TPS61240
- Efficiency > 90% at Nominal Operating Conditions
- Total DC Output Voltage Accuracy 5.0 V±2%
- Typical 30-µA Quiescent Current
- Best in Class Line and Load Transient
- Wide VIN Range From 2.3 V to 5.5 V
- Output Current up to 450 mA
- Automatic PFM/PWM Mode Transition
- Low Ripple Power Save Mode for Improved
Efficiency at Light Loads - Internal Softstart, 250-μs Typical Start-Up Time
- 3.5-MHz Typical Operating Frequency
- Load Disconnect During Shutdown
- Current Overload and Thermal Shutdown
Protection - Three Surface-Mount External Components
Required (One MLCC Inductor, Two Ceramic
Capacitors) - Total Solution Size <13 mm2
- Available in a 6-Pin DSBGA and 2-mm × 2-mm
WSON Package
The TPS6124x device is a highly efficient synchronous step-up DC-DC converter optimized for products powered by either a three-cell alkaline, NiCd or NiMH, or one-cell Li-Ion or Li-Polymer battery. The TPS6124x supports output currents up to 450 mA. The TPS61240 has an input valley current limit of 500 mA, and the TPS61241 has an input valley current of 600 mA.
With an input voltage range of 2.3 V to 5.5 V, the device supports batteries with extended voltage range and are ideal to power portable applications like mobile phones and other portable equipment. The TPS6124x boost converter is based on a quasi-constant on-time valley current mode control scheme.
The TPS6124x presents a high impedance at the VOUT pin when shut down. This allows for use in applications that require the regulated output bus to be driven by another supply while the TPS6124x is shut down.
During light loads the device will automatically pulse skip allowing maximum efficiency at lowest quiescent currents. In the shutdown mode, the current consumption is reduced to less than 1 µA.
TPS6124x allows the use of small inductors and capacitors to achieve a small solution size. During shutdown, the load is completely disconnected from the battery. The TPS6124x is available in a 6-pin DSBGA and 2-mm × 2-mm WSON package.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 | |
|---|---|---|---|---|---|---|
| * | 데이터 시트 | TPS6124x 3.5-MHz High Efficiency Step-Up Converter datasheet (Rev. D) | PDF | HTML | 2015. 12. 15 | ||
| 기술 문서 | 더 작고 더 오래 가는 웨어러블 기기를 설계하는 방법 | PDF | HTML | 2026. 5. 22 | |||
| 애플리케이션 노트 | QFN and SON PCB Attachment (Rev. C) | PDF | HTML | 2023. 12. 6 | |||
| 애플리케이션 노트 | 스트컨버터의 전력계 기본 계산 (Rev. D) | PDF | HTML | Download English Version (Rev.D) | 2022. 11. 21 | ||
| 애플리케이션 노트 | Performing Accurate PFM Mode Efficiency Measurements (Rev. A) | 2018. 12. 11 | ||||
| 선택 가이드 | Power Management Guide 2018 (Rev. R) | 2018. 6. 25 | ||||
| 애플리케이션 노트 | Extending the Soft Start Time Without a Soft Start Pin (Rev. B) | 2017. 6. 15 | ||||
| 애플리케이션 노트 | Five Steps to a Good PCB Layout of the Boost Converter | PDF | HTML | 2016. 5. 3 | |||
| 테스트 보고서 | Power Management Reference Design for a Wearable Device with Wireless Charging (Rev. A) | PDF | HTML | 2016. 4. 14 | |||
| 애플리케이션 노트 | Design of UVLO for LM27313 (Rev. B) | 2014. 4. 8 | ||||
| 아날로그 디자인 학술지 | IQ: What it is, what it isn’t, and how to use it | 2011. 6. 17 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DP149RSBEVM — DP149 3.4Gbps DP++ ~ HDMI 리타이머 평가 모듈
DP149RSBEVM은 고객이 비디오 애플리케이션용 DP149 장치를 평가할 수 있도록 만들어진 PCB입니다. 이 EVM은 RSB 패키지의 DP149 구현을 위한 하드웨어 레퍼런스 설계로도 사용할 수 있습니다. 라우팅/배치 규칙에 대한 PCB 설계 그림을 제공하도록 요청하면 PCB 설계/레이아웃 파일을 제공할 수 있습니다.
DP159RGZEVM — DP159RGZEVM 평가 모듈
The DP159RSBEVM is a PCB created to help customers evaluate the DP159 device for video applications. The EVM has a DP connection for the source and a HDMI connection for the sink. J2 is a standard DP connector (Molex 47272-0001). P2 is a standard HDMI connector (Molex (...)
DP159RSBEVM — DP159RSBEVM 평가 모듈
The DP159RSBEVM is a PCB created to help customers evaluate the DP159 device for video applications. The EVM has a DP connection for the source and a HDMI connection for the sink. J2 is a standard DP connector (Molex 47272-0001). P2 is a standard HDMI connector (Molex (...)
EVM430-FR6043 — MSP430FR6043 초음파 센서 평가 모듈
MMWAVEICBOOST — mmWave 센서 캐리어 카드 플랫폼
MMWAVEICBOOST 캐리어 카드는 일부 60GHz mmWave 평가 모듈의 기능을 확장합니다. 이 보드는 TI의 Code Composer 호환 디버거를 통해 추적 및 단일 스텝과 같은 고급 소프트웨어 개발, 디버그 기능을 제공합니다. 온보드 LaunchPad 인터페이스를 이용하면 추가 센서 및 무선 연결을 위해 TI의 BoosterPack™ 호환 하드웨어와 페어링할 수 있습니다. TI의 LaunchPad 에코시스템은 더 넓은 주변 기기 세트와 연결에 대한 MMWAVEICBOOST 액세스를 지원합니다.
