Inicio Gestión de la energía AC/DC & DC/DC converters (integrated FET)
Inicio
Gestión de la energía
AC/DC & DC/DC converters (integrated FET)

TPS62864

ACTIVO

Convertidor reductor síncrono de 4 A con interfaz I2C en encapsulado WCSP de 1.05 mm × 1.78 mm

Haga su pedido ahora
Hoja de datos

TPS62864

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Iout (max) (A) 4 Vin (min) (V) 2.5 Vin (max) (V) 5.5 Topology Buck Type Converter Switching frequency (min) (kHz) 2160 Switching frequency (max) (kHz) 2640 Features Adaptive/Dynamic Voltage Scaling, Enable, Forced PWM, I2C/PMBus, Light load efficiency, Output discharge, Over Current Protection, Power good, Soft Start Fixed, Synchronous Rectification, UVLO fixed, VID Interface Control mode DCS-Control Vout (min) (V) 0.4 Vout (max) (V) 1.675 Rating Catalog Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000005
Iout (max) (A) 4 Vin (min) (V) 2.5 Vin (max) (V) 5.5 Topology Buck Type Converter Switching frequency (min) (kHz) 2160 Switching frequency (max) (kHz) 2640 Features Adaptive/Dynamic Voltage Scaling, Enable, Forced PWM, I2C/PMBus, Light load efficiency, Output discharge, Over Current Protection, Power good, Soft Start Fixed, Synchronous Rectification, UVLO fixed, VID Interface Control mode DCS-Control Vout (min) (V) 0.4 Vout (max) (V) 1.675 Rating Catalog Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000005
DSBGA (YCG) 15 1.8375 mm² 1.75 x 1.05
  • 7-mΩ and 6.5-mΩ internal power MOSFETs
  • >90% efficiency (0.9-V output)
  • DCS-control topology for fast transient response
  • 1% output voltage accuracy
  • 4-µA operating quiescent current
  • 2.4-V to 5.5-V input voltage range
  • 2.4-MHz switching frequency
  • Selection by external resistor
    • Start-up output voltage
    • I2C slave address
  • Selection by I2C interface
    • Power save mode or forced PWM mode
    • Output discharge
    • Hiccup or latching short-circuit protection
    • Output voltage ramp speed
  • VID pin for dynamic voltage scaling (DVS)
  • Thermal pre-warning and thermal shutdown
  • Power good indicator pin option
  • I2C-compatible interface up to 3.4 Mbps
  • Available in 1.05-mm x 1.78-mm x 0.5-mm 15-pin WCSP package with 0.35-mm pitch
  • Create a custom design using the TPS62866 with the WEBENCH® Power Designer
  • 7-mΩ and 6.5-mΩ internal power MOSFETs
  • >90% efficiency (0.9-V output)
  • DCS-control topology for fast transient response
  • 1% output voltage accuracy
  • 4-µA operating quiescent current
  • 2.4-V to 5.5-V input voltage range
  • 2.4-MHz switching frequency
  • Selection by external resistor
    • Start-up output voltage
    • I2C slave address
  • Selection by I2C interface
    • Power save mode or forced PWM mode
    • Output discharge
    • Hiccup or latching short-circuit protection
    • Output voltage ramp speed
  • VID pin for dynamic voltage scaling (DVS)
  • Thermal pre-warning and thermal shutdown
  • Power good indicator pin option
  • I2C-compatible interface up to 3.4 Mbps
  • Available in 1.05-mm x 1.78-mm x 0.5-mm 15-pin WCSP package with 0.35-mm pitch
  • Create a custom design using the TPS62866 with the WEBENCH® Power Designer

The TPS62864 and TPS62866 devices are high-frequency synchronous step-down converters with I2C interface which provide an efficient, adaptive, and high power-density solution. At medium to heavy loads, the converter operates in PWM mode and automatically enters Power Save Mode operation at light load to maintain high efficiency over the entire load current range. The device can also be forced in PWM mode operation for smallest output voltage ripple. Together with its DCS-control architecture, excellent load transient performance and tight output voltage accuracy are achieved. Via the I2C interface and a dedicated VID pin, the output voltage is quickly adjusted to adapt the power consumption of the load to the ever-changing performance needs of the application.

