DS160PR410-Q1
- Four-channel linear redriver supporting PCIe® 4.0
- Backward compatible to PCIe 3.0, 2.0, 1.0
- Protocol agnostic linear equalizer supporting most AC coupled interfaces up to 20Gbps
- Integrated two 2x2 Crosspoint mux function
- 12dB PCIe 4.0 reach extension over PVT with 16dB CTLE boost
- Ultra-low latency of 100ps
- Excellent performance at 16Gbps (8GHz Nyquist)
- -15 / -20dB Rx / Tx return loss
- 1200mV AC linearity
- High BW resulting excellent linear EQ curves
- Single 3.3V supply with 160mW/chan active power
- Immunity to supply noise with internal voltage regulator
- Automatic receiver detection for PCIe use cases
- Linear redriver allows seamless support for PCIe link training
- Support for x4, x8, x16 bus width in pin mode, and x1, x2, x4, x8, x16 in I2C mode
- Pin-strap, SMBus or EEPROM programming
- 18 EQ boost 5 flat gain settings
- –40 to 105°C (grade 2) ambient temperature support without heatsink
- 5mm x 7mm automotive friendly package with 0.5 mm pitch and wettable flank
The DS160PR410-Q1 is a four channel low-power high-performance linear redriver with integrated two 2x2 cross-point mux designed to support PCIe® 4.0 and other interfaces up to 20Gbps.
The DS160PR410-Q1 receivers deploy continuous time linear equalizers (CTLE) to provide a programmable high-frequency boost. The equalizer can open an input eye that is completely closed due to inter-symbol interference (ISI) induced by an interconnect medium, such as PCB traces. The CTLE receiver is followed by a linear output driver. The linear data-paths of DS160PR410-Q1 preserve transmit preset signal characteristics. The linear redriver becomes part of the passive channel that as a whole get link trained for best transmit and receive equalization settings. This transparency in the link training protocol results in best electrical link and lowest possible latency. Low channel-channel cross-talk, low additive jitter and excellent return loss makes the device almost a passive element in the link, but with its useful equalization. The data-path of the device uses an internally regulated power rail that provides high immunity to any supply noise on the board. The device also has low AC and DC gain variation providing consistent equalization in high volume platform deployment.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | DS160PR410-Q1 PCIe 4.0 Automotive 4-Channel Linear Redriver datasheet | PDF | HTML | 2025/09/25 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGF) | 40 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.