(...)
TDP158RSBEVM — TMDS & HDMI™ 리드라이버와 결합된 6Gbps AC 평가 모듈
TMDS171RGZEVM — TMDS171 RGZ 패키지의 3.4Gbps TMDS 리타이머 평가 모듈
TMDS171 EVM은 고객이 HDMI 인터페이스가 있는 비디오 애플리케이션용 TMDS171 장치를 평가할 수 있도록 만들어진 PCB입니다. 이 EVM은 RGZ 패키지의 TMDS171 구현을 위한 하드웨어 레퍼런스 설계로도 사용할 수 있습니다. TMDS171 또는 DP159 RGZ 부품을 사용한 라우팅/배치 규칙에 대한 PCB 설계 그림을 제공하도록 요청하면 PCB 설계/레이아웃 파일을 제공할 수 있습니다.
TMDS181RGZEVM — TMDS181 RGZ 패키지의 6Gbps TMDS 리타이머 평가 모듈
TPS61240EVM-360 — TPS61240EVM-360 평가 모듈
The TPS61240EVM-260 facilitates evaluation of the TPS61240 IC. There are three circuits on the EVM:
CKT1 will demonstrate the TPS61240DRV (SON) package.
CKT2 will demonstrate the TPS61240YFF (WCSP) package in a small layout.
CKT3 will demonstrate the TPS61240YFF operating in a diode OR configuration.
Unecrypted TPS61240 PSpice Transient Model Package (Rev. A)
PMP11311 — bq51003 및 bq25120을 사용한 무선 충전이 가능한 웨어러블 장치용 전원 레퍼런스 설계
Wearable devices require advanced power management to achieve long battery run times with always-on functionality. Additionally, the devices need to use small rechargeable batteries and enable small footprint designs. This application note shows the implementation of a scalable power (...)
TIDA-01401 — 절대 인코더용 높은 EMC 내성 RS-485 인터페이스 레퍼런스 설계
TIDA-01630 — Tamagawa 인코더용 높은 EMC 내성 RS485 인터페이스 레퍼런스 설계
TIDEP-01008 — Jacinto™ ADAS 프로세서의 다중 센서 플랫폼 레퍼런스 설계
D3 Engineering의 ADAS(첨단 운전자 보조 시스템)를 위한 멀티 센서 플랫폼 레퍼런스 설계는 자격을 갖춘 개발자에게 주로 자동차 산업에서 사용할 수 있는 ADAS 애플리케이션의 테스트와 개발을 위한 완전한 기능을 갖춘 평가 플랫폼을 제공합니다. D3는 또한 이 레퍼런스 설계와 함께 작동하는 ADAS 임베디드 프로세서(예: TDA3x)로 구성된 시스템 온 모듈(SOM) 솔루션도 제공합니다.
TIDM-02003 — 가스 유량 측정을 위한 초음파 센서 서브시스템 레퍼런스 설계
TIDM-02005 — 유량 측정을 위한 최적화된 초음파 센서 계측 레퍼런스 설계
이 레퍼런스 설계는 설계자가 통합형 초음파 센서 솔루션(USS) 모듈을 사용하여 비용 최적화된 초음파 가스 계량기 서브 시스템을 설계하도록 지원하며, 이를 통해 저전력 소비 및 최대 통합으로 탁월한 계측 성능을 제공할 수 있습니다. 이 설계는 고속, ADC 기반 신호 수집 및 통합 LEA(저에너지 가속기)가 통합된 64KB MSP430FR6043 MCU(마이크로컨트롤러)를 기반으로 하며 디지털 신호 처리를 최적화합니다.
TIPA-050000 — 산업용 애플리케이션을 위한 AM68x 기본 기능, eFuse, SD 카드 및 USB2.0 전원 공급 장치 솔루션
AM68x 프로세서용의 이 전원 공급 장치 솔루션은 SK-AM68 프로세서 스타터 키트에서 사용되는 저비용, 작은 크기 및 비안전 전원 설계를 위해 설계되었습니다. 시스템 절충점과 설계 이점을 검토하는 선택 가이드가 포함되어 있습니다. 이 가이드는 전원 설계 선택 및 기능 세트 비교를 지원합니다.
아래에 설명된 LP8733x 전원 설계는 시스템의 원하는 기능에 따라 AM68x 프로세서를 공급하는 4가지 PDN(전력 분배 네트워크) 변형을 제공합니다. 각 PDN-6x 버전에 대한 PDN 기능, 옵션 기능, 유연성 및 설계 이점을 (...)
TIPA-050001 — 산업용 애플리케이션을 위한 AM68x 기본 기능, eFuse 및 SD 카드 전원 공급 장치 솔루션
AM68x 프로세서용의 이 전원 공급 장치 솔루션은 SK-AM68 프로세서 스타터 키트에서 사용되는 저비용, 작은 크기 및 비안전 전원 설계를 위해 설계되었습니다. 시스템 절충점과 설계 이점을 검토하는 선택 가이드가 포함되어 있습니다. 이 가이드는 전원 설계 선택 및 기능 세트 비교를 지원합니다.
이 가이드에 설명된 LP8733x 전원 설계는 시스템의 원하는 기능에 따라 AM68x 프로세서를 공급하는 4가지 PDN(전력 분배 네트워크) 변형을 제공합니다. 각 PDN-6x 버전에 대한 PDN 기능, 옵션 기능, 유연성 및 설계 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| DSBGA (YFF) | 6 | Ultra Librarian |
| WSON (DRV) | 6 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.