MSPM0G3529-Q1
512KB 플래시, 128KB SRAM, CAN-FD 2개, ADC 2개, DAC 및 COMP를 지원하는 차량용 80MHz ARM® Cortex®-M0+ MCU
MSPM0G3529-Q1
- Core
- Arm 32-bit Cortex M0+ CPU with memory protection unit, frequency up to 80MHz
- Functional Safety-Compliant targeted
-
Developed for functional safety applications
- Documentation to aid ISO 26262 system design will be available
-
Systematic capability up to ASIL B targeted
-
- PSA-L1 Certification targeted
- Operating characteristics
- Extended temperature: –40°C up to 125°C
- Wide supply voltage range: 1.62V to 3.6V
- Memories
- Up to 512KB of flash memory with error correction code (ECC)
-
Dual-bank with address swap for OTA updates
-
- 16KB data flash bank with ECC protection
- 128KB total SRAM
- SRAM (Bank 0): 64kB SRAM with ECC protection or hardware parity, and retention down to STANDBY mode
- SRAM (Bank 1): 64kB SRAM with retention down to STOP mode
- Up to 512KB of flash memory with error correction code (ECC)
- High-performance analog peripherals
- Two simultaneous sampling 12-bit 4Msps analog-to-digital converters (ADC) with up to 27 external channels
- 14-bit effective resolution at 250ksps with hardware averaging
- Three high-speed comparators (COMP) with integrated 8-bit reference DACs
- 32ns propagation delay in high-speed mode
- Support low-power mode operation down to <1µA
- One 12-bit 1Msps digital-to-analog converter (DAC) with integrated output buffer
- Programmable analog connections between ADC, COMP and DAC
- Configurable 1.4V or 2.5V internal shared voltage reference (VREF)
- Integrated temperature sensor
- Two simultaneous sampling 12-bit 4Msps analog-to-digital converters (ADC) with up to 27 external channels
- Optimized low-power modes
- RUN: 123µA/MHz (CoreMark)
- SLEEP: 38µA/MHz
- STOP: 223µA at 4MHz
- STANDBY: 1.7µA at 32kHz with RTC and SRAM Bank 0 and state retention
- SHUTDOWN: 92nA with IO wake-up capability
- Intelligent digital peripherals
- 12-channel DMA controller
- Math accelerator supports DIV, SQRT, MAC and TRIG computations
- Nine timers support up to 28 PWM channels
- Two 16-bit general-purpose timers support QEI
- Four 16-bit general-purpose timers support low-power operation in STANDBY mode
- One 32-bit general-purpose timer
- Two 16-bit advanced timers with deadband support and complimentary outputs up to 12 PWM channels
- Two windowed watchdog timers (WWDT), one independent watchdog timer (IWDT)
- RTC with alarm and calendar mode
- Enhanced communication interfaces
- Seven UART interfaces
- Two supporting LIN, IrDA, DALI, Smart Card, Manchester
- Three supporting low-power operation in STANDBY mode
- Three I2C interfaces supporting up to FM+ (1Mbit/s), SMBus/PMBus, and wakeup from STOP mode
- Three SPI interfaces, with one supporting up to 32Mbits/s
- Two Controller Area Network (CAN) interfaces support CAN 2.0 A or B and CAN-FD
- Seven UART interfaces
- Clock system
- Internal 4 to 32MHz oscillator (SYSOSC) with up to ±1.2% accuracy
- Phase-locked loop (PLL) up to 80MHz
- Internal 32kHz low-frequency oscillator (LFOSC) with ±3% accuracy
- External 4 to 48MHz crystal oscillator (HFXT)
- External 32kHz crystal oscillator (LFXT)
- External clock input
- Data integrity and encryption
- AES-128/256 accelerator with support for GCM/GMAC, CCM/CBC-MAC, CBC, CTR
- Secure key storage for up to four AES keys
- Flexible firewalls for protecting code and data
- True random number generator (TRNG)
- Cyclic redundancy checker (CRC-16, CRC-32)
- Flexible I/O features
- Up to 94 GPIOs
- Two 5V-tolerant open-drain IOs
- Three high-drive IOs with 20mA drive strength
- Four high-speed IOs
- Up to 94 GPIOs
- Development support
- 2-pin serial wire debug (SWD)
- Package options
- 64-pin LQFP (PM) (0.5mm pitch)
- Family members (also see Device Comparison)
- MSPM0G3529-Q1: 512KB flash, 128KB RAM
- Development kits and software (also see Tools and Software)
- Automotive qualification
- AEC-Q100 Grade 1 (-40°C to 125°C)
MSPM0G352x-Q1 microcontrollers (MCUs) are part of the MSP highly integrated, ultra-low-power 32-bit MCU family based on the enhanced Arm Cortex-M0+ 32-bit core platform, operating at up to 80MHz frequency. These MCUs offer a blend of cost optimization and design flexibility for applications requiring 256KB to 512KB of flash memory in small packages or high pin count packages (up to 100 pins). These devices include dual CAN-FD controllers, cybersecurity enablers, high performance integrated analog, and provide excellent low power performance across the operating temperature range.
