TLC272
- Wide range of supply voltages over specified temperature range:
- 0°C to 70°C: 3V to 16V
- –40°C to 125°C: 4V to 16V
- –55°C to 125°C: 4V to 16V
- Single-supply operation
- Common-mode input voltage range extends below the negative rail (C-suffix, I-suffix types)
- Low noise: typically 10.8nV/√Hz at f = 1kHz
- Output voltage range includes negative rail
- High input impedance: >1012 Ω typical
- ESD-protection circuitry
- Small-outline package option also available in tape and reel
- Designed-in latch-up immunity
The TLC272 and TLC277 precision dual operational amplifiers combine a wide range of input offset voltage grades with low offset voltage drift, high input impedance, low noise, and speeds approaching those of general-purpose BiFET devices.
The extremely high input impedance, low bias currents, and boosted slew rates make these cost effective devices an excellent choice for applications previously reserved for BiFET and NFET products.Four offset voltage grades are available (C-suffix and I-suffix types), ranging from the low-cost TLC272 (10mV) to the high-precision TLC277 (500µV). These advantages, in combination with good common-mode rejection and supply voltage rejection, make these devices a good choice for new state-of-the-art designs as well as for upgrading existing designs.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 | |
|---|---|---|---|---|---|---|
| * | 데이터 시트 | TLC27xx Precision Dual Operational Amplifiers datasheet (Rev. F) | PDF | HTML | 2026. 1. 2 | ||
| * | 정오표 | Errata for TLC272/2A/2B/2Y/77 Data Sheet SLOS091E: Error in Elec Characteristics | 2011. 4. 13 | |||
| e북 | The Signal e-book: A compendium of blog posts on op amp design topics | PDF | HTML | 2017. 3. 28 | |||
| 애플리케이션 노트 | TLC272 and TLC277 EMI Immunity Performance | 2013. 12. 31 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
AMP-PDK-EVM — 증폭기 성능 개발 키트 평가 모듈
증폭기 성능 개발 키트(PDK)는 일반적인 연산 증폭기(OP 앰프) 매개 변수를 테스트할 수 있는 평가 모듈(EVM) 키트입니다. 대부분의 연산 증폭기 및 콤퍼레이터와 호환됩니다. EVM 키트는 패키지 요구 사항에 맞는 여러 소켓형 부속 카드 옵션이 있는 메인 보드를 제공하여 엔지니어가 디바이스 성능을 신속하게 평가하고 확인할 수 있습니다.
AMP-PDK-EVM 키트는 다음을 포함해 가장 널리 사용되는 5개의 업계 표준 패키지를 지원합니다.
- D(SOIC-8 및 SOIC-14)
- PW(TSSOP-14)
- DGK(VSSOP-8)
- (...)
DIP-ADAPTER-EVM — DIP 어댑터 평가 모듈
소형 표면 실장 IC(집적 회로)와 쉽고 빠르며 경제적인 방식으로 인터페이싱하는 방법을 제공하는 DIP 어댑터 평가 모듈(DIP-ADAPTER-EVM)로 연산 증폭기 프로토타이핑 및 테스트 속도를 높이세요. 제품에 포함된 Samtec 터미널 스트립을 사용하여 지원되는 연산 증폭기를 연결하거나 기존 회로에 직접 연결할 수 있습니다.
DIP 어댑터 EVM 키트는 다음을 포함해 가장 널리 사용되는 6개의 업계 표준 패키지를 지원합니다.
- D 및 U(SOIC-8)
- PW(TSSOP-8)
- DGK(MSOP-8, VSSOP-8)
- (...)
DUAL-DIYAMP-EVM — Dual-channel universal do-it-yourself (DIY) amplifier circuit evaluation module for SOIC package
DUAL-DIYAMP-EVM은 엔지니어와 DIY 사용자에게 실제 증폭기 회로를 제공하여 설계 개념을 신속하게 평가하고 시뮬레이션을 검증할 수 있게 해주는 평가 모듈(EVM) 제품군입니다. 이는 업계 표준 SOIC-8 패키지의 듀얼 패키지 연산 증폭기를 위해 특별히 설계되었습니다. 반전 및 비반전 증폭기, Sallen-Key 필터, 다중 피드백 필터, 레퍼런스 버퍼를 사용하는 차동 증폭기, 듀얼 피드백 기반의 Riso, 단일 종단 입력 대비 차동 출력, 차동 입력 대비 차동 출력, 2연산 증폭기 구성의 계측 증폭기, 병렬 연산 (...)
PMP10081 — 20W SEPIC 저비용 납산 배터리 충전기 레퍼런스 디자인
The PMP10081 reference design shows a simple and low-cost solution of a lead acid battery charger. The input voltage range is from 9V to 36V and the maximum output voltage is 13.8V, which is sufficient for a six-cell lead acid battery with a charge current up to 1.5A.
PMP10110 — PFC를 지원하는 범용 AC 입력 30Vmax의 6A 납산 배터리 충전기 레퍼런스 디자인
The PMP10110 design converts the universal input AC voltage to isolated 17V...30V@6A and is suitable to charge lead-acid or Li-Ion batteries. The converter is a constant-V and constant-I genarator and the set points for output voltage (charge level) and current are settable by means of two PWM (...)
PMP30104 — 곱하기 SEPIC SEPIC 정전류 커패시터 충전기(15Vin~400V/420Vout@80mA) 레퍼런스 디자인
PMP30157 — 저렴한 10S 리튬 이온 배터리 충전기 레퍼런스 디자인
PMP30162 — SEPIC 토폴로지를 사용한 고속 커패시터 충전기(42V~52Vin, 160V/180Vout @ 900mA) 레퍼런스 디자인
PMP8740 — 92%의 전부하 효율을 지원하는 2kW 산업용 AC/DC 배터리 충전기 레퍼런스 설계
PMP9622 — 350W 정전압 - 정전류(CVCC) 위상 전환 풀 브리지 레퍼런스 디자인
This reference design uses the UCC3895 Phase-Shifted Full Bridge controller to implement a high efficiency, 120VAC input to 44Vdc up to 8A output. The power supply is set up to be constant voltage-constant current. The voltage and current are set by fixed resistor values and could (...)
TIDA-00200 — 배터리 충전 애플리케이션을 위한 120V AC 200W, 90% 효율성, 인터리브 플라이백 레퍼런스 디자인
TIDA-00200은 부품 명세서를 최소화하면서 약 200W의 출력 전력이 필요한 배터리 충전기 애플리케이션을 위한 인터리브 플라이백 토폴로지를 제안합니다. 실제 전자 부품 외에도 냉각을 위한 노력이 전체 설계 비용의 주요 원인입니다. LM5032 고전압 듀얼 인터리브 전류 모드 컨트롤러를 활용함으로써 이 설계는 최대 부하에서 90%의 높은 효율을 달성하고 냉각 작업을 줄이기 위해 열을 분산시킵니다. 팬은 일반적으로 필요하지 않습니다. 더 작은 폼 팩터 히트 싱크가 필요하므로 추가적인 설계 유연성을 제공합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |
| TSSOP (PW) | 8 | Ultra Librarian |
| PDIP (P) | 8 | Ultra Librarian |
| SOP (PS) | 8 | Ultra Librarian |