首頁 電源管理 AC/DC 和 DC/DC 轉換器 (整合式 FET)
首頁
電源管理
AC/DC 和 DC/DC 轉換器 (整合式 FET)
最新

TPS55285

現行

具備 I²C 介面的 22V 8A 降壓升壓轉換器

立即訂購
產品規格表

TPS55285

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Topology Buck-Boost Switch current limit (typ) (A) 8 Vin (max) (V) 22 Vin (min) (V) 2.4 Vout (max) (V) 15 Vout (min) (V) 0.8 Features Adjustable current limit, Dynamic voltage scaling, Enable, Frequency synchronization, I2C interface, Light-load efficiency, Load Disconnect, Output discharge, Spread Spectrum, Synchronous rectification, USB C/PD compatible, UVLO adjustable EMI features Frequency Dithering, Spread Spectrum Switching frequency (min) (kHz) 360 Switching frequency (max) (kHz) 2400 Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 720 Duty cycle (max) (%) 100 Type Converter
Rating Catalog Topology Buck-Boost Switch current limit (typ) (A) 8 Vin (max) (V) 22 Vin (min) (V) 2.4 Vout (max) (V) 15 Vout (min) (V) 0.8 Features Adjustable current limit, Dynamic voltage scaling, Enable, Frequency synchronization, I2C interface, Light-load efficiency, Load Disconnect, Output discharge, Spread Spectrum, Synchronous rectification, USB C/PD compatible, UVLO adjustable EMI features Frequency Dithering, Spread Spectrum Switching frequency (min) (kHz) 360 Switching frequency (max) (kHz) 2400 Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 720 Duty cycle (max) (%) 100 Type Converter
WQFN-HR (VAL) 15 8.75 mm² 3.5 x 2.5
  • Programmable power supply (PPS) support for USB power delivery (USB PD)
    • Wide input voltage range: 2.4V to 22V
    • 3.0V Minimum input voltage for start-up
    • Programmable output voltage range: 0.8V to 15V with 10mV step
    • ±1% reference voltage accuracy
    • Adjustable output voltage compensation for voltage drop over the cable
    • Programmable output current limit up to 6.35A with 50mA step
  • High efficiency over entire load range
    • 92.0% efficiency at VIN = 20V, VOUT = 5V and IOUT = 5A
    • 95.7% efficiency at VIN = 12V, VOUT = 15V and IOUT = 5A
  • I2C Programming
    • Output enable(OE) On/Off
    • Slew rate of output voltage change
    • Switching frequency: 400kHz, 800kHz, 1.6MHz, 2.1MHz
    • Programmable PFM and FPWM mode at light load
    • Spread spectrum enable/disable
    • Output discharge enable/disable
  • Rich protection features
    • Input overvoltage protection
    • Output relative overvoltage protection
    • Hiccup mode for output short-circuit protection
    • Thermal shutdown protection
    • 8A average inductor current limit
  • Small solution size
    • Four low RDS(ON) internal MOSFETs
    • Maximum switching frequency up to 2.1MHz
    • 2.5mm × 3.5mm HotRod™ WQFN package
  • Programmable power supply (PPS) support for USB power delivery (USB PD)
    • Wide input voltage range: 2.4V to 22V
    • 3.0V Minimum input voltage for start-up
    • Programmable output voltage range: 0.8V to 15V with 10mV step
    • ±1% reference voltage accuracy
    • Adjustable output voltage compensation for voltage drop over the cable
    • Programmable output current limit up to 6.35A with 50mA step
  • High efficiency over entire load range
    • 92.0% efficiency at VIN = 20V, VOUT = 5V and IOUT = 5A
    • 95.7% efficiency at VIN = 12V, VOUT = 15V and IOUT = 5A
  • I2C Programming
    • Output enable(OE) On/Off
    • Slew rate of output voltage change
    • Switching frequency: 400kHz, 800kHz, 1.6MHz, 2.1MHz
    • Programmable PFM and FPWM mode at light load
    • Spread spectrum enable/disable
    • Output discharge enable/disable
  • Rich protection features
    • Input overvoltage protection
    • Output relative overvoltage protection
    • Hiccup mode for output short-circuit protection
    • Thermal shutdown protection
    • 8A average inductor current limit
  • Small solution size
    • Four low RDS(ON) internal MOSFETs
    • Maximum switching frequency up to 2.1MHz
    • 2.5mm × 3.5mm HotRod™ WQFN package

The TPS55285 is a fully integrated synchronous buck-boost converter that is optimized for converting battery voltage, USB Power Delivery (USB PD) or adaptor voltage into power supply rails. The TPS55285 integrates four 15mΩ MOSFETs to provide a high efficiency and small size solution.

The TPS55285 has a wide input voltage range from 2.4V (3.0V rising) to 22V and is capable of outputting 0.8V to 15V voltage with 10mV step to support a variety of applications. The TPS55285 features 8A average inductor current limit and supplies up to 7A output current in buck mode. In boost mode, it is able to deliver 60W from 12V input or 30W from 5V input.

Through the I2C interface, the output voltage of the TPS55285 is programmed dynamically. The default output voltage is 5V when the device is enabled. The I2C interface allows for configuration of slew rate of the output voltage change, switching frequency, forced PWM mode operation.

The TPS55285 offers input and output overvoltage protection, average inductor current limit, cycle-by-cycle peak current limit and output short circuit protection. The TPS55285 also allows for safe operating with output current limit without external output current sense resistor and hiccup mode protection in sustained overload conditions.

The TPS55285 allows the use of small inductor and capacitor with high switching frequency. The TPS55285 is available in 2.5mm × 3.5mm QFN package.

The TPS55285 is a fully integrated synchronous buck-boost converter that is optimized for converting battery voltage, USB Power Delivery (USB PD) or adaptor voltage into power supply rails. The TPS55285 integrates four 15mΩ MOSFETs to provide a high efficiency and small size solution.

The TPS55285 has a wide input voltage range from 2.4V (3.0V rising) to 22V and is capable of outputting 0.8V to 15V voltage with 10mV step to support a variety of applications. The TPS55285 features 8A average inductor current limit and supplies up to 7A output current in buck mode. In boost mode, it is able to deliver 60W from 12V input or 30W from 5V input.

Through the I2C interface, the output voltage of the TPS55285 is programmed dynamically. The default output voltage is 5V when the device is enabled. The I2C interface allows for configuration of slew rate of the output voltage change, switching frequency, forced PWM mode operation.

The TPS55285 offers input and output overvoltage protection, average inductor current limit, cycle-by-cycle peak current limit and output short circuit protection. The TPS55285 also allows for safe operating with output current limit without external output current sense resistor and hiccup mode protection in sustained overload conditions.

The TPS55285 allows the use of small inductor and capacitor with high switching frequency. The TPS55285 is available in 2.5mm × 3.5mm QFN package.
filter 尋找其它 AC/DC 和 DC/DC 轉換器 (整合式 FET)
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet TPS55285 22V, 8A Buck-Boost Converter with I2 C Interface datasheet (Rev. A) PDF | HTML 2025年 10月 9日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS55285EVM — TPS55285 評估模組

TPS55285EVM-053 評估模組 (EVM) 旨在示範 TPS55285 裝置的特性和功能，其為一具 I²C 介面的高效能，高效率同步降壓升壓轉換器。TPS55285 也可透過選用輸出電流限制和打嗝模式保護，驗證在持續過載條件下的安全運作。

使用指南: PDF | HTML
TI.com 無法提供
模擬型號

TPS55285 PSpice Transient Model

SLVMEI1.ZIP (925 KB) - PSpice Model
下載
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN-HR (VAL) 15 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片