Product details

Analog supply (min) (V) 2.7 Analog supply voltage (max) (V) 5.5 Speaker channels (max) Mono Architecture Class H Audio input type Analog Input Shutdown current (ISD) (µA) 0.1 PSRR (dB) 78 Iq (typ) (mA) 4 Operating temperature range (°C) -40 to 85 Rating Catalog
Analog supply (min) (V) 2.7 Analog supply voltage (max) (V) 5.5 Speaker channels (max) Mono Architecture Class H Audio input type Analog Input Shutdown current (ISD) (µA) 0.1 PSRR (dB) 78 Iq (typ) (mA) 4 Operating temperature range (°C) -40 to 85 Rating Catalog
DSBGA (YZR) 16 5.0625 mm² 2.25 x 2.25
  • Class H Topology
  • Integrated Boost Converter
  • Bridge-Tied Load (BTL) Output
  • Selectable Differential Inputs
  • Selectable Control Interfaces
    • (Hardware or Software mode)
  • I2C Programmable ALC
  • Low Supply Current
  • Minimum External Components
  • Micro-Power Shutdown
  • Available in Space-Saving DSBGA Package
  • Key Specifications:
    • Output Voltage at VDD = 3.6 V,
      RL = 1.5 µF + 10 Ω, THD+N ≤ 1%
      • 30 VP-P (Typical)
    • Quiescent Power Supply Current
      at 3.6 V (ALC Enabled)
      • 4 mA (Typical)
    • Power Dissipation at 25 VP–P, 1 W (Typical)
    • Shutdown Current, 0.1 µA (Typical)
  • Class H Topology
  • Integrated Boost Converter
  • Bridge-Tied Load (BTL) Output
  • Selectable Differential Inputs
  • Selectable Control Interfaces
    • (Hardware or Software mode)
  • I2C Programmable ALC
  • Low Supply Current
  • Minimum External Components
  • Micro-Power Shutdown
  • Available in Space-Saving DSBGA Package
  • Key Specifications:
    • Output Voltage at VDD = 3.6 V,
      RL = 1.5 µF + 10 Ω, THD+N ≤ 1%
      • 30 VP-P (Typical)
    • Quiescent Power Supply Current
      at 3.6 V (ALC Enabled)
      • 4 mA (Typical)
    • Power Dissipation at 25 VP–P, 1 W (Typical)
    • Shutdown Current, 0.1 µA (Typical)

The LM48560 device is a high voltage, high efficiency, Class H driver for ceramic speakers and piezo actuators. The LM48560 device’s Class H architecture offers significant power savings compared to traditional Class AB amplifiers. The device provides 30 VP–P output drive while consuming just 4 mA of quiescent current from a 3.6 V supply.

The LM48560 device features TI’s unique automatic level control (ALC) that provides output limiter functionality. The LM48560 device features two fully differential inputs with separate gain settings, and a selectable control interface. In software control mode, the gain control and device modes are configured through the I2C interface. In hardware control mode, the gain and input mux are configured through a pair of logic inputs.

The LM48560 device has a low power shutdown mode that reduces quiescent current consumption to 0.1 µA. The LM48560 device is available in an ultra-small 16-bump DSBGA package (1.97 mm × 1.97 mm).

The LM48560 device is a high voltage, high efficiency, Class H driver for ceramic speakers and piezo actuators. The LM48560 device’s Class H architecture offers significant power savings compared to traditional Class AB amplifiers. The device provides 30 VP–P output drive while consuming just 4 mA of quiescent current from a 3.6 V supply.

The LM48560 device features TI’s unique automatic level control (ALC) that provides output limiter functionality. The LM48560 device features two fully differential inputs with separate gain settings, and a selectable control interface. In software control mode, the gain control and device modes are configured through the I2C interface. In hardware control mode, the gain and input mux are configured through a pair of logic inputs.

The LM48560 device has a low power shutdown mode that reduces quiescent current consumption to 0.1 µA. The LM48560 device is available in an ultra-small 16-bump DSBGA package (1.97 mm × 1.97 mm).

Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 2
Type Title Date
* Data sheet LM48560 Boomer™ Audio Power Amplifier Series High Voltage Class H Ceramic Speaker Driver With Automatic Level Control datasheet (Rev. F) PDF | HTML 03 Dec 2015
EVM User's guide LM48560 Evaluation Board User's Guide 28 Dec 2015

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

LM48560TLEVAL — High Voltage Class H Ceramic Speaker Driver with Automatic Level Control

The LM48560TLEVAL provides an evaluation platform for the LM48560. The LM48560 is a high voltage, high efficiency, Class H driverfor ceramic speakers and piezo actuators. The LM48560's Class H architecture offers significant power savings compared to traditional Class AB amplifiers. The device (...)

User guide: PDF
Not available on TI.com
GUI for evaluation module (EVM)

SNAC051 LM48560TLEVAL GUI

Supported products & hardware

Supported products & hardware

Products
Piezo speaker drivers/receivers
LM48560 Mono, analog input, ceramic speaker driver with I2C control and integrated 30-V Class-H boost
Hardware development
Evaluation board
LM48560TLEVAL High Voltage Class H Ceramic Speaker Driver with Automatic Level Control
Simulation model

LM48560 PSpice Model

SNAM147.ZIP (21 KB) - PSpice Model
Simulation model

LM48560 TINA-TI Reference Design

SNAM144.TSC (2315 KB) - TINA-TI Reference Design
Simulation model

LM48560 TINA-TI Spice Model

SNAM143.ZIP (6 KB) - TINA-TI Spice Model
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Package Pins CAD symbols, footprints & 3D models
DSBGA (YZR) 16 Ultra Librarian

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos