전력 관리 AC/DC 및 DC/DC 컨버터(통합 FET)

TPS541620

활성

4.5V~15V, 고급 전류 모드, 듀얼 6A 동기 SWIFT™ 스텝다운 컨버터

제품 상세 정보

Rating Catalog Topology Buck Iout (max) (A) 6 Vin (max) (V) 15 Vin (min) (V) 4.5 Vout (max) (V) 6 Vout (min) (V) 0.5 Features Adjustable current limit, Enable, Frequency synchronization, Power good, Prebias startup, Soft-start adjustable, Synchronous rectification Control mode ACM/AECM Switching frequency (min) (kHz) 500 Switching frequency (max) (kHz) 2000 Operating temperature range (°C) -40 to 150 Duty cycle (max) (%) 92.5 Type Converter
Rating Catalog Topology Buck Iout (max) (A) 6 Vin (max) (V) 15 Vin (min) (V) 4.5 Vout (max) (V) 6 Vout (min) (V) 0.5 Features Adjustable current limit, Enable, Frequency synchronization, Power good, Prebias startup, Soft-start adjustable, Synchronous rectification Control mode ACM/AECM Switching frequency (min) (kHz) 500 Switching frequency (max) (kHz) 2000 Operating temperature range (°C) -40 to 150 Duty cycle (max) (%) 92.5 Type Converter
VQFN-HR (RPB) 25 15 mm² 5 x 3
  • Integrated 24-mΩ and 10-mΩ MOSFETs with lossless current sensing
  • Fixed-frequency, internally-compensated advanced current mode (ACM) control
  • Dual output with up to 6 A each output
  • Dual-phase, single output for up to 12 A
  • Phase interleaving operation for one or two phases
  • Synchronization to an external clock using SYNC and CLKO
  • 0.5-V to 5.5-V output voltage range
  • Four selectable PWM ramp options for each switching frequency to optimize control loop performance
  • Soft start time is configurable by an external cap in single-output, multi-phase configuration and is fixed at 1 ms for dual-output configuration
  • True differential remote sensing in multi-phase operation
  • Independent enable and power good
  • Four selectable switching frequency options of 500 kHz, 1 MHz, 1.5 MHz, and 2.0 MHz
  • Supports safe pre-biased start-up
  • Overtemperature protection with hysteresis
  • –40°C to 150°C operation junction temperature
  • 3-mm × 5-mm, 25-pin VQFN-HR package with 0.5-mm pitch
  • Integrated 24-mΩ and 10-mΩ MOSFETs with lossless current sensing
  • Fixed-frequency, internally-compensated advanced current mode (ACM) control
  • Dual output with up to 6 A each output
  • Dual-phase, single output for up to 12 A
  • Phase interleaving operation for one or two phases
  • Synchronization to an external clock using SYNC and CLKO
  • 0.5-V to 5.5-V output voltage range
  • Four selectable PWM ramp options for each switching frequency to optimize control loop performance
  • Soft start time is configurable by an external cap in single-output, multi-phase configuration and is fixed at 1 ms for dual-output configuration
  • True differential remote sensing in multi-phase operation
  • Independent enable and power good
  • Four selectable switching frequency options of 500 kHz, 1 MHz, 1.5 MHz, and 2.0 MHz
  • Supports safe pre-biased start-up
  • Overtemperature protection with hysteresis
  • –40°C to 150°C operation junction temperature
  • 3-mm × 5-mm, 25-pin VQFN-HR package with 0.5-mm pitch

The TPS541620 is a highly integrated non-isolated dual DC-DC converter that is capable of high-frequency operation in a 3-mm × 5-mm package. The device can be configured as two single 6-A rails or combined to drive a single 12-A current load. The device implements a fixed-frequency advanced current mode control (ACM) with selectable ramp amplitude configurations to optimize the loop bandwidth. Two mode selection pins (MODE1 and 2) are used to select switching frequency, configuration, clock phase delay, and internal compensation.

The TPS541620 is a highly integrated non-isolated dual DC-DC converter that is capable of high-frequency operation in a 3-mm × 5-mm package. The device can be configured as two single 6-A rails or combined to drive a single 12-A current load. The device implements a fixed-frequency advanced current mode control (ACM) with selectable ramp amplitude configurations to optimize the loop bandwidth. Two mode selection pins (MODE1 and 2) are used to select switching frequency, configuration, clock phase delay, and internal compensation.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 유사한 기능
TPS543620 활성 4V~18V 입력, 고급 전류 모드, 6A 동기 SWIFT™ 스텝다운 컨버터 Smaller, more efficient power module with single output.
TPSM5D1806 활성 4.5V~15V 입력, 듀얼 6A, 단일 12A, 출력 전원 모듈 Module version featuring an integrated inductor.

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
6개 모두 보기
유형 직함 날짜
* Data sheet TPS541620 4.5-V to 15-V, Dual 6-A / Single 12-A, Synchronous Step-Down SWIFT™ Converter With Internal Compensation datasheet (Rev. A) PDF | HTML 2021/03/18
Application brief Solving power design challenges in oscilloscope applications PDF | HTML 2023/10/31
Application note Powering the AFE7920 with the TPS62913 Low-Ripple and Low-Noise Buck Converter (Rev. A) PDF | HTML 2021/12/13
Application brief Achieving High Thermal Performance in Compact Buck Power Modules PDF | HTML 2021/02/24
Certificate TPS541620DEVM-050 EU Declaration of Conformity (DoC) 2020/07/23
Certificate TPS541620SEVM-050 EU Declaration of Conformity (DoC) 2020/07/23

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS541620EVM — 단일 및 이중 출력 스텝다운 6A 및 12A 컨버터 평가 모듈(EVM)

TPS541620DEVM-050(6A) 및 TPS541620SEVM-050(12A)은 TPS541620용 평가 모듈(EVM)입니다. TPS541620은 내부 보상 듀얼 스텝다운 컨버터입니다.  TPS541620은 두 개의 단일 레일로 구성하거나 단일 고전류 레일을 구동하기 위해 결합할 수 있는 두 개의 출력을 지원하는 3mm x 5mm 패키지입니다.
사용 설명서: PDF | HTML
시뮬레이션 모델

TPS541620 SIMPLIS Transient and Average Model

SNVMC59.ZIP (2509 KB) - SIMPLIS Model
패키지 CAD 기호, 풋프린트 및 3D 모델
VQFN-HR (RPB) 25 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상