The device has up to 512KB of embedded flash program memory with built-in error correction code (ECC) and up to 128KB SRAM (with ECC and parity protection for the first 64kB). The flash memory is organized into two main banks to support field firmware updates, with address swap support provided between the two main banks.
Flexible cybersecurity enablers can be used to support secure boot, secure in-field firmware updates, IP protection (execute-only memory), key storage, and more. Hardware acceleration is provided for a variety of AES symmetric cipher modes, as well as a TRNG entropy source. The cybersecurity architecture is pending Arm® PSA Level 1 certification.
A set of high performance analog modules is provided, such as two simultaneously sampling 12-bit, 4Msps ADCs supporting up to 27 external channels, on-chip voltage reference (1.4V or 2.5V), one 12-bit 1Msps DAC, and three comparators operable in low-power and high-speed modes with additional built-in 8-bit reference DACs .
The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital integration allowing for customers find the MCU that meets their project’s needs. The MSPM0 MCU platform combines the Arm Cortex-M0+ platform with a holistic ultra-low-power system architecture, allowing system designers to increase performance while reducing energy consumption.
MSPM0G352x-Q1 MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get the design started quickly. Development kits include a LaunchPad available for purchase. TI also provides a free MSPM0 Software Development Kit (SDK), which is available as a component of Code Composer Studio™ IDE desktop and cloud version within the TI Resource Explorer. MSPM0 MCUs are also supported by extensive online collateral, training with MSP Academy, and online support through the TI E2E™ support forums.
For complete module descriptions, see the MSPM0 G-Series 80MHz Microcontrollers Technical Reference Manual.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 날짜 |
|---|---|---|---|---|
| * | Data sheet | MSPM0G352x-Q1 Automotive Mixed-Signal Microcontrollers With CAN-FD Interface datasheet (Rev. B) | PDF | HTML | 2025/10/28 |
| * | Errata | MSPM0Gx51x Mixed-Signal Microcontrollers Errata (Rev. D) | PDF | HTML | 2025/12/10 |
| Application note | EMC Improvement Guide for MSPM0 (Rev. A) | PDF | HTML | 2025/12/02 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LP-MSPM0G3519 — LP-MSPM0G3519 평가 모듈
LP-MSPM0G3519 LaunchPad™ 개발 키트는 MSPM0G3519에 기반을 둔 사용이 쉬운 EVM(평가 모듈)입니다. 프로그래밍, 디버깅 및 에너지 측정을 위한 온보드 디버그 프로브를 포함하여 MSPM0G3519 M0+ MCU 플랫폼에서 개발을 시작하는 데 필요한 모든 것이 포함되어 있습니다. 보드에는 3개의 버튼, 2개의 LED(하나는 RGB LED), 80개 이상의 핀이 포함되어 있습니다. LaunchPad 후면에 있는 최적의 위치와 외부 레퍼런스 옵션으로 ADC 및 DAC 저역 필터 자리 표시자로 아날로그 결과를 (...)
LP-MSPM0G3507-OOBE — Out-of-box experience GUI for LP-MSPM0G3507
지원되는 제품 및 하드웨어
MSPM0-ANALOG-CONFIGURATOR — Analog Configurator for MSPM0
The MSPM0 analog configurator is a graphical configuration tool designed to simplify and accelerate the design and enablement of an analog signal chain using a MSPM0 device with no traditional coding development necessary.
The tool uses an intuitive GUI to configure a signal chain using the high (...)
지원되는 제품 및 하드웨어
CCSTUDIO-STARTHUB — Example application browser
지원되는 제품 및 하드웨어
MSP-MOTOR-CONTROL — MSP firmware solutions for motor control
MSP Motor Control is a collection of software, tools and examples to spin motors in 30 minutes or less with MSPM0 Arm® Cortex® M0+ MCUs and popular motor driver solutions.
MSP Motor Control provides examples for supported hardware kits to spin brushed, stepper, and three-phase motors with sensored (...)
지원되는 제품 및 하드웨어
TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud
지원되는 제품 및 하드웨어
CCSTUDIO — Code Composer Studio integrated development environment (IDE)
CCStudio™ IDE is part of TI's extensive CCStudio™ development tool ecosystem. It is an integrated development environment (IDE) for TI's microcontrollers, processors, wireless connectivity devices and radar sensors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize (...)
지원되는 제품 및 하드웨어
MSP-ZERO-CODE-STUDIO — Graphical development environment for designing applications for MSP microcontrollers
MSP Zero Code Studio is a visual design environment that simplifies firmware development, making it possible to configure, develop, and run microcontroller applications in minutes with zero coding and no IDE required. Available as a standalone download or on the cloud.
지원되는 제품 및 하드웨어
SYSCONFIG — Standalone desktop version of SysConfig
SysConfig is a configuration tool designed to simplify hardware and software configuration challenges to accelerate software development.
SysConfig is available as part of the Code Composer Studio™ integrated development environment as well as a standalone application. Additionally SysConfig (...)
지원되는 제품 및 하드웨어
MSPM0-ACADEMY — MSPM0 Academy
지원되는 제품 및 하드웨어
MSP-GANG-SOFTWARE — MSP-GANG Software
지원되는 제품 및 하드웨어
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.
UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)
지원되는 제품 및 하드웨어
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| LQFP (PM) | 64 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.