SLASFL3 September 2026 DAC90802
PRODUCTION DATA
The DAC90802 voltage output is limited by the output range of the I-to-V to VOUT (as specified in Electrical Characteristics). Connect the voltage at VOUT to the feedback RFB maintaining output capacitance within the specified maximum CLOAD for high speed, stable performance of the internal I-to-V amplifier. Insert a series resistor to extend the usable CLOAD range.
Use the ROFS pin to introduce a coarse offset into the current output node of the DAC90802. The internal ROFS coarse offset resistor is matched to RDAC for a fixed gain . Use the VOSADJ pin to introduce a fine offset into the current output node of the DAC90802. The internal RVOS fine offset resistor is matched to RDAC for a fixed gain . Typical use of this adjustment includes calibration of small offsets for the DAC output.