The TPS62864 and TPS62866 devices are high-frequency synchronous step-down converters with I2C interface which provide an efficient, adaptive, and high power-density solution. At medium to heavy loads, the converter operates in PWM mode and automatically enters Power Save Mode operation at light load to maintain high efficiency over the entire load current range. The device can also be forced in PWM mode operation for smallest output voltage ripple. Together with its DCS-control architecture, excellent load transient performance and tight output voltage accuracy are achieved. Via the I2C interface and a dedicated VID pin, the output voltage is quickly adjusted to adapt the power consumption of the load to the ever-changing performance needs of the application.
open-in-new Buscar otro/a AC/DC & DC/DC converters (integrated FET)
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 9
Tipo Título Fecha
* Data sheet TPS62864/6 2.4-V to 5.5-V Input, 4-A and 6-A Synchronous Step-Down Converter with I2C Interface in WCSP Package datasheet (Rev. C) PDF | HTML 01 oct 2020
Application note Benefiting from Step-Down Converters with an I2C Communication Interface (Rev. B) PDF | HTML 29 nov 2023
Application note Intro to Multi-Function Pins and Their Applications in TI Step-Down Converters (Rev. A) PDF | HTML 17 nov 2022
Application note Understanding SOA Curves to Operate at High Output Currents and Temperature PDF | HTML 05 may 2022
Selection guide Buck Converter Quick Reference Guide (Rev. B) 08 abr 2021
White paper Enabling Higher Data Rates for Optical Modules With Small and Efficient Power 22 mar 2021
White paper Benefits of a Resistor-to-Digital Converter in Ultra-Low Power Supplies 14 oct 2019
Technical article Layout matters: solving pinout assignment issues for DC/DC converters in WCSP pack PDF | HTML 17 jul 2019
Analog Design Journal Methods of output-voltage adjustment for DC/DC converters 14 jun 2019

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS62866EVM-051 — Módulo de evaluación de convertidor reductor de alta densidad de potencia de 6 A con interfaz I2C

The TPS62866EVM-051 evaluation module (EVM) facilitates the evaluation of the TPS62866 6-A, step-down converter in a small 1.05-mm by 1.78-mm WCSP package with 0.5-mm pitch. The EVM has a programmable output of 0.4 V to 1.675 V via I2C with 1% accuracy from input voltages between 2.4 V to 5.5 V. (...)

Guía del usuario: PDF | HTML
No disponible en TI.com
GUI para el módulo de evaluación (EVM)

SLUC676 — TPS62866EVM GUI for Windows

Productos y hardware compatibles

Productos y hardware compatibles

Productos
AC/DC & DC/DC converters (integrated FET)
TPS62864 — Convertidor reductor síncrono de 4 A con interfaz I2C en encapsulado WCSP de 1.05 mm × 1.78 mm TPS62866 — Convertidor reductor síncrono de 5.5 V y 6 A con interfaz I2C en encapsulado WCSP de 1.05 mm × 1.78 
Descargar
GUI para el módulo de evaluación (EVM)

SLUC677 — TPS62866EVM GUI for MacOS

Productos y hardware compatibles

Productos y hardware compatibles

Productos
AC/DC & DC/DC converters (integrated FET)
TPS62864 — Convertidor reductor síncrono de 4 A con interfaz I2C en encapsulado WCSP de 1.05 mm × 1.78 mm TPS62866 — Convertidor reductor síncrono de 5.5 V y 6 A con interfaz I2C en encapsulado WCSP de 1.05 mm × 1.78 
Descargar
GUI para el módulo de evaluación (EVM)

SLUC678 — TPS62866EVM GUI for Linux

Productos y hardware compatibles

Productos y hardware compatibles

Productos
AC/DC & DC/DC converters (integrated FET)
TPS62864 — Convertidor reductor síncrono de 4 A con interfaz I2C en encapsulado WCSP de 1.05 mm × 1.78 mm TPS62866 — Convertidor reductor síncrono de 5.5 V y 6 A con interfaz I2C en encapsulado WCSP de 1.05 mm × 1.78 
Descargar
Modelo de simulación

TPS62864 PSpice Unencrypted Transient Model (Rev. B)

SLUM687B.ZIP (95 KB) - PSpice Model
Descargar
Modelo de simulación

TPS628640B PSpice Unencrypted Transient Model

SLUM742.ZIP (279 KB) - PSpice Model
Descargar
Modelo de simulación

TPS62866 PSpice Unencrypted Transient Model (Rev. B)

SLUM686B.ZIP (101 KB) - PSpice Model
Descargar
Diseños de referencia

TIDA-050044 — Diseño de referencia de fuente de alimentación pequeña y eficiente para SSD de factor de forma M.2

This small and efficient power supply reference design is for M.2 form factor client solid state drives (SSD). This design uses three DC/DC converters and a single linear converter. Furthermore, one of the outputs offers the flexibility to change the output voltage through I²C communication. 
Design guide: PDF
Esquema: PDF
Paquete Pasadores Descargar
DSBGA (YCG) 15 Ver opciones
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos