신규

TPS60800-Q1

Name: TPS60800-Q1
Brand: TI
SKU: TPS60800-Q1
Price: 0.374 USD

활성

차량용, 비조정 200mA 충전 펌프 전압 인버터

지금 주문

데이터 시트

document-pdfAcrobat TPS60800-Q1 Unregulated, 200mA, Automotive, Charge Pump Voltage Inverter datasheet (영어) PDF | HTML

TPS60800-Q1

활성

데이터 시트

지금 주문

제품 상세 정보

Rating

Automotive

Iout (max) (A)

0.2

Vin (max) (V)

5.25

Vin (min) (V)

1.8

Vout (max) (V)

-1.8

Vout (min) (V)

-5.25

Features

Adjustable current limit, Enable pin, Unregulated

Switching frequency (min) (kHz)

160

Switching frequency (max) (kHz)

750

TI functional safety category

Functional Safety-Capable

Operating temperature range (°C)

-40 to 125

Iq (typ) (µA)

340

Type

Charge pump, Converter (Integrated Switch), DC/DC converter

Rating

Automotive

Iout (max) (A)

0.2

Vin (max) (V)

5.25

Vin (min) (V)

1.8

Vout (max) (V)

-1.8

Vout (min) (V)

-5.25

Features

Adjustable current limit, Enable pin, Unregulated

Switching frequency (min) (kHz)

160

Switching frequency (max) (kHz)

750

TI functional safety category

Functional Safety-Capable

Operating temperature range (°C)

-40 to 125

Iq (typ) (µA)

340

Type

Charge pump, Converter (Integrated Switch), DC/DC converter

SOT-5X3 (DRL)

6

2.56 mm² 1.6 x 1.6

Qualified for automotive applications
AEC-Q100 test guidance with the following results:
- Device temperature grade 1: –40°C to +125°C ambient operating temperature range
Inverts input supply voltage
Up to 200mA output current
Only three small 1µf ceramic capacitors needed
Input voltage range from 1.8V to 5.25V
Device quiescent current typical 340µA
PowerSave-Mode for Improved Efficiency at Low Output Currents
Efficiency greater than 90% over a wide output current range
Integrated active Schottky diode for start-up into load
Available in 6-pin SOT563 package
Next generation of TPS60400-Q1
Evaluation module available: TPS60800Q1EVM-068

Qualified for automotive applications
AEC-Q100 test guidance with the following results:
- Device temperature grade 1: –40°C to +125°C ambient operating temperature range
Inverts input supply voltage
Up to 200mA output current
Only three small 1µf ceramic capacitors needed
Input voltage range from 1.8V to 5.25V
Device quiescent current typical 340µA
PowerSave-Mode for Improved Efficiency at Low Output Currents
Efficiency greater than 90% over a wide output current range
Integrated active Schottky diode for start-up into load
Available in 6-pin SOT563 package
Next generation of TPS60400-Q1
Evaluation module available: TPS60800Q1EVM-068

The TPS60800-Q1 generates an unregulated negative output voltage from an input voltage ranging from 1.8V to 5.25V. The devices are typically supplied by a preregulated supply rail of 5V or 3.3V. As TPS60800-Q1 supports wide input voltage range, two or three NiCd, NiMH, or alkaline battery cells, as well as one Li-Ion cell can also power the device.

Only three external 1µF capacitors are required to build a complete DC-DC charge pump inverter. Assembled in a 6-pin SOT563 package, the complete converter can be built on a 40mm2 board area. Additional board area and component count reduction is achieved by replacing the Schottky diode that is typically needed for start-up into load by integrated circuitry.

The TPS60800-Q1 can deliver a maximum output current of 200mA with a typical conversion efficiency of greater than 90% over a wide output current range. TPS60800-Q1 comes with a variable switching frequency to reduce operating current in applications with a wide load range and enables the design with low-value capacitors.

The TPS60800-Q1 generates an unregulated negative output voltage from an input voltage ranging from 1.8V to 5.25V. The devices are typically supplied by a preregulated supply rail of 5V or 3.3V. As TPS60800-Q1 supports wide input voltage range, two or three NiCd, NiMH, or alkaline battery cells, as well as one Li-Ion cell can also power the device.

Only three external 1µF capacitors are required to build a complete DC-DC charge pump inverter. Assembled in a 6-pin SOT563 package, the complete converter can be built on a 40mm2 board area. Additional board area and component count reduction is achieved by replacing the Schottky diode that is typically needed for start-up into load by integrated circuitry.

The TPS60800-Q1 can deliver a maximum output current of 200mA with a typical conversion efficiency of greater than 90% over a wide output current range. TPS60800-Q1 comes with a variable switching frequency to reduce operating current in applications with a wide load range and enables the design with low-value capacitors.

filter

기타 AC/DC 및 DC/DC 컨버터(통합 FET) 찾기

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star

=TI에서 선정한 이 제품의 인기 문서

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.

3개 모두 보기

	유형	직함		날짜
*	Data sheet	TPS60800-Q1 Unregulated, 200mA, Automotive, Charge Pump Voltage Inverter datasheet	PDF \| HTML	2025/05/14
	Certificate	TPS60800Q1EVM-068 EU Declaration of Conformity (DoC)		2025/05/30
	Functional safety information	TPS60800-Q1 Functional Safety FIT Rate, FMD and Pin FMA	PDF \| HTML	2025/05/22

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS60800EVM-068 — TPS60800-Q1 평가 모듈

TPS60800-Q1은 200mA의 최대 부하 전류로 1.8V~5.25V 범위의 입력 전압에서 조절되지 않은 음극 출력 전압을 생성합니다. 이 평가 모듈(EVM)은 TPS60800-Q1의 기능에 대한 테스트 및 평가를 용이하게 합니다. 완전한 DC/DC 충전 펌프 인버터를 구축하는 데 3개의 외부 1μF 커패시터만 있으면 됩니다. 입력, 출력 및 플라잉 커패시터를 더 추가할 수도 있습니다. 이 장치의 가변 스위칭 주파수 범위는 500kHz~750kHz 사이입니다. 이 장치는 6핀 SOT563 패키지로 제공됩니다.

사용 설명서: PDF | HTML