TPS6755

現行

可調整反相 DC/DC 轉換器

現在提供此產品的更新版本

open-in-new 比較替代產品
功能相同,但引腳輸出與所比較的產品不同
TPS63700 現行 採用 3x3 QFN 封裝的可調式 -15V 輸出反向 DC/DC 轉換器 Smaller solution size, higher efficiency

產品詳細資料

Iout (max) (A) 1 Vin (min) (V) 2.7 Vin (max) (V) 9 Topology Inverting Type Converter Switching frequency (min) (kHz) 160 Switching frequency (max) (kHz) 160 Features Enable Vout (min) (V) -9.3 Vout (max) (V) -1.23 Rating Catalog Operating temperature range (°C) to Iq (typ) (A) 0.0019
Iout (max) (A) 1 Vin (min) (V) 2.7 Vin (max) (V) 9 Topology Inverting Type Converter Switching frequency (min) (kHz) 160 Switching frequency (max) (kHz) 160 Features Enable Vout (min) (V) -9.3 Vout (max) (V) -1.23 Rating Catalog Operating temperature range (°C) to Iq (typ) (A) 0.0019
PDIP (P) 8 92.5083 mm² 9.81 x 9.43 SOIC (D) 8 29.4 mm² 4.9 x 6
  • 1-W Output (VCC >= 4.5 V)
  • 2.7-V to 9-V Input Operating Range
  • 78% Typical Efficiency
  • 160-kHz Fixed-Frequency Current-Mode PWM Controller
  • EN Input Inhibits Operation and Reduces Supply Current to 1 uA
  • Output Voltage Limited to VO <= 12 V- VCC
  • Soft Start
  • 8-Pin SOIC and DIP Packages
  • -40°C to 85°C Free-Air Temperature Range
  • Pin-for-Pin Compatible with MAX755
  • 1-W Output (VCC >= 4.5 V)
  • 2.7-V to 9-V Input Operating Range
  • 78% Typical Efficiency
  • 160-kHz Fixed-Frequency Current-Mode PWM Controller
  • EN Input Inhibits Operation and Reduces Supply Current to 1 uA
  • Output Voltage Limited to VO <= 12 V- VCC
  • Soft Start
  • 8-Pin SOIC and DIP Packages
  • -40°C to 85°C Free-Air Temperature Range
  • Pin-for-Pin Compatible with MAX755

The TPS6755 is an adjustable inverting dc/dc converter capable of operating from inputs as low as 2.7 V. The only external components required are an inductor, an output filter capacitor, an input filter capacitor, a reference filter capacitor, two resistors, and a Schottky rectifier. An enable input is provided to shut down the inverter when an output voltage is not needed. The typical supply current is 1.9 mA at no-load and is further reduced to 1-uA when the enable input is low.

The device features a 160-kHz current-mode pulse-width-modulation (PWM) controller with a p-channel MOSFET power switch. The gate drive uses the converter output to reduce the die area needed to realize the 0.4- MOSFET. Soft start is accomplished with the addition of one small capacitor at SS. A 1.22-V reference is available for external loads up to 125 uA.

The TPS6755 is attractive for board-level dc/dc conversion in computer peripherals and in battery-powered equipment requiring high efficiency and low supply current.

Available in an 8-pin DIP or an 8-pin SOIC package, the TPS6755 operates over a free-air temperature range of - 40°C to 85°C.

The TPS6755 is an adjustable inverting dc/dc converter capable of operating from inputs as low as 2.7 V. The only external components required are an inductor, an output filter capacitor, an input filter capacitor, a reference filter capacitor, two resistors, and a Schottky rectifier. An enable input is provided to shut down the inverter when an output voltage is not needed. The typical supply current is 1.9 mA at no-load and is further reduced to 1-uA when the enable input is low.

The device features a 160-kHz current-mode pulse-width-modulation (PWM) controller with a p-channel MOSFET power switch. The gate drive uses the converter output to reduce the die area needed to realize the 0.4- MOSFET. Soft start is accomplished with the addition of one small capacitor at SS. A 1.22-V reference is available for external loads up to 125 uA.

The TPS6755 is attractive for board-level dc/dc conversion in computer peripherals and in battery-powered equipment requiring high efficiency and low supply current.

Available in an 8-pin DIP or an 8-pin SOIC package, the TPS6755 operates over a free-air temperature range of - 40°C to 85°C.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 4
類型 標題 日期
* Data sheet Adjustable Inverting DC/DC Converter datasheet (Rev. A) 1996年 12月 1日
Application note Understanding Inverting Buck-Boost Power Stages in Switch Mode Power Supplies (Rev. B) 2019年 3月 12日
User guide TSW2200 Multi-Output Power Supply Board (Rev. A) 2012年 12月 13日
Application note TPS6755 Evaluation Using the TSP6735EVM 2003年 5月 23日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

封裝 引腳 下載
PDIP (P) 8 檢視選項
SOIC (D) 8 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片