Product details

Number of channels (#) 1 Output type Push-pull Propagation delay time (µs) 0.0025 Vs (Max) (V) 5.5 Vs (Min) (V) 2.4 Vos (offset voltage @ 25 C) (Max) (mV) 5 Iq per channel (Typ) (mA) 6 Input bias current (+/-) (Max) (nA) 5000 Rail-to-rail In-Out Rating Catalog Operating temperature range (C) -40 to 125 Features Hysteresis VICR (Max) (V) 5.7 VICR (Min) (V) -0.2 TI functional safety category Functional Safety-Capable
Number of channels (#) 1 Output type Push-pull Propagation delay time (µs) 0.0025 Vs (Max) (V) 5.5 Vs (Min) (V) 2.4 Vos (offset voltage @ 25 C) (Max) (mV) 5 Iq per channel (Typ) (mA) 6 Input bias current (+/-) (Max) (nA) 5000 Rail-to-rail In-Out Rating Catalog Operating temperature range (C) -40 to 125 Features Hysteresis VICR (Max) (V) 5.7 VICR (Min) (V) -0.2 TI functional safety category Functional Safety-Capable
SOT-SC70 (DCK) 5 4 mm² 2 x 2.1

The TLV3601 and TLV3603 are 325 MHz, high-speed comparators with rail-to-rail inputs and a propagation delay of 2.5 ns. The combination of fast response and wide operating voltage range make the comparators suitable for narrow signal pulse detection and data and clock recovery applications in LIDAR, range finders, and line receivers.

The push-pull (single-ended ) outputs of the TLV3601 and TLV3603 simplify and save cost on board-to-board wiring for I/O interfaces while reducing power consumption when compared to alternative high-speed differential output comparators. They can directly interface most prevailing digital controllers and IO expanders in the downstream circuit.

The TLV3601 is available in tiny 5-pin SC70 package which makes it well suited for space constrained equipment. TLV3603 is packaged in a 6-pin SC70 package and maintains the same speed and size as TLV3601 while offering the additional features of adjustable hysteresis control and output latch capability.

The TLV3601 and TLV3603 are 325 MHz, high-speed comparators with rail-to-rail inputs and a propagation delay of 2.5 ns. The combination of fast response and wide operating voltage range make the comparators suitable for narrow signal pulse detection and data and clock recovery applications in LIDAR, range finders, and line receivers.

The push-pull (single-ended ) outputs of the TLV3601 and TLV3603 simplify and save cost on board-to-board wiring for I/O interfaces while reducing power consumption when compared to alternative high-speed differential output comparators. They can directly interface most prevailing digital controllers and IO expanders in the downstream circuit.

The TLV3601 is available in tiny 5-pin SC70 package which makes it well suited for space constrained equipment. TLV3603 is packaged in a 6-pin SC70 package and maintains the same speed and size as TLV3601 while offering the additional features of adjustable hysteresis control and output latch capability.

Download

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 4
Type Title Date
* Data sheet TLV3601, TLV3603 325 MHz High-Speed Comparator with 2.5 ns Propagation Delay datasheet (Rev. A) 02 Sep 2021
Functional safety information TLV3601 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA 02 Sep 2021
Application note Signal and clock recovery comparator circuit (Rev. A) 22 Jun 2021
User guide TLV3601EVM User's Guide 10 May 2021

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TLV3601EVM — TLV3601 evaluation module high-speed comparator with push-pull outputs

TLV3601EVM is an evaluation module (EVM) designed to evaluate the high-speed TLV3601 and TLV3603 comparators. The EVM has layout options to make it simple to evaluate the performance with different measurement tools. The PCB footprint for the comparator accommodates either the 5-pin SC70 TLV3601 or (...)
Not available
Simulation model

TLV3601 TINA-TI Model

SNOM713.ZIP (5 KB) - TINA-TI Spice Model
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Simulation tool

TINA-TI — SPICE-based analog simulation program

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Package Pins Download
SC70 (DCK) 5 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos