TPS61382-Q1
- AEC-Q100 qualified for automotive applications
- Device temperature grade 1: –40°C to 125°C ambient operating temperature range
- I2C programmable buck/LDO charger
- Supports charger input voltage (VOUT Pin) up to 21V, absmax up to 40V to withstand load dump
- Supports multi-chemistry battery charging profile of 1-2cell NiMH, 1cell Li-Ion, LiFePO4, 1 cell super capacitor
- Programmable charging current up to 3A
- Battery voltage operating range 0V to 3.8V
- Programmable charging timer up to 32h
- NTC thermistor input to monitor battery temperature
- Programmable boost converter supporting 12V car battery backup power system
- Programmable output voltage range: 5V to 12V
- Programmable boost average input current limit from 5A to 15A
- Back-up battery (BUB) voltage in boost mode: 0.5V to 3.8V
- Minimum 3V for start up when Vout<2.8V
- Minimum 1V for start up when Vout>2.8V
- <20us automatic transition into the boost mode when 12V system voltage drops
- Backup battery state-of-health(SOH) detection
- Adjustable discharge current from 0A to 1.5A
- Multi-signal analog output (AVI pin) of battery voltage, discharge current and battery temperature
- Lower quiescent current and leakage current
- 20µA quiescent current in standby mode
- < 1µA shutdown current
- < 1µA leakage current for pins connected to the backup battery
- EMI mitigation
- 400kHz fix switching frequency
- Optional programmable spread spectrum
-
3mm × 4mm 25-pin package with wettable flank
The TPS61382Q1 is 400kHz, 40V, 15A automotive bi-directional boost converter/ buck charger with battery state of health detection function for back-up power like TBOX. The converter supports absmax voltage up to 40V on VOUT pin to withstand load-dump and supports connecting to 12V car battery.
The TPS61382Q1 integrates I2C configurable buck/LDO charger supporting NiMH, Li-Ion, LiFePO4, super capacitor.
TPS61382Q1 integrates boost function that operates over 0.5V to 3.8V BUB voltage and 5-12V output voltage. The device applies fix frequency peak current control scheme with optional spread spectrum to minimize EMI. The boost function supports 5A-15A programmable average current limit.
The TPS61382Q1 integrates battery health detection feature which discharges the battery with a constant current and detects the voltage drop across the battery internal resistance.
The TPS61382Q1 is available in a 3mm × 4mm QFN package with wettable flank. Care needs to be taken when designing the PCB with TPS61382Q1, view for details.
您可能會感興趣的類似產品
引腳對引腳且具備與所比較裝置相同的功能
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 日期 |
|---|---|---|---|---|
| * | Data sheet | TPS61382-Q1 Automotive 400kHz, 40V, 15A Boost Converter with Buck/LDO Charger and Battery State of Health Detection datasheet (Rev. A) | PDF | HTML | 2025年 9月 25日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPS61381QEVM-126 — TPS61381-Q1 評估模組
TPS61381QEVM-126 可在 0V 至 12V 的廣泛備用電池電壓範圍及 0V-40V 的主電池 (VBAT 埠) 電壓範圍中運作，以實現雙向運作。EVM 在升壓模式下以 3.6V BUB 和 6.2V 輸出支援高達 7.5A 負載的輸出，並在充電器模式下支援 50-100mA 充電電流。TPS61381QEVM-126 可在升壓模式下支援優於 2.5% 的輸出電壓調節準確度，並在充電器模式下支援優於 1% 的電壓準確度。裝置功能可使用 I2C 介面調整。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| WQFN-FCRLF (RAV) | 24 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。