Suitable for IEEE Standard 896 Applications
SN75ALS056 is an Octal Transceiver
SN75ALS057 is a Quad Transceiver
High-Speed Advanced Low-Power Schottky (ALS) Circuitry
Low Power Dissipation:
52.5 mW/Channel Max
High-Impedance pnp Inputs
Logic-Level 1-V Bus Swing Reduces Power Consumption
Trapezoidal Bus Output Waveform Reduces Noise Coupling to Adjacent Lines
Power-Up/Power-Down Protection
(Glitch Free)
Open-Collector Driver Outputs Allow Wired-OR Connections
Designed to Be a Faster, Lower-Power Functional Equivalent of National DS3896, DS3897

The transceivers are suitable for IEEE Standard 896 applications to the extent of the operating conditions and characteristics specified in this data sheet.

Suitable for IEEE Standard 896 Applications
SN75ALS056 is an Octal Transceiver
SN75ALS057 is a Quad Transceiver
High-Speed Advanced Low-Power Schottky (ALS) Circuitry
Low Power Dissipation:
52.5 mW/Channel Max
High-Impedance pnp Inputs
Logic-Level 1-V Bus Swing Reduces Power Consumption
Trapezoidal Bus Output Waveform Reduces Noise Coupling to Adjacent Lines
Power-Up/Power-Down Protection
(Glitch Free)
Open-Collector Driver Outputs Allow Wired-OR Connections
Designed to Be a Faster, Lower-Power Functional Equivalent of National DS3896, DS3897

The transceivers are suitable for IEEE Standard 896 applications to the extent of the operating conditions and characteristics specified in this data sheet.

The SN75ALS056 is an eight-channel, monolithic, high-speed, advanced low-power Schottky (ALS) device designed for two-way data communication in a densely populated backplane. The SN75ALS057 is a four-channel version with independent driver-input (Dn) and receiver-output (Rn) pins and a separate driver disable for each driver (En).

These transceivers feature open-collector driver outputs with series Schottky diodes to reduce capacitive loading to the bus. By using a 2-V pullup termination on the bus, the output signal swing is approximately 1 V, which reduces the power necessary to drive the bus load capacitance. The driver outputs generate trapezoidal waveforms that reduce crosstalk between channels. The drivers are capable of driving an equivalent dc load as low as 18.5 . The receivers have internal low-pass filters to further improve noise immunity.

The SN75ALS056 and SN75ALS057 are characterized for operation from 0°C to 70°C.

The SN75ALS056 is an eight-channel, monolithic, high-speed, advanced low-power Schottky (ALS) device designed for two-way data communication in a densely populated backplane. The SN75ALS057 is a four-channel version with independent driver-input (Dn) and receiver-output (Rn) pins and a separate driver disable for each driver (En).

These transceivers feature open-collector driver outputs with series Schottky diodes to reduce capacitive loading to the bus. By using a 2-V pullup termination on the bus, the output signal swing is approximately 1 V, which reduces the power necessary to drive the bus load capacitance. The driver outputs generate trapezoidal waveforms that reduce crosstalk between channels. The drivers are capable of driving an equivalent dc load as low as 18.5 . The receivers have internal low-pass filters to further improve noise immunity.

The SN75ALS056 and SN75ALS057 are characterized for operation from 0°C to 70°C.

open-in-new

Andere Andere Schnittstellen suchen

Herunterladen Video mit Transkript ansehen Video

Alle anzeigen 1

	Typ	Titel		Datum
*	Data sheet	Trapezoidal-Waveform Interface Bus Transceivers datasheet (Rev. G)		01 Jun 1998

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)

Anfordern

Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)

Benutzerhandbuch: PDF

Optionen anzeigen

Gehäuse	Pins	Herunterladen
SOIC (DW)	20	Optionen anzeigen

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

SN75ALS057

Schnittstellen-Bus-Transceiver mit trapezförmiger Ausgangs-Kurvenform

SN75ALS057

Produktdetails

Ähnliche Produkte, die für Sie interessant sein könnten

Ähnliche Funktionalität wie verglichener Baustein

Technische Dokumentation

Design und Entwicklung

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos