首頁 數據轉換器 類比轉數位轉換器 (ADC) 精確 ADC
首頁
數據轉換器
類比轉數位轉換器 (ADC)
精確 ADC

ADC168M102R-SEP

現行

耐輻射 8 通道、1MSPS、16 位元、同時取樣 SAR ADC

立即訂購
產品規格表

ADC168M102R-SEP

現行
產品規格表 立即訂購

產品詳細資料

Resolution (Bits) 16 Sample rate (max) (ksps) 1000 Number of input channels 8 Interface type SPI Architecture SAR Input type Differential, Pseudo-Differential Multichannel configuration Multiplexed, Simultaneous Sampling Rating Space Reference mode External, Internal Input voltage range (max) (V) 5.5 Input voltage range (min) (V) 0 Operating temperature range (°C) -55 to 125 Power consumption (typ) (mW) 47.2 Analog supply voltage (min) (V) 2.7 Analog supply voltage (max) (V) 5.5 SNR (dB) 93 Digital supply (min) (V) 2.3 Digital supply (max) (V) 5.5
Resolution (Bits) 16 Sample rate (max) (ksps) 1000 Number of input channels 8 Interface type SPI Architecture SAR Input type Differential, Pseudo-Differential Multichannel configuration Multiplexed, Simultaneous Sampling Rating Space Reference mode External, Internal Input voltage range (max) (V) 5.5 Input voltage range (min) (V) 0 Operating temperature range (°C) -55 to 125 Power consumption (typ) (mW) 47.2 Analog supply voltage (min) (V) 2.7 Analog supply voltage (max) (V) 5.5 SNR (dB) 93 Digital supply (min) (V) 2.3 Digital supply (max) (V) 5.5
VQFN (RHB) 32 25 mm² 5 x 5
  • Radiation tolerant:
    • Single-event latch-up (SEL) immune up to LET = 43MeV-cm2/mg at 125°C
    • Single-event functional interrupt (SEFI) characterized up to LET = 43MeV-cm2/mg
    • Total ionizing dose (TID) RLAT/RHA characterized up to 30krad (Si)
  • Space-enhanced plastic (space EP):
    • Supports defense and aerospace applications
    • Controlled baseline
    • One assembly and test site
    • Extended product life cycle
    • Product traceability
    • Outgassing test performed as per ASTM E595
    • Vendor item drawing (VID) V62/24631
    • Military temperature range: –55°C to +125°C
    • Gold bond wire, NiPdAu lead finish
  • Eight pseudo- or four fully differential inputs
  • Simultaneous sampling of two channels
  • Excellent AC performance:
    • SNR: 93dB
    • THD: –98dB
  • Dual programmable and buffered 2.5V reference allows:
    • Two different input voltage range settings
    • Two-level PGA implementation
  • Programmable auto-sequencer
  • Integrated data storage (up to 4 per channel) for oversampling applications
  • 2-bit counter for safety applications
  • Radiation tolerant:
    • Single-event latch-up (SEL) immune up to LET = 43MeV-cm2/mg at 125°C
    • Single-event functional interrupt (SEFI) characterized up to LET = 43MeV-cm2/mg
    • Total ionizing dose (TID) RLAT/RHA characterized up to 30krad (Si)
  • Space-enhanced plastic (space EP):
    • Supports defense and aerospace applications
    • Controlled baseline
    • One assembly and test site
    • Extended product life cycle
    • Product traceability
    • Outgassing test performed as per ASTM E595
    • Vendor item drawing (VID) V62/24631
    • Military temperature range: –55°C to +125°C
    • Gold bond wire, NiPdAu lead finish
  • Eight pseudo- or four fully differential inputs
  • Simultaneous sampling of two channels
  • Excellent AC performance:
    • SNR: 93dB
    • THD: –98dB
  • Dual programmable and buffered 2.5V reference allows:
    • Two different input voltage range settings
    • Two-level PGA implementation
  • Programmable auto-sequencer
  • Integrated data storage (up to 4 per channel) for oversampling applications
  • 2-bit counter for safety applications

The ADC168M102R-SEP is a dual, 16-bit, 1MSPS analog-to-digital converter (ADC). This ADC has eight pseudo- or four fully differential input channels grouped into two pairs for simultaneous signal acquisition. The analog inputs are maintained differentially to the input of the ADC. Use the input multiplexer in either pseudo-differential mode or fully differential mode. Pseudo-differential mode supports up to four channels per ADC (4x2), and fully differential mode converts up to two inputs per ADC (2x2).

