LP8727
- USB Multiplexing
Switches
- High-Speed USB on USB and UART Inputs
- Negative Voltage Rail on Audio Inputs
- Internal LDO for ID Detection and MIC Bias
- Compatible with USB Charging Specification Rev. 1.1
- DSS Input for Default Switch Connection
- Low-Power MIC Standby Mode
- Linear Charge with Single
Input
- 28 OVP on VBUS Input
- High-Current Mode for Production Test
- Thermal Regulation
- Over-Voltage Protected LDO for USB Transceivers and PMU Wakeup
- UVLO (Undervoltage Lock Out)
- Interrupt Request to Reduce SW Polling
- USB / ID Detection
- SEND / END Button Detection
- Mic Removal
- OVLO / UVLO on VBUS
- Charger Status
- Thermal Shutdown Protection
- I2C-compatible Serial Interface
- 25-Bump 0.4 mm Pitch Thin DSBGA Package
All trademarks are the property of their respective owners.
The LP8727 is designed to provide automatic multiplexing switches between Micro/Mini USB connector and USB, UART and Audio paths in cellular phone applications. It also contains a single-input Li-Ion battery charger and an overvoltage-protected LDO. Programming is handled via an I2C-compatible Serial Interface allowing control of charger, multiplexing switches, and reading status information of the device.
The multiplexing switches on USB and UART support high-speed USB, and Audio inputs can be driven to negative voltage rail. The LP8727 is compatible with USB charging specifications rev 1.1 from USB IF.
The Li-Ion charger requires few external components and integrates the power FET. Charging is thermally regulated to obtain the most efficient charging rate for a given ambient temperature. It has Overvoltage Protection (OVP) circuit at the charger input protects the PMU from input voltages up to +28V, eliminating the need for any external protection circuitry.
An overvoltage-protected LDO which can supply up to 50 mA is designed for powering up a low-voltage USB transceiver or waking up a PMU (Power Management Unit) when an external power source (either USB VBUS or wall adapter) is connected to the USB connector.
The LP8727 PMU is available in 25-bump 0.4 mm pitch thin DSBGA package (2.015 mm x 2.015 mm).
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | LP8727 Micro/Mini USB Interface with Integrated 28V Charger datasheet (Rev. A) | 2013. 5. 3 | ||
| 애플리케이션 노트 | High-Speed Interface Layout Guidelines (Rev. J) | PDF | HTML | 2023. 2. 24 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LP8727SW-LINUX — LP8727용 Linux 드라이버
The Linux driver supports the LP8727 USB interface with integrated 28-V linear charger. The Linux driver supports communication through the I2C bus and interfaces with the power-supply subsystem.
Linux mainline status
Available in Linux Mainline: Yes
Available through git.ti.com: N/A
Supported (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| DSBGA (YFQ) | 25 | Ultra Librarian |