clock
    • Selectable Auto Mode or FPWM Mode
      • Auto: Boost Efficiency at Light Loads
      • FPWM: Fixed Frequency Over Entire Load
    • Adjustable Soft Start and Tracking Input
    • Precision Enable to Program System UVLO
  • Protection Features
    • Hiccup Mode Current Limit
    • Overtemperature Protection
    • Power-Good Output
  • Operate in Rugged Environments
    • Up to 50-W Output Power at 85°C, No Airflow
    • Operating Junction Range: –40°C to +125°C
    • Operating Ambient Range: –40°C to +105°C
    • Shock and Vibration Tested to Mil-STD-883D

The LMZM33606 power module is an easy-to-use integrated power solution that combines a 6-A DC/DC converter with power MOSFETs, a shielded inductor, and passives in a low-profile package. This power solution requires as few as four external components and eliminates the loop compensation and inductor part selection from the design process.

The 16 mm × 10 mm × 4 mm, 41-pin, QFN package is easy to solder onto a printed circuit board and allows a compact, low-profile point-of-load design. The LMZM33606 feature set includes power good, adjustable soft start, tracking, synchronization, programmable UVLO, prebias start-up, selectable auto or FPWM modes, as well as over-current and over-temperature protection. The LMZM33606 can be configured as negative output voltage for inverting applications.

The LMZM33606 power module is an easy-to-use integrated power solution that combines a 6-A DC/DC converter with power MOSFETs, a shielded inductor, and passives in a low-profile package. This power solution requires as few as four external components and eliminates the loop compensation and inductor part selection from the design process.

The 16 mm × 10 mm × 4 mm, 41-pin, QFN package is easy to solder onto a printed circuit board and allows a compact, low-profile point-of-load design. The LMZM33606 feature set includes power good, adjustable soft start, tracking, synchronization, programmable UVLO, prebias start-up, selectable auto or FPWM modes, as well as over-current and over-temperature protection. The LMZM33606 can be configured as negative output voltage for inverting applications.

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
8개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 LMZM33606 3.5-V to 36-V Input, 1-V to 20-V Output, 6-A Power Module datasheet (Rev. B) PDF | HTML 2019. 5. 24
애플리케이션 노트 Soldering Considerations for Power Modules (Rev. C) PDF | HTML 2024. 3. 14
애플리케이션 노트 Step-Dwn (Buck) Convrtr Pwer Solutions for Programmable Logic Controller Systems (Rev. A) PDF | HTML 2021. 7. 26
애플리케이션 노트 Practical Thermal Design With DC/DC Power Modules (Rev. A) 2019. 11. 20
애플리케이션 노트 Inverting Application Using the LMZM33606 (Rev. B) 2019. 5. 17
애플리케이션 노트 Output Noise Filtering for DC/DC Power Modules 2019. 3. 5
백서 Power modules for lab instrumentation 2018. 10. 18
기술 문서 How to create a programmable output inverting buck-boost regulator PDF | HTML 2018. 10. 17

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

LMZM33606EVM — 3.5V~36V 입력, 1V~20V 출력, 6A 전원 모듈 평가 보드

LMZM33606 평가 보드는 최대 6A의 전류에서 LMZM33606 전원 모듈의 작동을 평가하도록 구성되었습니다. 입력 전압 범위는 3.5V~36V입니다. 출력 전압 범위는 1V~20V입니다. 이 평가 보드를 사용하면 LMZM33606 작동을 쉽게 평가할 수 있습니다.
사용 설명서: PDF
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
시뮬레이션 모델

LMZM33606 PSpice Transient Model (Rev. A)

SNVMBK2A.ZIP (114 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

LMZM33606 Unencrypted PSpice Transient Model (Rev. A)

SNVMBK3A.ZIP (8 KB) - PSpice 모델
지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
B3QFN (RLX) 41 Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

비디오 시리즈

모든 비디오 보기

동영상