계산 툴
데이터시트
TPS54061
- Integrated High-Side and Low-Side MOSFET
- Diode Emulation for Improved Light Load
Efficiency - Peak Current Mode Control
- 90-µA Operating Quiescent Current
- 1.4-µA Shutdown Supply Current
- 50-kHz to 1100-kHz Adjustable Switching
Frequency - Synchronizes to External Clock
- Internal Slow-Start
- 0.8 V ±1% Voltage Reference
- Stable With Ceramic Output Capacitors or Low-
Cost Aluminum Electrolytic - Cycle-by-Cycle Current Limit, Thermal, OVP and
Frequency Foldback Protection - VSON-8 Package, 3 mm × 3 mm With Thermal
Pad - –40°C to 150°C Operating Junction Temperature
The TPS54061 device is a 60-V, 200-mA, synchronous step-down DC-DC converter with integrated high-side and low-side MOSFETs. Current mode control provides simple external compensation and flexible component selection. The non-switching supply current is 90 µA. Using the enable pin, shutdown supply current is reduced to 1.4 µA.
To increase light load efficiency the low-side MOSFET emulates a diode when the inductor current reaches zero.
Under voltage lockout is internally set at 4.5 V, but can be increased using two resistors on the enable pin. The output voltage startup ramp is controlled by the internal slow-start time.
The adjustable switching frequency range allows efficiency and external component size to be optimized. Frequency foldback and thermal shutdown protects the part during an overload condition.
The TPS54061 enables small designs by integrating the MOSFETs, boot recharge diode, and minimizing the IC footprint with a small 3.00 mm × 3.00 mm thermally enhanced VSON package.
The TPS54061 is supported in the WEBENCH™ Designer at www.ti.com.
기술 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기6 | 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPS54061 Wide Input 60-V, 200-mA Synchronous Step-Down DC-DC Converter With Low IQ datasheet (Rev. E) | PDF | HTML | 2015/11/04 |
| Selection guide | Buck Converter Quick Reference Guide (Rev. B) | 2021/04/08 | ||
| Selection guide | Power Management Guide 2018 (Rev. R) | 2018/06/25 | ||
| Analog Design Journal | Linear versus switching regulators in industrial applications with a 24-V bus | 2013/07/25 | ||
| Application note | Using the TPS54061 to Create an Inverting Power Supply | 2012/07/17 | ||
| EVM User's guide | Evaluation Module for TPS54061 Synchronous Step-Down SWIFT Converter | 2012/04/12 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
평가 보드
TPS54061EVM-142 — TPS54061 평가 모듈
The Texas Instruments TPS54061EVM-142 evaluation module (EVM) helps designers evaluate the performance of the TPS54061 Synchronous Step-Down SWIFT™ Converter. The EVM operates from an 8V to 60V input (24V nominal) and provides a 3.3V output at 200mA.
사용 설명서: PDF
계산 툴
SLVC439 — Synchronous Inverting Buck Boost Design Calculator
레퍼런스 디자인
TIDA-00179 — 절대 위치 인코더에 대한 범용 디지털 인터페이스 레퍼런스 디자인
TIDA-00179 is an EMC-compliant universal digital interface to connect to absolute position encoders like EnDat 2.2, BiSS®, SSI or HIPERFACE DSL®. This reference design supports a wide-input voltage range from 15 V to 60 V (24-V nom). A connector with 3.3-V logic I/O signals allows for (...)
레퍼런스 디자인
TIDA-00774 — 18V/1kW, 160A 피크, 98% 이상의 효율성, 높은 전력 밀도 브러시리스 모터 드라이브 레퍼런스 디자인
The TIDA-00774 is a 1kW drive for a three-phase brushless DC (BLDC) motor in power tools operating from a 5-cell Li-ion battery with a voltage up to 21 V. The design is a 65mm x 60mm compact drive, implementing sensor-based trapezoidal control. The design takes advantage of TI's MOSFET Power Block (...)
레퍼런스 디자인
PMP10977 — 4~20mA 루프 센서 절연 전원 공급 장치
The TPS54061 is used in a buck topology with an auxillary winding providing power to the primary side and isolated side of a isolated system. The high efficiency of this topology provides more output current from a system powered from a current limited input source. The isolated output is post (...)
레퍼런스 디자인
TIDA-00436 — 응답 시간이 <1us인 스톨 전류 제한이 있는 36V/1kW 브러시리스 DC 모터 드라이브 레퍼런스 디자인
This reference design is a power stage for brushless motors in battery-powered garden and power tools rated up to 1 kW, operating from a 10-cell lithium-ion battery with a voltage range from 36 to 42 V. The design uses 60V, N-channel NexFETsTM featuring a very low drain-to-source resistance (RDS_ON (...)
레퍼런스 디자인
PMP10182 — 넓은 입력 오토모티브 벅 레퍼런스 디자인
This automotive reference design has an input voltage range of 10V to 45V and provides an output voltage of 9.0V @ 150mA. It's using only ceramic capacitors on the output as well as on the input which enables the use for a wide temperature range.
레퍼런스 디자인
PMP9535 — 36-57Vin 5.4Vout 150mA, TPS54061 기능을 사용하여 저부하 효율성 텔레콤 전압 레퍼런스 디자인
This design uses a synchronous buck converter to provide light load efficiency with predictable ripple off "Telecom" voltage range. This approach is described in the TPS54061 datasheet from page 23 onwards. A low fixed frequency of 50kHz with operation in the discontinuous mode at all, but the (...)
Test report: PDF
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| VSON (DRB) | 8 | 옵션 보기 |
주문 및 품질
포함된 정보:
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
포함된 정보:
- 팹 위치
- 조립 위치