NEU

DAC39RFS10-SEP

Name: DAC39RFS10-SEP
Brand: TI
SKU: DAC39RFS10-SEP
Price: 13499 USD

AKTIV

Strahlungstoleranter, DADigital-Analog-Wandler mit 30 krad, 16 Bit, ein Kanal, 10,4 GS/s, 12 GHz HF

Jetzt bestellen

Datenblatt

document-pdfAcrobat DAC39RFx10-SP DAC39RFx10-SEP 10.4 or 20.8GSPS, 16-bit, Dual and Single Channel, Multi-Nyquist Digital-to-Analog Converter (DAC) with JESD204C Interface datasheet (Englisch) PDF | HTML

DAC39RFS10-SEP

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Resolution (Bits)

16

Number of DAC channels

1

Interface type

JESD204B, JESD204C

Sample/update rate (Msps)

10400, 20800

Features

Ultra High Speed

Rating

Catalog

Interpolation

128x, 12x, 16x, 192x, 1x, 24x, 256x, 2x, 32x, 3x, 48x, 4x, 64x, 6x, 8x, 96x

Power consumption (typ) (mW)

2800

SFDR (dB)

85

Architecture

Current Source

Operating temperature range (°C)

-55 to 125

Reference type

Ext, Int

Resolution (Bits)

16

Number of DAC channels

1

Interface type

JESD204B, JESD204C

Sample/update rate (Msps)

10400, 20800

Features

Ultra High Speed

Rating

Catalog

Interpolation

128x, 12x, 16x, 192x, 1x, 24x, 256x, 2x, 32x, 3x, 48x, 4x, 64x, 6x, 8x, 96x

Power consumption (typ) (mW)

2800

SFDR (dB)

85

Architecture

Current Source

Operating temperature range (°C)

-55 to 125

Reference type

Ext, Int

FCBGA (ACL)

256

289 mm² 17 x 17

Radiation hardness assured DAC39RFx10-SP:
- Single event upset (SEU) immune registers
- Single-event latch up (SEL): 120MeV-cm2/mg
- RLAT Total ionizing dose (TID): 300krad (Si)
Radiation tolerant DAC39RFx10-SEP:
- Single event upset (SEU) immune registers
- Single-event latch up (SEL): 43MeV-cm2/mg
- RLAT Total ionizing dose (TID): 30krad (Si)
16-bit, 10.4 or 20.8GSPS, multi-Nyquist DAC Cores
Maximum input data rate:
- 8-bit, Single channel, DES mode: 20.8GSPS
- 12-bit, Single channel, DES mode: 15.5GSPS
- 16-bit, Single channel: 10.4GSPS
- 8-bit, Dual channel, 10.4GSPS
- 12-bit, Dual channel: 7.75GSPS/ch
- 16-bit, Dual channel: 6.2GSPS/ch
Output bandwidth (-3dB): 12GHz
Performance at fOUT = 2.997GHz, DES2XL mode, DEM/Dither off
- Noise floor (small signal): –155dBFS/Hz
- SFDR (-0.1dBFS) : 60dBc
- IMD3 (-7dBFS each tone) : –62dBc
- Additive phase noise, 10kHz offset: -138dBc/Hz
Four Integrated digital up-converters (DUC)
- Interpolation: 1x, 2x, 3x, 4x, 6x, 8x, 12x ... 256x
- Complex baseband DUC for I/Q output
- Complex to real up conversion for dual channel direct RF sampling
- 64-bit frequency resolution NCOs
JESD204C Interface
- Up to 16 Lanes at up to 12.8Gbps
- Class C-S, subclass-1 Compatible
- Internal AC coupling capacitors
SYSREF Windowing for automatic SYSREF timing calibration
Space screening and assurance:
- Meets ASTM E595 outgassing specification
- One fabrication, assembly, and test site
- Wafer lot traceability
- Extended product life cycle
- Radiation lot acceptance test (RLAT)
- Production burn-in (DAC39RFx10-SP only)