The ADC168M102R-SEP offers two programmable reference outputs, flexible supply voltage ranges, a programmable auto-sequencer, and several power-down features. The device also includes data storage up to four conversion results per channel.

The ADC168M102R-SEP is a dual, 16-bit, 1MSPS analog-to-digital converter (ADC). This ADC has eight pseudo- or four fully differential input channels grouped into two pairs for simultaneous signal acquisition. The analog inputs are maintained differentially to the input of the ADC. Use the input multiplexer in either pseudo-differential mode or fully differential mode. Pseudo-differential mode supports up to four channels per ADC (4x2), and fully differential mode converts up to two inputs per ADC (2x2).

The ADC168M102R-SEP offers two programmable reference outputs, flexible supply voltage ranges, a programmable auto-sequencer, and several power-down features. The device also includes data storage up to four conversion results per channel.
filter 尋找其它 精確 ADC
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能與所比較的裝置相似
ADC128S102-SEP 現行 耐輻射、八通道、50-kSPS 至 1-MSPS、12 位元類比轉數位轉換器 (ADC) Lower resolution and does not offer simultaneous sampling or an internal voltage reference.
ADC128S102QML-SP 現行 抗輻射、八通道、50-kSPS 至 1-MSPS、12 位元類比轉數位轉換器 (ADC) Lower resolution and does not offer simultaneous sampling or an internal voltage reference, but has extended space-hardening performance frequently required for geosynchronous or extended-lifetime applications.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 6
類型 標題 日期
* Data sheet ADC168M102R-SEP Radiation-Tolerant, 8-Channel, 1MSPS, 16-Bit ADC datasheet PDF | HTML 2024年 12月 30日
* Radiation & reliability report ADC168M102R-SEP Single-Event Latch-Up (SEL) Radiation Report PDF | HTML 2025年 2月 3日
* Radiation & reliability report ADC168M102R-SEP Production Flow and Reliability Report PDF | HTML 2025年 1月 31日
* Radiation & reliability report ADC168M102R-SEP Total Ionizing Dose (TID) Radiation Report PDF | HTML 2024年 1月 15日
Application brief Precision ADCs in Space PDF | HTML 2025年 11月 19日
Selection guide TI Space Products (Rev. K) 2025年 4月 4日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

ADC168M102REVM-PDK — ADC168M102R-SEP 評估模組

ADC168M102R 評估模組 (EVM) 性能示範套件 (PDK) 是用於評估 16 位元 8 通道 1MSPS 同時取樣類比數位轉換器 (ADC) ADC168M102R-SEP 的平台。評估套件包含 ADC168M102REVM 板和精密主機介面 (PHI) 控制器板，可讓隨附的電腦軟體透過通用序列匯流排 (USB) 與 ADC 通訊，以進行資料擷取、配置與分析。
使用指南: PDF | HTML
TI.com 無法提供
計算工具

ANALOG-ENGINEER-CALC — 類比工程師計算機

類比工程師的計算機旨在加速類比電路設計工程師定期使用的許多重複計算。此基於 PC 的工具提供圖形介面，列出各種常見計算，從使用回饋電阻器設定運算放大器增益到選擇適當的電路設計元件以穩定類比數位轉換器 (ADC) 驅動緩衝電路。

除了作為獨立工具使用外，此計算機還與類比工程師口袋參考中描述的概念相得益彰。

View Options
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RHB) 32 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片