(1)Thermal performance must be considered
The TPS22810 is a single channel load switch with configurable rise time and with an integrated quick output discharge (QOD). In addition, the device features thermal shutdown to protect the device against high junction temperature. Because of this, safe operating area of the device is inherently ensured. The device contains an N-channel MOSFET that can operate over an input voltage range of 2.7 V to 18 V. SOT23-5 (DBV) package can support a maximum current of 2 A. WSON (DRV) package can support a maximum current of 3 A. The switch is controlled by an on and off input, which is capable of interfacing directly with low-voltage control signals.
The configurable rise time of the device greatly reduces inrush current caused by large bulk load capacitances, thereby reducing or eliminating power supply droop. Undervoltage lock-out is used to turn off the device if the VIN voltage drops below a threshold value, ensuring that the downstream circuitry is not damaged by being supplied by a voltage lower than intended. The configurable QOD pin controls the fall time of the device to allow design flexibility for power down.
The TPS22810 is available in a leaded, SOT-23 package (DBV) which allows to visually inspect solder joints, as well as a WSON package (DRV). The device is characterized for operation over the free-air temperature range of –40˚C to +105˚C.
| Tipo | Título | Fecha | ||
|---|---|---|---|---|
| * | Data sheet | TPS22810, 2.7-18-V, 79-mΩ On-Resistance Load Switch With Thermal Protection datasheet (Rev. C) | PDF | HTML | 17 ene 2018 |
| E-book | 11 Ways to Protect Your Power Path | 03 jul 2019 | ||
| Application note | Basics of Power Switches (Rev. A) | PDF | HTML | 26 abr 2019 | |
| Application note | Load Switch Thermal Considerations (Rev. A) | 11 oct 2018 | ||
| Application note | Basics of Load Switches (Rev. A) | 05 sep 2018 | ||
| Application note | Selecting a Load Switch to Replace a Discrete Solution | 30 abr 2017 | ||
| Application note | Timing of Load Switches | 27 abr 2017 | ||
| Application note | Fundamentals of On-Resistance in Load Switches | 09 jun 2016 | ||
| Application note | Managing Inrush Current (Rev. A) | 28 may 2015 |
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
The AM2x BLDC Servo Motor BoosterPack plug-in module is an add-on for the AM2x LaunchPad development kits. This BoosterPack provides up to two axes of 24V/8A BLDC driver, ADC/SDFM current feedback, industrial absolute encoder, and resolver feedback.
El módulo de evaluación (EVM) TPS22810 es un circuito ensamblado y probado para evaluar los interruptores de carga TPS22810. El TPS22810EVM permite al usuario aplicar diferentes voltajes de entrada (de 2.7 V a 18 V) bajo distintas condiciones de carga (de 0 A a 2 A) al TPS22810. Las conexiones de (...)
| Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
|---|---|---|
| SOT-23 (DBV) | 6 | Ultra Librarian |
| WSON (DRV) | 6 | Ultra Librarian |
Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.