홈 인터페이스 USB IC USB 허브 및 컨트롤러
홈
인터페이스
USB IC
USB 허브 및 컨트롤러

TUSB1211

구형

BC 1.2를 지원하는 고속 480Mbps USB 2.0 OTG 트랜시버

지금 주문
데이터 시트

TUSB1211

구형
데이터 시트 지금 주문

제품 상세 정보

Function USB2 USB speed (Mbps) 480 Type Transceiver Rating Catalog Operating temperature range (°C) -40 to 85
Function USB2 USB speed (Mbps) 480 Type Transceiver Rating Catalog Operating temperature range (°C) -40 to 85
JRBGA (ZRQ) 36 12.25 mm² 3.5 x 3.5
  • USB2.0 PHY Transceiver Chip, Designed to
    Interface With a USB Controller Through a ULPI
    Interface, Fully Compliant With:
    • Universal Serial Bus Specification Rev. 2.0
    • On-The-Go Supplement to the USB 2.0
      Specification       Rev. 1.3
    • UTMI+ Low Pin Interface (ULPI) Specification
      Rev. 1.1
  • DP/DM Line External Component Compensation
    (Patent #US7965100 B1)
  • Interfaces to Host, Peripheral, and OTG Device
    Cores; Optimized for Portable Devices or System
    ASICs With Built-in USB OTG Device Core
  • Complete USB OTG Physical Front-End
  • USB Battery Charger Detection Feature
  • USB HS Start-of-Frame Clock Output Feature
    Available on SOF Pin Can be Used to Synchronize
    Another Application, for Example Audio, With the
    USB Packet Stream
  • ULPI Interface:
    • I/O Interface (1.8 V) Optimized for Non-
      Terminated 50-Ω Line Impedance
    • ULPI CLOCK Pin (60 MHz) Supports Both Input
      and Output Clock Configurations
    • Fully Programmable ULPI-Compliant Register Set
  • Full Industrial-Grade Operating Temperature
    Range from –40°C to 85°C
  • Available in a TFBGA36 Ball Package
  • USB2.0 PHY Transceiver Chip, Designed to
    Interface With a USB Controller Through a ULPI
    Interface, Fully Compliant With:
    • Universal Serial Bus Specification Rev. 2.0
    • On-The-Go Supplement to the USB 2.0
      Specification       Rev. 1.3
    • UTMI+ Low Pin Interface (ULPI) Specification
      Rev. 1.1
  • DP/DM Line External Component Compensation
    (Patent #US7965100 B1)
  • Interfaces to Host, Peripheral, and OTG Device
    Cores; Optimized for Portable Devices or System
    ASICs With Built-in USB OTG Device Core
  • Complete USB OTG Physical Front-End
  • USB Battery Charger Detection Feature
  • USB HS Start-of-Frame Clock Output Feature
    Available on SOF Pin Can be Used to Synchronize
    Another Application, for Example Audio, With the
    USB Packet Stream
  • ULPI Interface:
    • I/O Interface (1.8 V) Optimized for Non-
      Terminated 50-Ω Line Impedance
    • ULPI CLOCK Pin (60 MHz) Supports Both Input
      and Output Clock Configurations
    • Fully Programmable ULPI-Compliant Register Set
  • Full Industrial-Grade Operating Temperature
    Range from –40°C to 85°C
  • Available in a TFBGA36 Ball Package

The TUSB1211 device is a USB2.0 transceiver chip, designed to interface with a USB controller through a ULPI interface. The device supports all USB2.0 data rates (high-speed 480 Mbps, full-speed 12 Mbps and low-speed 1.5 Mbps), and is compliant to both Host and Peripheral modes. The TUSB1211 also supports a UART mode and legacy ULPI serial modes.

The TUSB1211 device supports the OTG (Ver1.3) optional addendum to the USB 2.0 Specification, including Host Negotiation Protocol (HNP) and Session Request Protocol (SRP). TUSB1211 also supports USB Battery Charging Specification Ver1.1 integrating a charger detection module for sensing and control on DP/DM lines, and ACA (Accessory Charger Adapter) detection and control on ID line.

The DP/DM external component compensation in the transmitter compensates for variations in the series impendence to match with the data line impedance and the receiver input impedance, to limit data reflections and, thereby, improve eye diagrams.

The TUSB1211 device is a USB2.0 transceiver chip, designed to interface with a USB controller through a ULPI interface. The device supports all USB2.0 data rates (high-speed 480 Mbps, full-speed 12 Mbps and low-speed 1.5 Mbps), and is compliant to both Host and Peripheral modes. The TUSB1211 also supports a UART mode and legacy ULPI serial modes.

The TUSB1211 device supports the OTG (Ver1.3) optional addendum to the USB 2.0 Specification, including Host Negotiation Protocol (HNP) and Session Request Protocol (SRP). TUSB1211 also supports USB Battery Charging Specification Ver1.1 integrating a charger detection module for sensing and control on DP/DM lines, and ACA (Accessory Charger Adapter) detection and control on ID line.

The DP/DM external component compensation in the transmitter compensates for variations in the series impendence to match with the data line impedance and the receiver input impedance, to limit data reflections and, thereby, improve eye diagrams.
filter 기타 USB 허브 및 컨트롤러 찾기
다운로드

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
1개 모두 보기
유형 직함 날짜
* Data sheet TUSB1211 Stand-Alone USB Transceiver Chip datasheet (Rev. B) PDF | HTML 2015/06/30

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치