Many MSPM33 signals are made available
on multiple device pins. The following list describes the column headers:
- SIGNAL NAME: The name
of the signal which can be connected to one of the specified pins.
- PIN TYPE: The signal
direction and signal type:
- I = Input
- O = Output
- IO = Input, output,
or simultaneous input and output
- ID = Input with
open-drain behavior
- OD = Output with
open-drain behavior
- IOD = Input, output,
or simultaneous input and output with open-drain behavior
- A = Analog
- PWR = Power
function
- DESCRIPTION: A
description of the signal.
- PIN: Associated pin
number.
Note: The IOMUX only supports
connecting one IOMUX-managed digital function to the pin at the same time.
However, non-IOMUX managed signals (such as analog inputs and WAKE inputs) can
be enabled on a pin at the same time that an IOMUX managed digital function is
enabled on the pin. In this case, the designer must verify that no contention
exists between the functions enabled on each pin.
Note: The MP pin referes to the thermal disapation pad at the center of the
package.