首頁 放大器 特殊功能放大器 對數放大器
首頁
放大器
特殊功能放大器
對數放大器

LOG114

現行

具有 2.5V 參考和未認可的輸出運算放大器的精密高速對數放大器

立即訂購
產品規格表

現在提供此產品的更新版本

open-in-new 比較替代產品
功能相同，但針腳輸出與所比較的裝置不同。
LOG200 現行 具有光二極體偏壓和暗電流修正的高速精密對數放大器 Upgraded performance with smaller package option

LOG114

現行
產品規格表 立即訂購

產品詳細資料

Scale factor (V/decade) 0.375 Input current range (min) (nA) 0.1 Input current range (max) (mA) 10 Offset voltage (input amplifiers) (max) (mV) 4 Vs (±) (min) (V) 4.8 Vs (±) (max) (V) 11 Iq (max) (mA) 15 Dynamic range (typ) (dB) 160 Reference type Internal Auxiliary op amps 2 Full-scale output voltage (min) (±V) -4.4 Full-scale output voltage (max) (±V) 4.4 Conformity error (initial 5 decades) (max) (%) 0.2 Conformity error (initial 5 decades) (typ. over temp) (%/°C) 0.1 Operating temperature range (°C) 0 to 70 Specified voltage (±V) 5 Rating Catalog
Scale factor (V/decade) 0.375 Input current range (min) (nA) 0.1 Input current range (max) (mA) 10 Offset voltage (input amplifiers) (max) (mV) 4 Vs (±) (min) (V) 4.8 Vs (±) (max) (V) 11 Iq (max) (mA) 15 Dynamic range (typ) (dB) 160 Reference type Internal Auxiliary op amps 2 Full-scale output voltage (min) (±V) -4.4 Full-scale output voltage (max) (±V) 4.4 Conformity error (initial 5 decades) (max) (%) 0.2 Conformity error (initial 5 decades) (typ. over temp) (%/°C) 0.1 Operating temperature range (°C) 0 to 70 Specified voltage (±V) 5 Rating Catalog
VQFN (RGV) 16 16 mm² (4 mm × 4 mm)
  • Advantages:
    • Tiny for high density systems
    • Precision on one supply
    • Fast over eight decades
    • Fully-tested function
  • Two scaling amplifiers
  • Wide input dynamic range: eight decades, 100pA to 10mA
  • 2.5V reference
  • Stable over temperature
  • Low quiescent current: 10mA
  • Dual or single supply: ±5V, 5V
  • Package: Small QFN-16 (4mm × 4mm)
  • Specified temperature range: −5°C to 75°C
  • Advantages:
    • Tiny for high density systems
    • Precision on one supply
    • Fast over eight decades
    • Fully-tested function
  • Two scaling amplifiers
  • Wide input dynamic range: eight decades, 100pA to 10mA
  • 2.5V reference
  • Stable over temperature
  • Low quiescent current: 10mA
  • Dual or single supply: ±5V, 5V
  • Package: Small QFN-16 (4mm × 4mm)
  • Specified temperature range: −5°C to 75°C

The LOG114 is specifically designed for measuring low-level and wide dynamic range currents in communications, lasers, medical, and industrial systems. The device computes the logarithm or log-ratio of an input current or voltage relative to a reference current or voltage (logarithmic transimpedance amplifier).

High precision is verified over a wide dynamic range of input signals on either bipolar (±5V) or single (5V) supply. Special temperature drift compensation circuitry is included on-chip. In log-ratio applications, the signal current can be from a high impedance source such as a photodiode or resistor in series with a low impedance voltage source. The reference current is provided by a resistor in series with a precision internal voltage reference, photo diode, or active current source.

The output signal at VLOGOUT has a scale factor of 0.375V/decade of input current, which limits the output so that the output fits within a 5V or 10V range. The output can be scaled and offset with one of the available additional amplifiers, so the output matches a wide variety of ADC input ranges. Stable DC performance allows accurate measurement of low-level signals over a wide temperature range. The LOG114 is specified over a −5°C to 75°C temperature range and can operate from −40°C to 85°C.

The LOG114 is specifically designed for measuring low-level and wide dynamic range currents in communications, lasers, medical, and industrial systems. The device computes the logarithm or log-ratio of an input current or voltage relative to a reference current or voltage (logarithmic transimpedance amplifier).

High precision is verified over a wide dynamic range of input signals on either bipolar (±5V) or single (5V) supply. Special temperature drift compensation circuitry is included on-chip. In log-ratio applications, the signal current can be from a high impedance source such as a photodiode or resistor in series with a low impedance voltage source. The reference current is provided by a resistor in series with a precision internal voltage reference, photo diode, or active current source.

The output signal at VLOGOUT has a scale factor of 0.375V/decade of input current, which limits the output so that the output fits within a 5V or 10V range. The output can be scaled and offset with one of the available additional amplifiers, so the output matches a wide variety of ADC input ranges. Stable DC performance allows accurate measurement of low-level signals over a wide temperature range. The LOG114 is specified over a −5°C to 75°C temperature range and can operate from −40°C to 85°C.
filter 尋找其它 對數放大器
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 LOG114 Single-Supply, High-Speed, Precision Logarithmic Amplifier datasheet (Rev. C) PDF | HTML 2025/12/10

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LOG114EVM — LOG114 評估模組

LOG114EVM 是一個現成的平台，可用於評估各種配置中 LOG114 的性能。LOG114EVM 配置爲在單 5-V 電源上運作。LOG114EVM 中使用的電路，設計為在廣泛輸入電流 (10 nA 至 10 mA) 中運作，並可將輸出電壓從 1.15 V 調整至 2.75 V。其他電路包含精密位準移位器與高電流線性修正區段。

使用指南: PDF
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

LOG114 PSpice Model (Rev. C)

SBOM383C.ZIP (53 KB) - PSpice 模型
支援產品和硬體
模擬型號

LOG114 TINA-TI Reference Design (Rev. C)

SBOM384C.TSC (101 KB) - TINA-TI 參考設計
支援產品和硬體
模擬型號

LOG114 TINA-TI Spice Model (Rev. C)

SBOM385C.ZIP (5 KB) - TINA-TI Spice 模型
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGV) 16 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片