Radiation hardness assured DAC39RFx10-SP:
- Single event upset (SEU) immune registers
- Single-event latch up (SEL): 120MeV-cm2/mg
- RLAT Total ionizing dose (TID): 300krad (Si)
Radiation tolerant DAC39RFx10-SEP:
- Single event upset (SEU) immune registers
- Single-event latch up (SEL): 43MeV-cm2/mg
- RLAT Total ionizing dose (TID): 30krad (Si)
16-bit, 10.4 or 20.8GSPS, multi-Nyquist DAC Cores
Maximum input data rate:
- 8-bit, Single channel, DES mode: 20.8GSPS
- 12-bit, Single channel, DES mode: 15.5GSPS
- 16-bit, Single channel: 10.4GSPS
- 8-bit, Dual channel, 10.4GSPS
- 12-bit, Dual channel: 7.75GSPS/ch
- 16-bit, Dual channel: 6.2GSPS/ch
Output bandwidth (-3dB): 12GHz
Performance at fOUT = 2.997GHz, DES2XL mode, DEM/Dither off
- Noise floor (small signal): –155dBFS/Hz
- SFDR (-0.1dBFS) : 60dBc
- IMD3 (-7dBFS each tone) : –62dBc
- Additive phase noise, 10kHz offset: -138dBc/Hz
Four Integrated digital up-converters (DUC)
- Interpolation: 1x, 2x, 3x, 4x, 6x, 8x, 12x ... 256x
- Complex baseband DUC for I/Q output
- Complex to real up conversion for dual channel direct RF sampling
- 64-bit frequency resolution NCOs
JESD204C Interface
- Up to 16 Lanes at up to 12.8Gbps
- Class C-S, subclass-1 Compatible
- Internal AC coupling capacitors
SYSREF Windowing for automatic SYSREF timing calibration
Space screening and assurance:
- Meets ASTM E595 outgassing specification
- One fabrication, assembly, and test site
- Wafer lot traceability
- Extended product life cycle
- Radiation lot acceptance test (RLAT)
- Production burn-in (DAC39RFx10-SP only)

The DAC39RF10-Sx and ’RFS10-Sx are a family of dual and single channel digital-to-analog converters (DAC) with 16-bit resolution. The devices can be used as non-interpolating or interpolating DACs for either direct RF sampling or complex baseband signal generation. The maximum input data rate is 20.8GSPS for a single channel or 10.4 GSPS for two channels. The devices can generate signals of up to 10, 7.5, and 5GHz signal bandwidth (8, 12, and 16-bit input resolution) at carrier frequencies exceeding 10GHz enabling direct sampling in X-band.

The high sampling rate, output frequency range, 64-bit NCO frequency resolution and any frequency hopping with phase coherence also makes the DAC39RF10-Sx and ’RFS10-Sx capable of arbitrary waveform generation (AWG) and direct digital synthesis (DDS).

A JESD204B and JESD204C compatible serial interface has 16 receiver pairs capable of up to 12.8Gbps. The interface is JESD204B and JESD204C subclass-1 compliant for deterministic latency and multi-device synchronization through the use of SYSREF.

The DAC39RF10-Sx and ’RFS10-Sx are a family of dual and single channel digital-to-analog converters (DAC) with 16-bit resolution. The devices can be used as non-interpolating or interpolating DACs for either direct RF sampling or complex baseband signal generation. The maximum input data rate is 20.8GSPS for a single channel or 10.4 GSPS for two channels. The devices can generate signals of up to 10, 7.5, and 5GHz signal bandwidth (8, 12, and 16-bit input resolution) at carrier frequencies exceeding 10GHz enabling direct sampling in X-band.

The high sampling rate, output frequency range, 64-bit NCO frequency resolution and any frequency hopping with phase coherence also makes the DAC39RF10-Sx and ’RFS10-Sx capable of arbitrary waveform generation (AWG) and direct digital synthesis (DDS).

A JESD204B and JESD204C compatible serial interface has 16 receiver pairs capable of up to 12.8Gbps. The interface is JESD204B and JESD204C subclass-1 compliant for deterministic latency and multi-device synchronization through the use of SYSREF.

open-in-new

Andere Highspeed-DACs (> 10 MSPSS) suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 1

	Typ	Titel		Datum
*	Data sheet	DAC39RFx10-SP DAC39RFx10-SEP 10.4 or 20.8GSPS, 16-bit, Dual and Single Channel, Multi-Nyquist Digital-to-Analog Converter (DAC) with JESD204C Interface datasheet	PDF \| HTML	25 Mär 2024

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

DAC39RF10EVM — DAC39RF10-Evaluierungsmodul

DAC39RF10EVM ist eine Evaluierungsplatine für die Evaluierung der Digital-Analog-Wandler (DAC) DAC39RF10 von Texas Instruments. DAC39RF10 ist ein zweikanaliger 16/8-Bit-DAC. DAC39RF10 ist eine Familie von Ein- und Zweikanal-Digital-Analog-Wandlern (DAC) mit 16-Bit Auflösung. Die Bausteine können (...)

Benutzerhandbuch: PDF | HTML

Nicht verfügbar auf TI.com

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)

Anfordern

Gehäuse	Pins	Herunterladen
FCBGA (ACL)	256	Optionen anzeigen

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

DAC39RFS10-SEP

Strahlungstoleranter, DADigital-Analog-Wandler mit 30 krad, 16 Bit, ein Kanal, 10,4 GS/s, 12 GHz HF

DAC39RFS10-SEP

Produktdetails

Technische Dokumentation

Design und Entwicklung

DAC39RF10EVM — DAC39RF10-Evaluierungsmodul

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos