OPA2365
- Gain bandwidth: 50 MHz
- Zerø-crossover distortion topology:
- Excellent THD+N: 0.0004%
- CMRR: 100 dB (minimum)
- Rail-to-rail input and
output
- Input 100 mV beyond supply rail
- Low noise: 4.5 nV/√ Hz at 100 kHz
- Slew rate: 25 V/µs
- Fast settling: 0.3 µs to 0.01%
- Precision:
- Low offset: 100 µV
- Low input bias current: 0.2 pA
- 2.2-V to 5.5-V operation
The OPA365 and OPA2365 (OPAx365) zerø-crossover series, rail-to-rail, high-performance, CMOS operational amplifiers are optimized for very low voltage, single-supply applications. Rail-to-rail input or output, low-noise (4.5 nV/√ Hz), and high-speed operation (50-MHz gain bandwidth) make these devices an excellent choice for driving sampling analog-to-digital converters (ADCs). Applications include audio, signal conditioning, and sensor amplification.
Special features include an excellent common-mode rejection ratio (CMRR), no input stage crossover distortion, high input impedance, and rail-to-rail input and output swing. The input common-mode range includes both the negative and positive supplies. The output voltage swing is within 10 mV of the rails.
The OPA365 (single version) is available in the micro-size SOT23-5 (SOT-5) and SOIC-8 packages. The OPA2365 (dual version) is offered in the SOIC-8 package. All versions are specified for operation from −40°C to +125°C. Single and dual versions have identical specifications for maximum design flexibility.
TI.com 재고에서 유사한 제품 확인
유사한 사양 제품, 주문 가능한 TI.com 재고별로 정렬. 지금 보기
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | OPAx365 50-MHz, Zerø-Crossover, Low-Distortion, High-CMRR, RRI/O, Single-Supply Operational Amplifiers datasheet (Rev. G) | PDF | HTML | 2023. 5. 17 | |
| Circuit design | PWM generator circuit (Rev. B) | PDF | HTML | 2024. 10. 16 | ||
| Application brief | Increase Measurement Accuracy With HS Amps for Low-Side Shunt Current Monitoring (Rev. A) | 2019. 8. 26 | |||
| e북 | The Signal e-book: A compendium of blog posts on op amp design topics | PDF | HTML | 2017. 3. 28 | ||
| 기술 문서 | Designing an EMC-compliant interface to motor position encoders – Part 5 | PDF | HTML | 2015. 11. 10 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
BOOSTXL-POSMGR — C2000 DesignDRIVE 위치 관리자 BoosterPack™ 플러그 인 모듈
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
CIRCUIT060010 — PWM 생성기 회로
SBOC502 — Simulation for PWM Generator Circuit
TIDA-00176 — 고분해능 위치 보간을 지원하는 Sin/Cos 인코더 인터페이스 레퍼런스 디자인
TIDA-00176 레퍼런스 설계는 Sin/Cos 위치 인코더에 대한 EMC 준수 산업용 인터페이스입니다. 애플리케이션에는 정확한 속도 및 위치 제어가 필요한 산업용 드라이브가 포함되어 있습니다.
이 설계는 드롭인 호환 14 또는 12비트 버전과 16비트 듀얼 샘플 ADC를 활용하여 성능과 비용을 최적화할 수 있습니다. TIDA-00176은 또한 SPI 및 QEP 인터페이스를 사용하는 외부 프로세서에 간편하게 연결할 수 있으며, 선택적 임베디드 ADC를 사용할 수 있습니다. 빠른 평가를 위해 Piccolo F28069M MCU (...)
TIDA-00202 — HIPERFACE 위치 인코더 인터페이스 레퍼런스 디자인
TIDA-00202 레퍼런스 설계는 HIPERFACE 위치 인코더에 대한 EMC 규격 준수 산업용 하이브리드 아날로그 및 디지털 인터페이스입니다. IEC-ESD 및 IEC-EFT 보호를 지원하는 3.3V 전원 RS485 트랜시버는 양방향 매개 변수 채널에 사용됩니다. 아날로그 sin/cos 신호 채널의 경우 두 가지 옵션이 제공되므로 두 가지 옵션을 동시에 사용하여 임베디드 ADC 또는 이중화 유무에 관계없이 프로세서에 자유롭게 연결할 수 있습니다. 첫 번째 옵션은 SPI 출력을 지원하는 완전 차동 이중 12비트 ADC가 (...)
TIPD108 — 아날로그 PWM 생성기 5V, 500kHz PWM 출력
This verified design uses a triangle wave generator and comparator to generate a pulse-width-modulated (PWM) waveform with a duty cycle that is inversely proportional to the input voltage. An op amp and comparator generate a triangular waveform which is passed to one input of a comparator. By (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |